Ozito PDS-2000 Manual de Usario

Ozito lijadora PDS-2000

Lee a continuación 📖 el manual en español para Ozito PDS-2000 (6 páginas) en la categoría lijadora. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

PORTABLE

DRYWALL

SANDER

225MM (9”)

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 230-240V ~ 50Hz

Power: 1200W

No Load Speed: 1,500-2,300/min

Sandpaper Diameter: 225mm

Dust Port: 35mm

Weight: 2.75kg

WHAT’S IN THE BOX

Drywall Sander

Dust Hose & Bag

Shoulder Belt

Side Handle

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

Hex Key

Sand Paper x 8

PDS-2000

0816

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase and is intended for DIY (Do It

Yourself) use only. If a product is defective it will be replaced in

accordance with the terms of this warranty. Warranty excludes

consumable parts, for example: carbon brushes, dust bag, backing

pads, etc.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1 Variable Speed Dial

2 Lock-On Button

3 On/Off Trigger

4 Sure Grip Handle

5 Side Handle

6 Hook & Loop Sanding Base

7 Vacuum Speed Control

8 Dust Extraction Port

KNOW YOUR PRODUCT

5 6 7

1 2 3 4

1. SANDING SHEET FITMENT

9 Dust Hose

10 Dust Bag

11 Shoulder Belt

12 Sand Paper x 8

13 Hex Key

ACCESSORIES

PORTABLE DRYWALL SANDER

SETUP & PREPARATION

119 10 12 13

CAUTION: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE PERFORMING

ANY OF THE FOLLOWING OPERATIONS.

2 Once the holes are aligned,

press the sanding sheet

rmly onto the hook and

loop sanding pad.

3 To remove the sanding

sheet simply peel the sheet

off the pad.

1 Align the holes on the sheet with the holes on the sanding pad.

The holes on the bottom of the sanding pad allow dust to be

removed from the work piece through the dust hose and into the

dust bag.

3. SIDE HANDLE & SHOULDER BELT

2. DUST BAG

The dust hose and dust bag allow for dust to be captured for easy

clean up and should be tted to help maintain a clean and health

working environment.

The supplied shoulder belt can be attached to the tool to help carry

some of the weight of the tool.

The dust bag has a handle to allow you to carry the dust bag with

you while you operate the tool around the room.

Fitting the Dust Bag and Hose

Sander Shoulder Belt

Dust Bag Carry Handle

Attaching the Side Handle

Emptying the Dust Bag

1 Push the end of the dust

hose onto the dust port at

the back of the tool.

1 Attach the clips at the end

of the belt to the hooks on

the front of the sander.

1 Position the dust bag over a

bin and slide the plastic clip

at the base of the dust bag

sideways.

2 To remove the dust

bag and hose, pull

the end of the hose

off the tools dust port.

2 Place the belt over

your shoulder.

2 Once emptied, slide

the plastic clip back

onto the base of the

dust bag to seal the

bag.

The dust bag should be

emptied when the bag

is half full, to maintain

optimal dust extraction.

1 Place the carry

handle over your

shoulder.

1 Attach the side

handle by rotating

clockwise into 1 of

the 2 holes either

side of the tool.

Especificaciones del producto

Marca:	Ozito
Categoría:	lijadora
Modelo:	PDS-2000
Tipo de operación:	Touch
Color del producto:	Zwart, zilver
Peso.:	42500 g
Ancho:	675 mm
Profundidad:	750 mm
Altura:	1130 mm
Nivel de ruido:	55 dB
Kijkglas:	Ja
El número de ruedas:	4 wiel(en)
Dimensiones ISO serie A (A0...A9):	A4
Ruedas:	Ja
Peso del medio:	80 g/m²
hombre volumen:	110 l
Anchura de trabajo:	230 mm
Triturar papel:	Ja
Trituración de tarjetas de crédito:	Ja
Destruye al tamaño:	4x36 mm
Capacidad de la destructora de documentos:	600 vel
tipo de destructor:	Kruisversnippering
Procesa grapas:	Ja
Procesa clips de papel:	Ja
Nivel de seguridad:	P-4
Indicación de uso:	240 min
Mecanismo antiobstrucción:	Ja
Indicador de bandeja de salida llena:	Ja