Ozito PXCSDMS-018 Manual de Usario

Ozito Cortacésped PXCSDMS-018

Lee a continuación 📖 el manual en español para Ozito PXCSDMS-018 (6 páginas) en la categoría Cortacésped. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

BRUSHLESS STEEL

DECK MOWER

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Voltage: 2 x 18V

Cutting Diameter: 470mm

Cutting Heights: 30 - 65mm, 6 position

No Load Speed: 3,300/min

Grass Catcher: 75 litres

Weight (Tool Only): 27kg

PXCSDMS-018

Brushless Lawn Mower

Handle Securing Set x 4, Cable

Clip

ozito.com.au

Mulching Plug

Side Ejector Adaptor

Safety Key, Cleaning Scraper

STANDARD EQUIPMENT

WARRANTY

0418

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE

WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING

YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER

SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

The benets provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer service helpline

above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty. Warranty excludes consumable parts, for example: grass catcher,

wheels, blade, cord clips, bearings etc..

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

13. Safety Key

14. Cleaning Scraper

15. Side Ejector Adaptor

16. Mulching Plug

1. Wheels

2. Side Ejector Cover

3. Battery Cover x 2

4. Grass Catcher Flap

5. Catcher Flap Locking Lever

6. Safety Switch

7. Start/Stop Lever

8. Upper Handle

9. Handle Securing Knob

10. Lower Handle

11. Grass Catcher

12. Cutting Deck

BRUSHLESS LAWN MOWER

KNOW YOUR PRODUCT

5 6 7 8

13 14

1. ASSEMBLY

SETUP & PREPARATION

1. Place the upper handle over the

upper ends of the lower handle.

1. Place the lower handle

onto the lower handle

bracket. From the handle

securing set, t the bolt

through mounting bracket

then through hole in lower

handle.

Fitting the Upper Handle

Fitting the Lower Handles

WARNING! ENSURE THE TOOL IS SWITCHED OFF

AND BATTERIES ARE DISCONNECTED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

ACCESSORIES

2. From the handle securing set, t

the bolts through the inner side of

the lower handle and then through

the holes in the upper handle.

3. Place a washer and handle

securing knobs over the

protruding ends of the bolts.

2. Secure with washer and knob.

BATTERY & CHARGER

This tool is compatible with all batteries and chargers from the Ozito

Power X Change Range.

3. Repeat this process on the other side for the second lower handle.

Note: There are 3 holes on each

end of the upper handle, select the

appropriate hole for the height of the

user.

2. PREPARATION

1. Lift up the grass catcher ap with

one hand and guide the catcher

with your other hand onto the

mower housing.

3. To remove, raise the grass

catcher ap and lift the grass

catcher out.

2. Lower the grass catcher and allow

it to sit in place. Lower the grass

catcher ap.

Adjusting the Cutting Height

Fitting and Removing the Grass Catcher

IMPORTANT! ONLY FIT AND REMOVE THE CATCHER

WHEN THE MOWER IS SWITCHED OFF AND THE

MOTOR HAS COME TO A STOP.

1. Locate cord on lower handle. Push

the supplied cord clip over the lower

handle. Place the cable onto the

cord clip to secure in place.

Note: Care should be taken not to

pinch the cord when folding down the

handle.

Securing the Cord

Ensure the cord follows the handle

smoothly from the switch to the body of

the mower.

Note: The grass catcher ap is held

against the grass catcher by a spring.

The height adjustment lever provides 6 cutting heights from 30mm to 65mm.

1. Pull lever outwards away from

the mower body.

2. Adjust until the required cutting

height is selected.

3. Release lever and check that it is

securely seated in the required

cutting height position.

WARNING! WHEN FITTING THE GRASS CATCHER

AFTER EMPTYING, ALWAYS ENSURE THERE IS NO

BUILD UP OF GRASS IN THE GRASS CHUTE.

Grass Catcher Indicator

The grass catcher is tted with an

indicator at the rear of the catcher to

help identify when to empty.

If the indicator drops down while

operating then the grass catcher is full

and needs emptying.

Mulching Adaptor

Side Ejector

In mulching mode the cuttings are shredded in the enclosed mower housing

and then spread back onto the lawn.

IMPORTANT! MULCHING IS ONLY POSSIBLE IF THE

LAWN IS RELATIVELY SHORT.

1. To use the mulching function,

remove the grass catcher, slide

the mulching plug through the

ejector opening and close the

grass catcher ap.

Note: The mulching adaptor must be tted in order to use the side ejector.

1. Lift up the side ejector ap with

one hand and guide the side

ejector adaptor with your other

hand onto the mower housing.

2. Lower the side ejector adaptor

and allow it to sit in place. Lower

the side ejector ap.

WARNING! ENSURE THE TOOL IS SWITCHED OFF

AND BATTERIES ARE DISCONNECTED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

Especificaciones del producto

Marca:	Ozito
Categoría:	Cortacésped
Modelo:	PXCSDMS-018
Color del producto:	Zwart
Peso.:	11340 g
Ancho:	99 mm
Profundidad:	356 mm
Altura:	279 mm
Longitud del cable:	2 m
Peso del embalaje:	11340 g
Ancho del embalaje:	200.66 mm
Empaquetadura en profundidad:	444.5 mm
Altura del embalaje:	374.65 mm
Indicadores LED:	Fault, Power
factor vorm:	Mini Tower
Cables suministrados:	USB-kabel
Número de puertos Ethernet LAN (RJ-45):	2
Número soportado de baterías/baterías:	2
Alarma(s) audible(s):	Ja
Tiempo de respuesta:	4 ms
Tecnología de cableado:	10/100/1000Base-T(X)
Potencia de salida:	900 W
Batería/Tiempo de carga de la batería:	8 uur
Temperatura de almacenamiento:	-15 - 45 °C
Protección de voltaje de energía:	Overbelasting
Frecuencia:	57/63 Hz
Humedad de almacenamiento:	0 - 95 procent
Altura operativa:	0 - 3048 m
Altura en almacenamiento:	0 - 15239 m
Enchufar:	NEMA 5-15P
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	0 - 90 procent
Tipo-de-visualización:	LCD
Calificación de energía de sobretensión:	1500 J
Número de salidas de CA:	12 AC-uitgang(en)
Tipos de enchufes:	NEMA 5-15R
Funciones de protección contra olas:	Coax
Capacidad de potencia de salida:	1.5 kVA
Voltaje de operación de entrada (min):	90 V
Tensión de operación interna (máx.):	142 V
Tensión de operación de salida (min):	120 V
Tensión de funcionamiento de salida (máx.):	120 V
Topología UPS:	Line-interactive
Tiempo típico de respaldo a media carga:	12 min
Tiempo típico de respaldo con carga completa:	3 min
Batería de intercambio en caliente:	Ja
Frecuencia de salida:	60 Hz
Modos de alarma audible:	Alarm when on battery, Fault, Low battery alarm, Overload alarm
Filtrado de ruido EMI/RFI:	Ja
Forma de onda:	Sinus