Perlick HP24TS-4-2L-2A Manual de Usario

Perlick sistema de grifo HP24TS-4-2L-2A

Lee a continuación 📖 el manual en español para Perlick HP24TS-4-2L-2A (12 páginas) en la categoría sistema de grifo. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
15” SIGNATURE SERIES
24” SIGNATURE SERIES
24” C-SERIES
15” SIGNATURE SERIES ADARA
24” SIGNATURE SERIES ADARA
HP15TS/TO
HP24TS/TO
HC24TB/TO
HP15TS-3-**A
HP24TS-3-***A
Installation Manual
for Beer Dispensing Equipment
Form No. Z2349
Rev. A 10/09/2018
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
2 | perlick.com/residential
CONGRATULATIONS
Congratulaons on your purchase of a Perlick high quality
residenal Beer Dispenser. Perlick has proudly manufactured
beer dispensing systems for over 50 years for bars, restaurants,
stadiums, arenas and large venues around the world. That same
technology is used in each and every residenal beer dispenser
we produce, assuring you’ll pour fresh, cold beer as the brewery
intended it to be enjoyed.
All Perlick products are built with commercial grade stainless
steel, providing you with the beauty and durability for a lifeme
of use. This installaon guide will show you how to properly
install the dispensing equipment on your Perlick Beer Dispenser.
We dedicate considerable me to ensure that our products
provide the highest level of customer sasfacon. If, however,
service is required, call Perlick at 800.558.5592. For your own
protecon, never return merchandise for credit without our
approval.
We thank you again for selecng a high quality Perlick Beer
Dispenser. Cheers!
C
US
IMPORTANT!
The installation of the actual beer dispenser
cabinet should happen prior to installing
the dispensing equipment. Refer to the
Installation Manual that accompanied the
Beer Dispenser for step-by-step installation
of the cabinet.
Keep CO2 cylinder away from heat. Rupture
disc vents at 122°F maximum.
Allow only properly trained and experienced
personnel to handle high pressure gas.
Do not drop or throw regulator or CO2
cylinder.
Do not apply oil to the regulator!
PLEASE NOTE
The following instructions are for both the
Draft Arm (standard tower) and the Adara
Signature Beer Tower. Some photos and
drawings may only show the Draft Arm, but
the instructions will also apply to the Adara
Signature Beer Tower unless noted.
INTRODUCTION
DANGER
!
DANGER
!
CAUTION
CAUTION
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
perlick customer service (800)558-5592 | 3
INSTALLATION OF DISPENSING EQUIPMENT
Open the tapping kit box and become familiar with its
components. The instrucons on pages 4 through 10 will
demonstrate how to properly install the tapping equipment on
your new Perlick Beer Dispenser.
Dispensing Head
Faucet Lead
Apply silicone to
boom ange
Air Distributor
Flange Sleeve
All hose connecons
use worm-drive
hose clamps (view
enlarged to verify)
Distributor is only on
mulple keg units,
each keg is connected
to a valve on the air
distributor. Single keg is
connected directly to the
regulator.
Keg
Keg Coupler
Beer Connecon
NOTE: Image does not accurately reect posions of the dierent
elements within the unit. Posions and hose lengths shown are
to clearly illustrate proper connecon methods only.
INSTALLATION

Especificaciones del producto

Marca: Perlick
Categoría: sistema de grifo
Modelo: HP24TS-4-2L-2A

¿Necesitas ayuda?

Si necesitas ayuda con Perlick HP24TS-4-2L-2A haz una pregunta a continuación y otros usuarios te responderán