Noctua NH-U12S Chromax Manual de Usario
Noctua
Refrigeración de hardware
NH-U12S Chromax
Lee a continuación 📖 el manual en español para Noctua NH-U12S Chromax (6 páginas) en la categoría Refrigeración de hardware. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/6
Caution: The supplied backplate will install over the mother-
board’s stock backplate, so the motherboard’s stock backplate
must not be taken off.
Attaching the backplate2
Place the backplate on the rear side of the motherboard so that
the bolts stick through the mounting holes.
Caution: Please make sure that the three cut-outs in the
supplied backplate align with the screws of the motherboard’s
stock backplate.
First put the plastic spacers onto the bolts of the backplate, then
add the mounting bars.
Installing the mounting bars3
Caution: Choose the alignment of the mounting bars according
to the desired nal orientation of the cooler:
Orientation A Orientation B
Caution: Make sure that the curved sides of the mounting bars
are pointing outwards.
Fix the mounting bars using the 4 thumb screws.
Caution: Gently tighten the screws until they stop, but don’t use
excessive force (max. torque 0.6 Nm).
If there are residual traces of thermal paste or thermal pads on
your CPU, please clean them off rst. Then press a small drop
(3-4mm diameter) of NT-H1 onto the centre of the heatspreader.
Applying the thermal paste
Caution: Applying too much thermal paste will lower heat
conductivity and cooling performance!
4
Dear customer,
Congratulations on choosing the Noctua NH-U12S chromax.
black. The NH-U12S is the latest version of Noctua’s award-
winning NH-U12 coolers. First introduced in 2005, the
NH-U series has become a standard choice for premium
quality quiet CPU coolers and won more than 400 awards
and recommendations from leading international hardware
websites and magazines. Enjoy your NH-U12S!
Yours sincerely,
Roland Mossig, Noctua CEO
This manual will guide you through the installation process of
the SecuFirm2™ mounting system step by step.
Prior to installing the cooler, please consult the compatibility list
on our website (www.noctua.at/compatibility) and verify that
the cooler is fully compatible with your motherboard. Please
also make sure that your PC case offers sufcient clearance
for the cooler and that there are no compatibility issues with
any other components (e.g. tall RAM modules). Double check
that the heatsink and fan clips do not make contact with
the VGA card or other PCIe cards. Noctua cannot be held
responsible for any damage or losses caused by compatibility
issues. Should you encounter any difculties, please check the
FAQs on our website (www.noctua.at/faqs) and don’t hesitate
to contact our support team at support@noctua.at.
Multilingual versions of this manual are available on our web-
site: www.noctua.at/manuals
Required mounting parts:
2x NM-IMB3 mounting bars1x NM-IBP2 backplate
4x NM-ITS1 thumb screws
In case you want to use the cooler on an assembled system
and your case doesn’t have a cut-out at the rear side of the
motherboard tray, you rst have to remove the motherboard
from the case in order to be able to install the supplied
backplate.
Removing the motherboard1
4x NM-IPS1 spacers
NOCTUA NH-U12S chromax.black
INSTALLATION MANUAL
LGA115x
Scan this code to display
multilingual manuals on
your phone.
Fastening the heatsink to the CPU5
Caution: Please rst take off the fans as well as the protection
cover at the bottom side of the heatsink.
Reattach the fan to the heatsink using the supplied steel clips:
Fan setup6
Then put the heatsink onto the CPU and screw it to the screw
threads of the mounting bars. Perform 2-3 turns on each
screw, then repeat until both are fully tightened.
Caution: Gently tighten the screws until they stop, but don’t use
excessive force (max. torque 0.6 Nm).
NOCTUA NH-U12S chromax.black
INSTALLATION MANUAL
LGA115x
Scan this code to display
multilingual manuals on
your phone.
1.
2.
3.
Clip position for standard spacers:
Clip position for thick spacers:
While Noctua recommends using an NF-F12 fan for best
results in dual fan mode, the extra set of fan clips can also
be used to install most other fans. In this case, please put the
supplied self-adhesive anti-vibration strips onto the heatsink to
avoid vibrations being transmitted to the cooler.
Even with high-grade products and strict quality control, the
possibility of defects cannot be eliminated entirely. Therefore,
we aim at providing the highest possible level of reliability and
convenience by offering a warranty period of 6 years and
direct, fast and straightforward RMA service.
Should you encounter any problems with your NH-U12S
chromax.black, please don’t hesitate to contact our support
team (support@noctua.at).
Please also consult the FAQ section on our website:
www.noctua.at/faqs.
Warranty, support and FAQs!
As it is not possible to reliably calculate or control the forces
that act upon a system during transport (e.g. in shipping), we
generally recommend, for safety reasons, taking the fan off the
heatsink in order to reduce the weight below 700g. Noctua
cannot be held responsible for any damage that may arise
due to excessive stress during transport if you keep the fan
installed.
Transporting your system!
Connect the fan to the motherboard’s CPU fan header.
Depending on your CPU and the temperature inside the case,
you may interconnect the supplied NA-RC6 Low-Noise Adaptor
(L.N.A.) in order to further reduce the fan’s operating noise.
Caution: When using the L.N.A., check the temperature of your
CPU using appropriate software (e.g. the respective applications
of your motherboard manufacturer), in order to evade automatic
throttling of the CPU due to the increased temperature. If the
cooling performance is insufcient, please increase case ventila-
tion or remove the L.N.A.
Adding a second fan
The NH-U12S includes an extra set of fan clips and an extra
set of thicker anti-vibration pads for installing a second NF-
F12 fan in push/pull mode in order to further improve cooling
performance.
