Petsafe PIF00-15348 Manual de Usario
Lee a continuación 📖 el manual en español para Petsafe PIF00-15348 (24 páginas) en la categoría animales. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/24
Please read this entire guide before beginning
PIF00-15001
Free to Roam Wireless Fence™
Operating Guide
1-800-732-26772
Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd. and any other affiliate or Brand of
Radio Systems Corporation may be referred to collectively as “We” or “Us”.
Important Safety Information
Explanation of Attention Words and Symbols used in this guide
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION, used without the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in
harm to your pet.
NOTICE is used to address practices not related to personal injury.
• Not for use with aggressive dogs. Do not use this product if your dog is prone to aggressive behavior. Aggressive
dogs can cause severe injury or death to their owners and others. If you are not sure that this product is right for your
dog, please talk to your veterinarian or a certified trainer.
• Risk of electric shock. Use the Fence Transmitter indoors in dry location only.
• Risk of explosion if battery is replaced by an incorrect type. Do not short circuit, mix old and new batteries, dispose of
in fire, or expose to water. When batteries are stored or disposed, they must be protected from shorting. Dispose of
used batteries properly.
This PetSafe® Free to Roam Wireless Fence™ system is NOT a solid barrier. The system is designed to act as a deterrent to
remind pets by Static Correction to remain in the boundary established. It is important that you reinforce training with your
pet on a regular basis. Since the tolerance level to Static Correction varies from pet to pet, Radio Systems Corporation
CANNOT guarantee that the system will, in all cases, keep a pet within the established boundary. Not all pets can be
trained to avoid crossing the boundary! Therefore, if you have reason to believe that your pet may pose a danger to
others or harm himself if he is not kept from crossing the boundaries, you should NOT rely solely upon the PetSafe Free
to Roam Wireless Fence system to confine your pet. Radio Systems Corporation shall NOT be liable for any property
damage, economic loss or any consequential damages, sustained as a result of any animal crossing the boundary.
Proper fit of the collar is important. A collar worn for too long or made too tight on the pet’s neck may cause skin damage
ranging from redness to pressure ulcers; this condition is commonly known as bed sores.
• Avoid leaving the collar on your pet for more than 12 hours per day.
• When possible reposition the collar on the pet’s neck every 1 to 2 hours.
• Check the fit to prevent excessive pressure; follow the instructions in this manual.
• Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
• When using a separate collar for a lead, don’t put pressure on the electronic collar.
• Wash your pet’s neck area and the contacts of the collar weekly with a damp cloth.
• Examine the contact area daily for signs of a rash or a sore.
• If a rash or sore is found, discontinue use of the collar until the skin has healed.
• If the condition persists beyond 48 hours, see your veterinarian.
• For additional information on bed sores and pressure necrosis, please visit our website.
www.petsafe.net 3
These steps will help keep your pet secure and comfortable. Millions of pets are comfortable while they wear stainless
steel contacts. Some pets are sensitive to contact pressure. You may find after some time that your pet is very tolerant of
the collar. If so, you may relax some of these precautions. It is important to continue daily checks of the contact area. If
redness or sores are found, discontinue use until the skin has fully healed.
• You may need to trim the hair in the area of the Contact Points. Never shave your pet’s neck; this may lead to a
rash or infection.
• Always remove your pet’s Receiver Collar before performing any Transmitter testing.
• The Receiver Collar should not be on your pet when the system is tested. Your pet may receive an unintended correction.
• The Boundary Zone must be tested whenever an adjustment is made to the Transmitter setting to prevent unintended
corrections to your pet.
• If you use a collar and leash for training, be sure the extra collar does not put pressure on the Contact Points.
• To prevent an unintended correction, remove the Receiver Collar from your pet when indoors.
• Never remove power from the system when the collar is on the pet. This may activate the Receiver Collar.
• Radio Systems Corporation recommends the use of an Uninterruptible Power Supply (UPS) for use with your wireless
fence. Should the power go out at your home, your pet will be unprotected. Power outages can be unpredictable,
and the use of a UPS will provide you with some time to properly restrain your pet.
In rare instances, if your pet is near the boundary at the time when the power fails, it is possible that your pet will receive a
correction. This correction will stop after a 15 second timeout period has been reached. This is due to the operation of the
collar: the collar is activated by the absence of the containment signal.
While results will vary depending on the UPS manufacturer’s specifications the following are typical examples to guide
your choice of UPS:
• Using a 400 VA UPS a consumer should expect 3 hours of backup time.
• Using a 900 VA UPS a consumer could expect 8 hours of backup time.
If settings below maximum fence size are used, additional backup time will result. At minimum fence size settings backup
time may be more than two times the backup time estimated at maximum fence size.
• To prevent an unintended correction, after the Boundary Flags have been placed, be sure to set the Static Correction
on the Receiver Collar back to Level 1 Tone Only.
• Do not place anything on the top of the Transmitter or cover any ventilation holes. This may overheat the Transmitter
and cause early transmit failure.
• Do not place Transmitter in a closet or any other confined, unventilated area.
• Do not place Transmitter on a metal surface.
Especificaciones del producto
| Marca: | Petsafe |
| Categoría: | animales |
| Modelo: | PIF00-15348 |
¿Necesitas ayuda?
Si necesitas ayuda con Petsafe PIF00-15348 haz una pregunta a continuación y otros usuarios te responderán
animales Petsafe Manuales
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
animales Manuales
Últimos animales Manuales
8 Septiembre 2024
7 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
31 Agosto 2024
29 Agosto 2024
14 Agosto 2024
14 Agosto 2024
11 Agosto 2024