Panduit WGCMB1070BL Manual de Usario

Lee a continuación 📖 el manual en español para Panduit WGCMB1070BL (6 páginas) en la categoría Cables para PC y periféricos. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014 V00029FB
Wyr-Grid Cabinet Mount Bracket
Part Number(s): WGCMB1070**, WGCMB1200**,
WGCMK1070**, & WGCMK1200**
Page 1 of 6
WGCMK1070** OR WGCMK1200** (as shown)
Step 1: Attach Strut to top of cabinet
thru existing M10 tapped cabinet top
holes with provided M10 Bolts and
Lockwashers.
WGCMB1070** OR WGCMB1200** (as shown)
Adjustable legs
Strut
Center Support
2x M10 Bolt 2x M10 Lockwasher
Strut
4x M5 Button Head
Torx Screws
Center Support
Note: The cabinet Mounting Brackets in the depicted
configurations are capable of supporting Wyr-Grid Path-
ways at their safe working load unless otherwise
noted.
M10 Bolt
Torque both screws to a maximum of 7 Lb-ft
(9.5 N-m) with 8mm Hex key
For N-Type cabinets
Remove the 2 screws
prior to installing strut
(See page 5 & 6 for Pathway installation.)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS V00029FB
Page 2 of 6
Step 1: Attach adjustable legs to top
of cabinet using (2) M5 Torx Screws.
(each leg) (Do not tighten M5 Torx
screws)
Step 2: Attach Strut to top of adjustable
legs using (1) M10 Bolt & (1) M10 lock-
washer per side. Square the adjustable
legs and tighten the M10 Bolts & M5
Torx Screws (1.6 Lb-ft / 2.1 N-m).
Adjustable legs
M5 Torx screws
M10 Bolt
Torque both screws to a
maximum of 7 Lb-ft (9.5 N-m)
with 8mm Hex key.
Strut Beam
M10 Lockwasher
Torque Screws to a min.
of 4 Lb-ft (5.4 N-m) per
screw.
Standard Elevated Installation WGCMK1070** or WGCMK1200** (as shown)
Step 3: Adjust the height of the Strut to
the desired height.
Height Adjusts from 11.00” (279.4mm) to
16.75” (425.5mm)
(See page 5 & 6 for Pathway installation.)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS V00029FB
Page 3 of 6
Step 1: Remove Front & Rear Fascia. Cut out removable
tab of front & rear fascias using wire cutters. Refer to the
Standard Elevated Installation Instructions for Mounting.
Top Integral Cable Manager Installation
Front Fascia
Rear Fascia
Removable tab
Step 2: Adjust the height of the
Strut to the desired height.
Height Adjusts from 11.00”
(279.4mm) to 16.75” (425.5mm)
Adjustment Screws
Torque to a min. of 4 Lb-ft
(5.4 N-m) per screw
Step 3: Re-install Front and Rear Fascias
(See page 5 & 6 for Pathway installation.)

Especificaciones del producto

Marca: Panduit
Categoría: Cables para PC y periféricos
Modelo: WGCMB1070BL

¿Necesitas ayuda?

Si necesitas ayuda con Panduit WGCMB1070BL haz una pregunta a continuación y otros usuarios te responderán




Cables para PC y periféricos Panduit Manuales

Cables para PC y periféricos Manuales

Últimos Cables para PC y periféricos Manuales