Please use the thicker anti-vibration pads on the rear NF-F12
fan for improved acoustics if space allows.
The y-cable supplied with the retail NF-F12 fan can be used
to control the speed of both fans via the same motherboard
fan header.
Airow
Front fan (standard spacers)
Rear fan (thick spacers)
1. Remove standard spacers on rear fan
2. Install thick spacers on rear fan
First screw the NM-IBT2 bolts into the screw threads of the
LGA20xx socket frame.
Installing the mounting bars1
Then put the NM-IMB3 mounting-bars onto the bolts.
Caution: Choose the alignment of the mounting bars according
to the desired nal orientation of the cooler:
Caution: Choose the alignment of the mounting bars according
to the desired nal orientation of the cooler:
Orientation A Orientation B
Dear customer,
Congratulations on choosing the Noctua NH-U12S chromax.
black. The NH-U12S is the latest version of Noctua’s award-
winning NH-U12 coolers. First introduced in 2005, the
NH-U series has become a standard choice for premium
quality quiet CPU coolers and won more than 400 awards
and recommendations from leading international hardware
websites and magazines. Enjoy your NH-U12S!
Yours sincerely,
Roland Mossig, Noctua CEO
This manual will guide you through the installation process of
the SecuFirm2™ mounting system step by step.
Prior to installing the cooler, please consult the compatibility
list on our website (www.noctua.at/compatibility) and verify
that the cooler is fully compatible with your motherboard.
Please also make sure that your PC case offers sufcient
clearance for the cooler and that there are no compatibility
issues with any other components (e.g. tall RAM modules).
Double check that the heatsink and fan clips do not make
contact with the VGA card or other PCIe cards. Noctua cannot
be held responsible for any damage or losses caused by
compatibility issues.
Should you encounter any difculties, please check the FAQs
on our website (www.noctua.at/faqs) and don’t hesitate to
contact our support team at support@noctua.at.
Multilingual versions of this manual are available on our web-
site: www.noctua.at/manuals
Required mounting parts:
2x NM-IMB3 mounting bars
4x NM-ITS1 thumb screws4x NM-IBT2 bolts
Caution: Make sure that the curved sides of the mounting bars
are pointing outwards.
Fix the mounting bars using the 4 thumb screws.
Caution: Gently tighten the screws until they stop, but don’t use
excessive force (max. torque 0.6 Nm).
If there are residual traces of thermal paste or thermal pads
on your CPU, please clean them off rst. Then press a small
drop (4-5mm diameter) of NT-H1 onto the centre of the
heatspreader.
Applying the thermal paste
Caution: Applying too much thermal paste will lower heat
conductivity and cooling performance!
2
NOCTUA NH-U12S chromax.black
INSTALLATION MANUAL
LGA20xx
Scan this code to display
multilingual manuals on
your phone.
Caution: Please rst take off the fans as well as the protection
cover at the bottom side of the heatsink.
Fastening the heatsink to the CPU3
Then put the heatsink onto the CPU and screw it to the screw
threads of the mounting bars. Perform 2-3 turns on each
screw, then repeat until both are fully tightened
Especificaciones del producto
| Marca: | Noctua |
| Categoría: | Refrigeración de hardware |
| Modelo: | NH-U12S Chromax |
¿Necesitas ayuda?
Si necesitas ayuda con Noctua NH-U12S Chromax haz una pregunta a continuación y otros usuarios te responderán
Refrigeración de hardware Noctua Manuales
22 Octubre 2024
22 Octubre 2024
26 Septiembre 2024
26 Septiembre 2024
24 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
Refrigeración de hardware Manuales
- Refrigeración de hardware Apc
- Refrigeración de hardware Akasa
- Refrigeración de hardware Tristar
- Refrigeración de hardware Asus
- Refrigeración de hardware SilverStone
- Refrigeración de hardware Thermaltake
- Refrigeración de hardware Daikin
- Refrigeración de hardware Gigabyte
- Refrigeración de hardware Be Quiet!
- Refrigeración de hardware Cooler Master
- Refrigeración de hardware Corsair
- Refrigeración de hardware NZXT
- Refrigeración de hardware Cougar
- Refrigeración de hardware Arctic Cooling
- Refrigeración de hardware Alpenföhn
- Refrigeración de hardware Dynatron
- Refrigeración de hardware Zalman
- Refrigeración de hardware StarTech.com
- Refrigeración de hardware Antec
- Refrigeración de hardware Savio
- Refrigeración de hardware EVOLVEO
- Refrigeración de hardware In Win
- Refrigeración de hardware Enermax
- Refrigeración de hardware AeroCool
- Refrigeración de hardware ENDORFY
- Refrigeración de hardware Mars Gaming
- Refrigeración de hardware Chieftec
- Refrigeración de hardware DeepCool
- Refrigeración de hardware Thermalright
- Refrigeración de hardware Alphacool
- Refrigeración de hardware AZZA
- Refrigeración de hardware ALSEYE
- Refrigeración de hardware CoolerMaster
- Refrigeración de hardware Iceberg Thermal
- Refrigeración de hardware Raijintek
- Refrigeración de hardware Bitspower
- Refrigeración de hardware EK Water Blocks
- Refrigeración de hardware Middle Atlantic Products
- Refrigeración de hardware Cryorig
Últimos Refrigeración de hardware Manuales
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
7 Octubre 2024
4 Octubre 2024
23 Septiembre 2024
22 Septiembre 2024