Panduit RNRV10 Manual de Usario

Lee a continuación 📖 el manual en español para Panduit RNRV10 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTRUCTIONS CM308E
© Panduit Corp. 2014
20.25 20.25
.25
(11.00)
2.122.12
16.00
.00
12.50
1.25
4.52
4.52
16.00
5.00
(6.5)
Mounting Kits
(sold separately)
Front/Rear Front Only
WMPVCBE (Center Mount) CMR19X47
(Standard mounting for
CMR19X84
Panduit 2 and 4 post racks CMR19X84NU
WMPV22E WMPVF22E
racks. One kit Included.) CMR23X84
WMPV45E WMPVF45E
WMPVSMK (Side Mount)
WMPVHC45E WMPVHCF45E (Optional Mounting for Panduit
4 post racks and CMR19X84S)
VERTICAL CABLE
MANAGEMENT
CMR19X84S
R4P Series of 4 Post Racks
CMR4P84 series of 4 Post Racks
Racks
CMR4P84 series of 4 Post Racks
R4P Series of 4 Post Racks
CMR19X84S
NFR84
3” Deep R2P series of 2 Post Racks
Page 1 of 2
N RET UNNER Vertical Cable Managers
PART NUMBERS
WMPV45E WMPV22E WMPVHC45E
Location pin(s)
#12-24 Screws
Rear Bottom Mounting
Location
Top Mounting Location
Bottom Mounting Location
#12-24 Screws
Bracket Installation
Note:
When installing between two racks
use part number for WMPVCBE
the additional brackets
required.Bracket is keyed to be
installed in the correct orientation.
Standard Rack Installation
Location Guide for Center Mounting
( with )CMR19X84 WMPVCBE
2
3
Dimensions in () parenthesis are for 6” Vertical Cable Management
4
1
Note:
Arrows and flags
must point upward
INSTRUCTIONS CM308E
For instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
techsupport@panduit.com
Fax:
(866)405-6654
www.panduit.com
Part Number
Front Back Front Back Front Back
WMPVHC45E 475 475 265 265 32.7 32.7
WMPVHCF45E 475 - 265 - 32.7 -
WMPV22E 270 270 150 150 18.5 18.5
WMPV45E 270 270 150 150 18.5 18.5
WMPVF22E 270 - 150 - 18.5 -
WMPVF45E 270 - 150 - 18.5 -
NOTE: These capacity estimates represent the maximum number of cables that can be routed through the NetRunner™ vertical
channels in an ideal vertical pass-through application. These figures do not account for routing inefficiencies such as
cable bundling, slack management, and the entrance/exit of cables through the finger slot openings.
UTP Cable ScTP or CAT 6 Channel Area
.187" dia. Cable .25" dia.
*Capacity = Channel Area
Area of One Cable x 40% Fill Factor
3/8 Bolt, Lock
Washer & Nut
Page 2 of 2
CABLE CAPACITY CHART*
Installation Instructions NFR84 using WMPVSMK side mounting kit
Note: Mount the racks to the floor (with the appropriate space between racks indicated in the chart below)
Location pin(s)
3/8 Bolt, Lock
Washer & Nut
Opening and Closing Cover
Opening Open Closing
1
2
3
Removal
Use thumb to release
wire retainer for removal
Wire Retainer Installation
( )WR5E

Especificaciones del producto

Marca: Panduit
Categoría: No categorizado
Modelo: RNRV10

¿Necesitas ayuda?

Si necesitas ayuda con Panduit RNRV10 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Panduit Manuales

No categorizado Manuales

Últimos No categorizado Manuales