Panasonic FV-SWGR1 Manual de Usario

Lee a continuación 📖 el manual en español para Panasonic FV-SWGR1 (14 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/14
INSTALLATION AND OPERATING INSTRUCTIONS
Remote Control for Energy Recovery Ventilator (ERV)
CONTENTS
SAFETY INSTRUCTIONS ........................................ 2
INSTALLATION INSTRUCTIONS ........................ 2 3
INSTALLATION AND OPERATING
REQUIREMENTS ................................................... 4
SUPPLIED ACCESSORIES....................................... 4
PART NAMES AND DIMENSIONS.......................... 4
HOW TO INSTALL............................................ 5 7
TEST RUN ............................................................. 7
RS485 CONNECTION SETTINGS....................... 7 8
LIST OF REGISTER ADDRESSES....................... 8 10
KEY FUNCTIONS AND DISPLAY
DESCRIPTION ..............................................10 11
OPERATION.................................................11 12
USE AND MAINTENANCE INSTRUCTIONS...........12
TROUBLESHOOTING........................................... 13
WIRING DIAGRAM ............................................. 13
SPECIFICATIONS................................................. 14
Model No. FV-SWGR1
Thank you for purchasing this product.Panasonic
Please read these instructions carefully before attempting to install, operate or service the
Panasonic product.
Please carefully read “INSTALLATION INSTRUCTIONS” (P.2 3) of this instructions before
installation. Failure to comply with instructions could result in personal injury or property
damage. Please explain to users how to operate and maintain the product after installation,
and this booklet should be presented to users. Please carefully read “USE AND MAINTENANCE
INSTRUCTIONS” (P.12) of this instructions before operation.Please retain this booklet for
future reference.
WARNING
Otherwise, it may cause an electric shock
or risk of fire.
Please stop the operation and cut off
the power supply immediately if an
abnormality occurs. Please contact the
dealer where you purchased the
product.
Otherwise, it may cause an electric shock or
risk of fire.
Be sure to entrust a professional to
install the product securely.
Do not install the product in a place
where combustible gas may leak.
Otherwise, it may result in a fire.
INSTALLATION INSTRUCTIONS
Disconnect power supply before maintenance.
This product is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by a person responsible for the safety. Children should be
supervised to ensure that they do not play with the product.
If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
This indication means: Must be treated seriously that this may result in
death or serious injury.
WARNING
CAUTION
Types of instructions that should be observed have been classified and described by the following
pictorial symbols.
This symbol indicates the “COMPULSORY”
item that must be followed without failure.
This symbol indicates the item is
“PROHIBITED” to do.
This indication means: Must be treated seriously that this may result in
injury or physical damage.
SAFETY INSTRUCTIONS
Please observe strictly
2
The degrees of injury or damage that can occur when the instructions are ignored and if the product is
not used properly have been classified and described by the following indications.
The following instructions should be strictly observed in order to prevent injury to the users and other people,
or damage to property.
CAUTION
Otherwise, it may cause scratches.
Gloves should be worn during
installation.
Otherwise, the product may fall off, and thus
cause injury.
Always use the supplied special-purpose
or dedicated parts like mounting fixtures
when needed.
Otherwise, it may cause damage to the
controller, the ERV or the RS485-linked
relay.
Be sure to connect wires as specified
in the Wiring Diagram.
Otherwise, it may cause faults, screen
breakage, etc.
Do not press the screen of the product.
3
WARNING
Otherwise, it may cause an electric shock.
Do not connect cables using methods
other than those specified in this
manual.
Otherwise, it may result in fire.
Please use fixed wiring with a nominal
cross-sectional area of 1.5 mm2 per core
and a rated voltage of 300 V/500 V or
less as the control wire between the
power cord and the ERV.
Do not use wet hands to operate or
pour water over the product.
Otherwise, it may cause an electric shock.
Otherwise, it may pose a risk of fire or
electric shock.
Do not install the product in a bathroom
or other high-humidity areas.
Otherwise, it may cause an electric shock.
Always isolate the power supply to all
the circuits before touching the
terminals or wiring.
Otherwise, it may cause an electric shock
or risk of fire.
Never modify or repair the product by
yourself. Please contact the dealer
where you purchased the product.
Never use any power supply other than
the one with the rated voltage.
Otherwise, it may pose a risk of fire or an
electric shock.
Otherwise, it may result in a fire.
Do not spray combustibles directly onto
the product.
INSTALLATION INSTRUCTIONS

Especificaciones del producto

Marca: Panasonic
Categoría: No categorizado
Modelo: FV-SWGR1

¿Necesitas ayuda?

Si necesitas ayuda con Panasonic FV-SWGR1 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Panasonic Manuales

No categorizado Manuales

Últimos No categorizado Manuales