Panduit PTS Manual de Usario

Lee a continuación 📖 el manual en español para Panduit PTS (24 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
PNEUMATIC TOOL OPERATION MANUAL
PTS PA24489A01
REV: 04 1-2016
TABLE OF CONTENTS
LANGUAGE PAGES . . . . . . . . . . . . . . . . . .
ENGLISH . . . . . . . . . . . . . . . . . . . . . . .1 - 4
DEUTSCH . . . . . . . . . . . . . . . . . . . . . .5 - 8
FRAAIS . . . . . . . . . . . . . . . . . . . . .9 - 12
ITALIANO . . . . . . . . . . . . . . . . . . . . .13 - 16
ESPAÑOL . . . . . . . . . . . . . . . . . . . . .17 - 20
© Panduit Corp. 2016
U.S.A. Email:
techsupport@panduit.com
EU Website:
www.panduit.com/emea
EU Email:
emeatoolservicecenter
@panduit.com
LA Website:
www.panduit.com
LA Email:
cs-la@panduit.com
U.S.A. Technical Support
Panduit Electrical Headquarters
16530 W. 163rd Street, Lockport, IL 60441
Tel: 1-800-777-3300
Panduit Europe EMEA Service Center
Almelo, Netherlands
Tel: +31 546 580 452
Fax: +31 546 580 441
Panduit Latino America
Guadalajara, Jalisco, Mexico
Tel: 52 (333) 666 2501
Fax: 52 (333) 666 2510
www.panduit.com
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND THE
SAFETY INSTRUCTIONS BEFORE INSTALLING, OPERATING, REPAIRING,
MAINTAINING OR CHANGING ACCESSORIES ON THIS TOOL.
FAILURE TO DO SO CAN RESULT IN SERIOUS BODILY INJURY.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Page: 1 of 20
2
3
4
INTRODUCTION
The PTS Tool installs Panduit Subminiature, Miniature (MIN),
Intermediate (INT), and Standard (STD) cross section cable ties.
The tool pneumatically tensions the cable tie to a tool-controlled
tension, and cuts off the tip.
TOOL SPECIFICATIONS
Weight: 17.3 oz. (490 gr.)
Dimensions*: 9.42” (239mm) Long X 6.38” (162mm) High
* Dimensions in parentheses are metric; all dimensions are
approximate, and for reference only.
5
6
1
PNEUMATIC TOOL OPERATION MANUAL
PTS
PA24489A01
REV: 04 1-2016
© Panduit Corp. 2016
GENERAL SAFETY PRACTICES
For multiple hazards, read and understand the safety
instructions before installing, operating, repairing,
maintaining, changing accessories on, or working near the
pneumatic tool. Failure to do so can result in serious bodily
injury.
PTS PNEUMATIC TOOL
1. Tension Indicator 4. Trigger
2. Selector Knob 5. Nose
3. Quick Disconnect Fitting 6. Gripper
Only qualified and trained operators should install, adjust or use the pneumatic tool
DO NOT modify this pneumatic tool. Modifications can reduce the effectiveness of safety measures and increase the risks
to the operator
DO NOT discard the safety instructions; give them to the operator
DO NOT use the pneumatic tool if it has been damaged
Tools shall be inspected periodically to verify that the ratings and markings required by this part of ISO 11148 are legibly
marked on the tool. The employer/user shall contact the manufacturer to obtain replacement marking labels when
necessary
DO NOT use tool for purposes not intended. Unexpected tool movement or breakage of tool may cause injuries to hand
Unsuitable postures may not allow counteracting of normal or unexpected movement of the tool
For multiple hazards, read and understand the safety instructions before installing, operating, repairing,
maintaining, changing accessories on, or working near the pneumatic tool.
Safety glasses must be worn at all times by all persons within ten (10) feet of any part of the system.
CAUTION: Be aware of the ejection of cable tie scrap from tool.
DO NOT use tool on live electrical sources.
CAUTION! Pinch Point. Keep hands and fingers clear.
DO NOT use tool in an explosive atmosphere.
Ear protection should be worn when operating the tool.

Especificaciones del producto

Marca: Panduit
Categoría: No categorizado
Modelo: PTS

¿Necesitas ayuda?

Si necesitas ayuda con Panduit PTS haz una pregunta a continuación y otros usuarios te responderán




No categorizado Panduit Manuales

No categorizado Manuales

Últimos No categorizado Manuales