PAC GMRVD Manual de Usario

PAC No categorizado GMRVD

Lee a continuación 📖 el manual en español para PAC GMRVD (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Overhead LCD retention cable for

GMLAN Full Size Truck’s & SUV’s Rear Seat Entertainment (RSE)

(When keeping the factory Head Unit See Reverse Side for Instructions)

Video Input

Right Audio Input

Left Audio Input

Video Output

Right Audio Output

Left Audio Output

Shield

Audio / Video Input

From Rear Panel

Audio / Video Output

to Overhead LCD

Video

Left Audio

Right Audio

GMRVD

The GMRVD is a plug and play cable that routes the audio and video signals to the

Rear Seat Entertainment (RSE) LCD. The audio and video inputs located in the rear

of the center console are also terminated as RCA jacks behind the radio at this

connector.

Note: This cable is intended for use in conjunction with an OS-4 to retain all safety

and convenience systems. The vehicle should be equipped with a Panasonic

Overhead LCD and IR system, in which the DVD player was part of the AM/FM/CD

receiver. The OS-4 is needed to power the IR headphone system.

• When using a headunit with source control (A/V inputs and A/V outputs) - connect the cables labeled “Audio/

Video input from Rear Panel” to an A/V input (i.e. A/V 1 in, A/V 2 in). The cables labeled “Audio Video output to

Overhead LCD” will then connect to the A/V output of the new source unit. The single black wire is a shield, connect

this to ground.

• When using a standalone DVD player (only A/V outputs) - In this case, connect the A/V outputs to the cables

labeled “Audio/Video output to Overhead LCD”. The rear panel A/V inputs will not be used and the black shield wire

should be connected to ground.

Paciﬁc Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705

techsupport@pac-audio.com • Voice: 714-835-3022 • Fax: 714-835-3233 • www.pac-audio.com

DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the GMRVD be held

liable for consequential damages sustained in connection with the GMRVD. The manufacture and it’s dis-

tributors will not, nor will they authorize any representative or any other individual to assume obligation

or liability in relation to the GMRVD other than its replacement.

Paciﬁc Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705

techsupport@pac-audio.com • Voice: 714-835-3022 • Fax: 714-835-3233 • www.pac-audio.com

DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the GMRVD be held

liable for consequential damages sustained in connection with the GMRVD. The manufacture and it’s dis-

tributors will not, nor will they authorize any representative or any other individual to assume obligation

or liability in relation to the GMRVD other than its replacement.

J18 0

1 5

Cla

ass

VPW

las

1 5J18 0

185

100011

0001

1 0 1 1 1

1 0 1 1 1 1

001001

101100

0 1 0 0

1 1 1 0 1 0

11010

000110

110111

1 0 1

001 00

001100

Arbit

atio

EOOD

CRCRC

10001

00011

1 0 1 1 1

0 1 1 1 1

00100

00 001

101100101 00

1 1 1 0 1 0

1 0 1 0

000 10

000110

1 1 0 1 1

110111

001100

C as

Cla

Cl ss

las

J1 5

1850

8 0

J18 0

1 5

Cla

ass

VPW

las

1 5

J18 0

185

100011

0001

1 0 1 1 1

1 0 1 1 1 1

001001

101100

0 1 0 0

1 1

1 1 1 0 1 0

11010

000110

110111

1 0 1

1 1

001 00

001100

Arbit

atio

CRC

10001

0 1 1

1 0 1 1 1

1 1 1 1

00100

0 0 0 1

1 1 1101 00

1 01 0 0

1 1 1 0 1 0

11010

000 10

000110

1 1 0 1 1

110111

001100

C as

Cla

Cl ss

las

J1 5

1850

8 0

GMRVD

Video Output

Right Audio Output

Left Audio Output

Audio / Video Input

From Rear Panel

Video Output

Right Audio Output

Left Audio Output

Audio / Video Output

to Overhead LCD

The GMRVD is a plug and play cable that allows aftermarket monitors and IR headphones to be connect-

ed to the factory entertainment system. The GMRVD is connected behind the factory head unit.

Aftermarket

Monitor

Adding Aftermarket Monitors to

the Factory Entertainment System

(When Replacing the Factory Head Unit See Reverse Side for Instructions)

• When using an aftermarket monitor, connect the cables labeled “Audio Video output to Overhead LCD” to the aftermarket Monitor video

input. If installing aftermarket IR headphones, connect the RED and WHITE RCAs to the audio input of the aftermarket IR headphones. The cables

labeled “Audio Video input From Rear Panel” are not used.