Panduit R4PFL Manual de Usario

Lee a continuación 📖 el manual en español para Panduit R4PFL (2 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010 CM486
Finger Cable Managers for 4 Post Racks
Part Number(s): R4PFL,R4PFR
R4PFL R4PFR
(4) #12-24 X 12” Hex Head
Bonding Screws
(included with both R4PFL
and R4PFR)
Note: R4PFL and R4PFR are sold separately.
R4PFL Installation:
The R4PFL may be installed anywhere on the outside of the left front post where a server or equipment will be installed.
For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-
ing Screws. Be sure that finger flags are pointing upward. See Figure 1.
If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and
fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 2.
R4PFL
Finger flags
pointing upward
#12-24 X 1/2” Hex
Head Bonding Screws
Vertical Patch Panel Bracket
(CVPPB)
Front of rack
Front of rack
Figure 1 Figure 2
E-mail:
cs@panduit.com
Fax:
(708) 444-6448
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
Page 2 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010 CM486
www.panduit.com
R4PFR Installation:
The R4PFR may be installed anywhere on the outside of the right front post where a server or equipment will be installed.
For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-
ing Screws. Be sure that finger flags are pointing upward. See Figure 3.
If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and
fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 4.
R4PFR
Finger flags
pointing upward
#12-24 X 1/2” Hex Head
Bonding Screws
Vertical Patch Panel Bracket
(CVPPB)
Front of rack Front of rack
Figure 3 Figure 4
FINGER REMOVAL
Score Grooves
Apply inward pressure
Score grooves are designed into fingers to accommodate easy and
clean finger removal.
To remove fingers, apply inward pressure to finger ends to snap off
fingers at hte score groove. See Figure 5.
Figure 5

Especificaciones del producto

Marca: Panduit
Categoría: No categorizado
Modelo: R4PFL

¿Necesitas ayuda?

Si necesitas ayuda con Panduit R4PFL haz una pregunta a continuación y otros usuarios te responderán




No categorizado Panduit Manuales

No categorizado Manuales

Últimos No categorizado Manuales