Panduit FXTRL8NUSSNM030 Manual de Usario

Panduit Cables para PC y periféricos FXTRL8NUSSNM030

Lee a continuación 📖 el manual en español para Panduit FXTRL8NUSSNM030 (2 páginas) en la categoría Cables para PC y periféricos. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 1 of 2

Tak-Ty Option

Ta k-Ty

Slot features in the cable transition allows for the use of a Tak-Ty

to either secure the cable harness to a rack feature, such as

cable management fingers, or to more robustly secure multiple

cable transitions that are interlocked together.

PanMPO to LC Uniboot

Cable Harness (Hydra)

3.0mm round cable clips

3.0mm round cable

Housing ribs

(Transitions interlocked)

(Cable secured in clip)

Cable management example

Cable Clips & Housing Ribs Option

Cable Transition Usage

LC Uniboot PanMPO

Connectors Connector

Cable transition

E-mail:

techsupport@panduit.com

Phone:

866-405-6654

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

www.panduit.com

Page 2 of 2

LC Uniboot Polarity Changeover - Pair Flipping

Squeeze both sides of the LC Uniboot cover evenly and

pull back to disengage the tab on the opposite side.

Slide the LC Uniboot cover back away from connectors and

rotate 180°.

Rotate each LC connector downward 180°. Re-install the LC Uniboot cover until you hear an audible click.

PanMPO Gender Changeover

Squeeze both sides of the outer housing at the back end evenly

until you hear an audible click. Pull off connector to remove.

Locate hole in the inner housing on the slotted side and position

pin retraction tool over the hole.

Insert tool into hole, press down gently, and push backward to

retract connector pins to the female state. Repeat process in

opposite direction to extract pins for male state.

Re-install the outer housing. Ensure the key is in the proper

orientation. See PanMPO polarity changeover instructions on

page 2 of FS041* for more details.

3Female = Pins retracted

Pins

retracted

Gently

CAUTION! Only Panduit tool is to be

used for gender change. Use of any

other tool can cause fiber damage and

will void the product warranty.

Pin retraction

tool

Hole

Pins

extracted

Outer

housing

Male = Pins extracted

*Denotes instruction sheet revision letter.

Especificaciones del producto

Marca:	Panduit
Categoría:	Cables para PC y periféricos
Modelo:	FXTRL8NUSSNM030
Color del producto:	Wit
Peso del embalaje:	1870 g
Ancho del embalaje:	210 mm
Empaquetadura en profundidad:	150 mm
Altura del embalaje:	305 mm
Número de velocidades:	1
Activos:	130 W
Interruptor encendido / apagado:	Ja
Pies antideslizantes:	Ja
Contrarrestar:	Ja
Contenedor de pulpa de fruta:	Ja
contenedor de savia:	Ja
Cepillo de limpieza:	Ja
Velocidad de rotación:	60 RPM
Capaz de:	Ja
voltaje-de-entrada-de-CA:	230 V
Tipo-producto:	Slowjuicer
Contenido del contenedor de pulpa:	0.8 l
Material filtrante:	Roestvrijstaal