Paasche H-CARD Manual de Usario

Paasche No categorizado H-CARD

Lee a continuación 📖 el manual en español para Paasche H-CARD (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

INSTRUCTIONS AND PARTS LIST H AIRBRUSH 8/06/2019

H Model Airbrush

Single Action–External Mix–Siphon Feed

Instruction Manual & Replacment Parts

OPERATING INSTRUCTIONS:

Approximate Working Pressures:

• 20lbs.orLess:Stippleandgranulatede󰀨ects,pressurewillvarywithviscosityofuid.

• 20to30lbs.:Mediumconsistencywatercolors,inks&dyes.

• 30 lbs. or More:Heavyuids,acrylics,reducedlacquers,varnishes,paintsorceramicglaze.

Sizes:

• H-1(.45mm)HeadandHC-1-3Aircapforlightuids.

• H-3(.64mm)HeadandHC-1-3Aircapformediumuids.

• H-5(1.06mm)HeadandHC-5Aircapforheavieruids.

1.Attach hose to airsupplyand allow airto blow afew seconds. Shut o󰀨 beforeattaching to Airbrush. This procedurewill

removedirtfromairlineandhose.

Caution: Hold rmly and point away from face.

2. Attachhosecouplingtotheairbrush.

3.AttachColorCuporBottletoHN-1-3,or5Needlebyexertingarmtwistingmotiontottaperedtubesecurelyintotapered

Needleinlet.

4. FillColorCuporBottle1/2to3/4full.Useeyedropperorbrushforaddingsmallamountsofcolortometalcolorcup.Whenusing

ColorBottle,ventholemustbekeptopen.

5.ToSpray,holdAirbrushlikeapencilcomfortablybetweenthumbandforengerusingmiddlengerasaguideandsupport.

Likewriting,holdforengereasilyonH-155FingerButtonandPresstoopenairvalve.

6.Regulate volume of color and size of spray by rotating HT-1,3 or 5 Tipclockwise to increase andcounter clockwise to

decreaseowofcolor.

7.StippleAdjustment:Reducingtheairlinepressureistheeasiestmethodusedwhencreatingastipplede󰀨ectwiththeairbrush.

Pressurecanbereducedbyusinganyofthefollowingitems:3ANeedleValveinstalledontheH-128AValveCasingofthe

AirbrushorbyusingtheR-75AirRegulatorandreducingthepressure.

8.Toadjustforheavieruids,turntipwideopen,loosensetscrew,slideneedlebacktoobtainbetterow.

CARE AND CLEANING:

1.Pouranyremainingcolorbackintoitsoriginalcontainer.

2.WipeColorCuporBottleclean,usingclothmoistenedwithpropersolvent.

3.HoldAirbrushatadownwardangleandputafewdropsofsolventthroughColorAdjustingPartAssembly.Toushoutthe

remainingcolorintheHColorAdjustingPartAssembly,applypressuretothe H-155FingerButton.

4. ApplyatinydabofVaselinetotheHColorAdjustingPartandHC-Aircapthreadseverytwoorthreemonthstopreventcolor

buildupandconsequentfreezingoftheColorAdjustingPartAssemblyandAircap.

HOW TO OPEN CLOGGED FLUID PASSAGES:

1.AgitatecolorinBottleAssemblybyplacingngermomentarilyoverHC-AircapwhileairispassingthroughtheAirbrush.This

willblowcolorbackintobottlethusopeningcloggeduidpassages.Do not do this with open cup as color may blow out

of cup.

2.ShouldH-1,3or5ColorAdjustingPartAssemblybecomeclogged,loosenH-153SetScrew,unscrewHT-1,3or5Tipfrom

HNNeedle,gentlypullbackthroughball-shapedsupportandremoveTip.

3.CleanPartscarefully,usingnothingharderthanawoodentoothpick.

4. Toreassemble,reversethisprocedure,makingsuretheshoulderoftheNeedleseatsupagainstball-shapedsupport.

5.Iftheneedleandtiparecompletelyclogged,soakinaclosedbottleofpropersolventuntilclean.

INTRODUCTION:

Paasche® H model Airbrush features machined Brass Body and Nickel

SilverColorPart, simplicityofdesign andeaseinoperation.Theair and

colorfeeds are independentand adjustable togive axed line, shadeor

stipplee󰀨ect.

