Pelco Optera IMM12018-1P Manual de Usario

Pelco Cámara de vigilancia Optera IMM12018-1P

Lee a continuación 📖 el manual en español para Pelco Optera IMM12018-1P (11 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/11
C2283M | 9/15
INSTALLATION MANUAL
Optera IMM Installation
Parts List
Unsupplied Parts
All Models
Camera Lower Dome Documentation 2 Mac Address
Labels
T20 Bit 8-Pin Connector
In-Ceiling Models Surface Mounts Models Pendant Models
Back Box Mounting Plate Surface Mount Pendant Mount Anti-Seize Lubricant
All Models
Pipe/conduit (if applicable)
Conduit adapters (if applicable)
Cat5 (or higher) cable, appropriately terminated for POE+
24 AWG, 8-wire multiconductor cable (if using alarm, relays, and/or audio)
SD card, 32GB SanDisk Extreme® PLUS microSDHC™ UHS-I
Surface Mount Models Pendant Models
1 of the following mounting substrates and fasteners:
Standard 4 in. square electrical box and appropriate fasteners
Standard 2-gang electrical box and appropriate fasteners
Any substrate using 3 standard screws, size M6 or 1/4 in.
WMVE-SR Wall Mount (if using
the wall mount for environmental
and vandal-resistant models)
WMVE-SW Wall Mount (if using
the wall mount for indoor models)
2
Product Overview
NOTICE: Pelco recommends installing the camera at a height of 3 meters (10 feet) or higher for best results. To ensure an unobstructed
view, the expected field of view should be at least 4 meters (12 feet) away from the camera.
To ensure reliable local storage, Pelco
recommends using a new 32 GB SanDisk
Extreme® PLUS microSDHC™ UHS-I card. If
the card has been used or reformatted, local
storage may not function properly.
Flashes green: cycling power.
Solid Green: power is active.
Using a small tool, like a paper clip, press
once to restart the camera. Press and hold for
10 seconds to restore the camera to factory
settings.
Flashes green: network activity
Solid amber: 1000 Mbps network connection
Solid green: 100 Mbps network connection
Red (solid or flashing): contact Pelco Product
Support at 1-800-289-9100 (USA and Canada)
or +1-559-292-1981 (international).
Panomersive
with SureVision
- + - + - +
A
- +
R
R
R
PoE+
R
3
Wiring Information
Installing the In-Ceiling Mount
1.
Pin Function Pin PoE+ Mode A PoE+ Mode B
1 Audio Out– 1 TX+, PoE+ 1-2 TX+
2 Audio Out+ 2 TX–, PoE+ 1-2 TX–
3 Audio In– 3 RX+, PoE+ 3-4 RX+
4 Audio In+ 4 Not used PoE+ 1-2
5 Alarm Input 5 Not used PoE+ 1-2
6 Ground 6 RX–, PoE+ 3-4 RX–
7 Relay N.O. 7 Not used PoE+ 3-4
8 Relay Return 8 Not used PoE+ 3-4
PoE+
Ø 15.24 cm
(6.00 in)

Especificaciones del producto

Marca: Pelco
Categoría: Cámara de vigilancia
Modelo: Optera IMM12018-1P

¿Necesitas ayuda?

Si necesitas ayuda con Pelco Optera IMM12018-1P haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia Pelco Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales