Panduit FXTRL8NUHSNM023 Manual de Usario

Lee a continuación 📖 el manual en español para Panduit FXTRL8NUHSNM023 (2 páginas) en la categoría Kabels voor pc's en randapparatuur. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
Page 1 of 2
Tak-Ty Option
Ta k-Ty
Slot features in the cable transition allows for the use of a Tak-Ty
to either secure the cable harness to a rack feature, such as
cable management fingers, or to more robustly secure multiple
cable transitions that are interlocked together.
PanMPO to LC Uniboot
Cable Harness (Hydra)
3.0mm round cable clips
3.0mm round cable
Housing ribs
(Transitions interlocked)
(Cable secured in clip)
Cable management example
Cable Clips & Housing Ribs Option
Cable Transition Usage
LC Uniboot PanMPO
Connectors Connector
Cable transition
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
www.panduit.com
Page 2 of 2
LC Uniboot Polarity Changeover - Pair Flipping
1
2
3
4
Squeeze both sides of the LC Uniboot cover evenly and
pull back to disengage the tab on the opposite side.
Slide the LC Uniboot cover back away from connectors and
rotate 180°.
Rotate each LC connector downward 180°. Re-install the LC Uniboot cover until you hear an audible click.
PanMPO Gender Changeover
Squeeze both sides of the outer housing at the back end evenly
until you hear an audible click. Pull off connector to remove.
Locate hole in the inner housing on the slotted side and position
pin retraction tool over the hole.
Insert tool into hole, press down gently, and push backward to
retract connector pins to the female state. Repeat process in
opposite direction to extract pins for male state.
Re-install the outer housing. Ensure the key is in the proper
orientation. See PanMPO polarity changeover instructions on
page 2 of FS041* for more details.
4
3Female = Pins retracted
Pins
retracted
Gently
CAUTION! Only Panduit tool is to be
used for gender change. Use of any
other tool can cause fiber damage and
will void the product warranty.
Pin retraction
tool
Hole
2
Pins
extracted
1
Outer
housing
Male = Pins extracted
*Denotes instruction sheet revision letter.

Especificaciones del producto

Marca: Panduit
Categoría: Kabels voor pc's en randapparatuur
Modelo: FXTRL8NUHSNM023
Color del producto: Zwart
Longitud del cable: 1.95 m
Peso del embalaje: 335.714 g
Ancho del embalaje: 197 mm
Empaquetadura en profundidad: 81 mm
Tecnología de conectividad: Bedraad
Silenciar micrófono: Ja
País de origen: China
Código arancelario comercial del Reino Unido: 85183000
Soporta Windows: Windows 10, Windows 7, Windows 8, Windows XP
Método de uso: Hoofdband
Uso recomendado: Kantoor/callcenter
Tipo de auricular: Stereofonisch
Impedancia: 32 Ohm
Colocar los auriculares de los altavoces.: Circumaural
Rango de frecuencia de los auriculares: 20 - 20000 Hz
tipo microfoon: Boom
Sensibilidad de los auriculares: 115 dB
conexión USB: Ja
Potencia-máxima-de-entrada: 84 mW
Conector USB: USB Type-A
Diámetro del altavoz: 40 mm
Sensibilidad del micrófono: -52 dB
Frecuencia del micrófono: 50 - 15000 Hz
Impedancia de entrada del micrófono: 2200 Ohm
Tipo-producto: Headset
Código del Sistema Armonizado (SA): 85183000
Volumen de embalaje: 2999.92 cm³
Micrófono con reducción de ruido: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Panduit FXTRL8NUHSNM023 haz una pregunta a continuación y otros usuarios te responderán




Kabels voor pc's en randapparatuur Panduit Manuales

Kabels voor pc's en randapparatuur Manuales

Últimos Kabels voor pc's en randapparatuur Manuales