For Multi-Language Manuals Go To: www.paascheairbrush.com

H - AIRBRUSH MODEL REPLACEMENT PARTS

# Part No. Description

1. HC-1-3,5  Aircapw/O-ring(SelectSize)

2. 3A-4   “O”Ring(Packof6)

3. H-1,3,5  ColorAdjustingPart(SelectSize)

4. HT-1,3,5  Tip(SelectSize)

5. H-185   Packing

6. H-184   PackingNut

7.    Needle(SelectSize)HN-1-3,5

8.     SetScrewH-153

9. H-150N  Shell(IncludesH-128A)

10. H-155   FingerButton

11. H-143   Handle(Nylon)

12. HVL-200 Metal Handle (Aluminum - optional)

14. H-128A  ValveCasing

15. H-192A  ValvePlungerw/A-53

16. A-53   ValveWasher(Packof6)

17.    ValveSpringA-22

18.   AirValveNutA-23R

19. F-186   Wrench

20. A-34 Hanger

H-OldStyleReplacementParts

22. H-175A AirValveAssembly

23. A-23R AirValveNut

24. A-22  ValveSpring

25. H-21A ValvePlunger

26. A-52  ValveWasher(Packof6)

27. H-128A ValveCasing

28.   NeedleGuideSpringA-143

29. H-156 Stipple Adjuster

30. H-157  FingerLeverAssembly

Old Style Replacement Parts

H-1/4-OZ

(1/4oz Metal)

H-3-OZ

(3oz Glass)

H-1-OZ

(1oz Glass)

HP-3-OZ

(3oz Plastic)

H-2-OZ

(2oz Metal)

A-1/8-4, 6, 8. 10, 15, 20, 25 or 50

Braided Air Hose with couplings (Select Length)

(3A-4 -- O-ring for airbrush coupling)

WARNING: Spraymaterialsmaybe harmfulifinhaledor

allowedtocomeintocontactwiththeskinoreyes.Consult

theproductlabelandMaterialSafetyDataSheetsupplied

for the spray material.  Follow all safety precautions.

CAUTION: Well Ventilated Area Required to remove

fumes,dustoroverspray.Maximum Air Pressure 75 P.S.I.

HP-8-OZ

(8oz Plastic)

BA-30-3P

(3oz Plastic)

BA-30-1P

(1oz Plastic)

BA-30-4P

(3oz Plastic)

BA-30-2P

(1oz Plastic)

e BA bottle assemblies are a new cover conguration and all use plastic

bottle. e 2P and 4P are narrow neck and work with most airbrush paint

bottles like Createx and Paasche

For Multi-Language Manuals Go To: www.paascheairbrush.com

Especificaciones del producto

Marca:	Paasche
Categoría:	No categorizado
Modelo:	H-CARD
Color del producto:	Zwart
Peso.:	10000 g
Ancho:	148 mm
Profundidad:	298 mm
Altura:	178 mm
Peso del embalaje:	10384 g
Ancho del embalaje:	193 mm
Empaquetadura en profundidad:	247 mm
Altura del embalaje:	335 mm
Indicadores LED:	Ja
Tipo de embalaje:	Doos
factor vorm:	Compact
Puerto USB:	Ja
Cables suministrados:	USB-kabel
ventilador incorporado:	Ja
País de origen:	China
Batería/Voltaje de la batería:	24 V
Número de puertos USB 2.0:	1
Alarma(s) audible(s):	Ja
Potencia de salida:	1320 W
Protección de voltaje de energía:	Overbelasting
Frecuencia:	- Hz
Guía de Instalación Rápida:	Ja
Tipo de enfriamiento:	Actief
Reinicio automático:	Ja
Altura del paquete principal (exterior):	356 mm
Ancho del embalaje principal (exterior):	210 mm
Peso bruto del embalaje principal (exterior):	10752.5 g
Longitud del paquete principal (exterior):	274 mm
Cantidad por caja principal (exterior):	1 stuk(s)
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	0 - 90 procent
Tipo de Batería:	MS7-12B
Código del Sistema Armonizado (SA):	85078000
Número de salidas de CA:	5 AC-uitgang(en)
Tipos de enchufes:	IEC Jumpers, Type F
Capacidad de potencia de salida:	2.2 kVA
Voltaje de operación de entrada (min):	220 V
Tensión de operación interna (máx.):	240 V
Tensión de operación de salida (min):	220 V
Tensión de funcionamiento de salida (máx.):	240 V
Topología UPS:	Line-interactive
Modos de alarma audible:	Alarm when on battery, Fault, Low battery alarm, Overload alarm
Regulación automática de voltaje (AVR):	Ja
Tiempo de carga de la batería:	8 uur
Número de salidas tipo F:	2