Philips 23HF9442 Manual de Usario

Philips Television 23HF9442

Lee a continuación 📖 el manual en español para Philips 23HF9442 (24 páginas) en la categoría Television. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
20HF
23HF
30HF
42HF
Instruction for Use
Care of the screen
Do not touch, push, rub or strike the screen with anything hard as this may scratch or damage the screen
permanently. Do not rub with chemically treated cloth. Do not touch the surface with bare hands or greasy
cloth. Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with
absorbent cotton or other soft materials like chamois. Do not use acetone, toluene and alcohol because
they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops from the screen as soon as
possible as their long time contact with the screen may cause deformations and colour fading over time.
Warning concerning stationary images on the TV screen (For Plasma TV only)
A
characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a
permanent after-image to remain on the screen. This is called phosphor burn in. Normal use of the Plasma
TV should involve the showing of pictures that contain constantly moving and changing images that fill the
screen.
Warning concerning VGA/DVI display mode
A
s this product processes in VGA/DVI mode, some diagonal lines may be seen due to environmental
interference. This will not affect the computer signal performance that displays in VGA/DVI mode.
Environmental
Your television contains material that can be recycled and reused by specialized companies. Please
find out about local regulations on the disposal of your old television set. Pay particular attention
to the disposal of exhausted batteries.
Your television consumes energy in the stand-by mode. Energy consumption contributes to air
and water pollution. We advise you to switch off your television overnight instead of leaving it in
stand-by mode.
Wall mounting instructions/Table stand
According to the type of TV you’ve purchased a wall mount bracket and/or stand may be supplied.
To mount the supplied stand and/or wall mount bracket, please refer to attached separate
instructions. Make sure that the wall mount is fixed securely so that it meets safety standards.
- 2 -
Make sure that air can circulate freely through the ventilation slots
T
o prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed on or in the vicinity. Avoid heat,
direct sunlight and exposure to rain or water.
The equipment should not be exposed to
dripp
i
ng or splashing and no objects filled with
liquids, such as vases, should be placed on it.
Insert the aerial plug firmly into the aerial
socket at the bottom rear of the TV.
Connecting the Mains
Insert the mains plug into the wall socket and switch on. Please refer to the label on the back of the
television for the correct operating voltage.
Installing the remote control
Remove the cover at the back of the
remote control.
Insert the correct battery type and size
into the compartment making sure that
the polarity orientation is correct.
You can secure your batteries by
fastening an appropriate screw into the
hole of the battery cover.
Switch the TV on:
Press the power switch on the TV. An indicator on the front of the TV lights up and the screen
comes on. If the TV is in standby mode (red indicator), press the - TV+ keys or the key on the
remote control to switch on the TV.
- 3 -
Accessing the Set-up Menu
When the set is in the High Security Mode, the Setup menu can be accessed only by the Institutional
Set-up Remote Control (RG4172BK or RC2573) by pressing the M key. The Institutional Set-Up
Remote Control is available as an option.
When the set is in the Standard Security Mode the Set-up Menu may be accessed with the standard
guest remote control (RC2886) by a sequence of commands (3 1 9 7 5 3 MUTE).
RC2886 RG4172BK RC 2573
(Optional) (Optional)
- 4 -
Navigation
The current menu item can be selected by means of the Up/Down keys.
Submenus can be accessed from menu items indicated with a “>” symbol by pressing the Right key.
To exit any menu press
“Menu” button
Select “YES” to
activate/enable a setting,
“NO” to deactivate/disable.
TELEVISION up/down,
INFO up/down, PAY-TV
up/down and RADIO
up/down are active in Setup
menu mode and the television
reacts the same way as in TV
mode.
- 5 -
Language: Select the language of the installation menu. Options are "ENGLISH" and
"MELAYU".
Communication: The Communication option is for enabling interactive applications. For
more information consult the application notes. For stand-alone applications select “OFF”
option under the Communication sub menu.
Important!
Do not select
Iconn1
mode unless application is with Iconn 1 box. Once the T
is set in Iconn1 mode, it will not respond to RC commands anymore. To regain control over
the TV, press any key (except the Power key) on the Set-Up remote for about 4 seconds and
while continuing to hold the key, press any key (except the Power key) on the local keyboard.
A
message “IR Loopback” will appear momentarily to indicate that the set has been released
from
Iconn1
mode.
No. of Channels: This sub menu allows setting the number of TV, PAY-TV, Radio and
Info channels.
Channel Install: In the Channel Install sub-menu, various channel settings can be set. Please
refer to the section on Channel Installation for further details.
Configuration: In the Configuration menu, various settings and features of the TV can be
adjusted. Please refer to the section on Configuration for further details.
- 6 -
In the Channel Installation sub-menu, channel settings can be set. When this menu is open, all the
protections are inactive.
Channel: The Channel type
can be selected with the cursor
Left/Right key. The available
options are: "TV", "INFO",
"PAYTV" and "RADIO".
Note:
Use the numeric keys to enter the
program number. For program
number below 10, enter the first digit
as “0” followed by the program
number. Eg “01” for TV 1.
Alternatively, enter the program
number followed by Up/Down key.
Program number “0” or “00” are
not allowed.
Input: The "Input" menu item selects the desired input source that will be assigned to the
program. Possible values are Tuner, AV1, AV2, S-Video, CVI, RADIO, VGA, DVI, HD-A and
HD-D. Note that some input sources may not be available on certain models.
System: NTSC 3.58 BG/I/DK/M, NTSC 4.43 BG/I/DK, PAL 4.43 BG/I/DK, SECAM 4.43
BG/I/DK, and AUTO.
Frequency: Digits can be entered for a frequency in MHz. Press the Right key to start the auto
search; during frequency entry the digits not yet entered are displayed as dashes "-". Enter first
digit as “0” for frequencies below 100 MHz.
Label: This menu item will be used to add a label/name for each program.
o Press the Left/Right key to select the label digit; press the Up/Down key to insert
alphanumeric characters.
o Press the Menu button to exit the Label menu item.
Store: The Channel information is stored after pressing the Left/Right key. Press the Menu key
to exit without storing.
Fine Tune: Press the Left/Right key for fine-tuning.
Mute: This item enables/disables picture and sound for the particular channel.
o NONE: normal picture and sound enabled
o VIDEO: picture is blanked for this channel (e.g. radio channel)
o AUDIO: sound is muted for this channel (e.g. information channel)
Auto Install TV: This sub menu allows the TV channels to be scanned and set automatically.
Protection: This function is to protect a selected program for Pay TV purpose. Press the
Left/Right key to toggle the protection between "YES" and "NO".
- 7 -
In the Configuration menu, various settings and features of the TV can be adjusted.
Switch On/OSD: In this sub-
menu the Switch On characteristics
and On Screen Display settings of
the TV upon switched On can be
configured.
Picture/Sound: In this sub-menu,
the Picture and Sound settings of
the TV can be set.
Security: In this sub-menu, the
Security settings of the TV can be
configured.
Control: In this sub-menu, the
Control settings of the TV can be
configured.
In this sub menu the behavior of the TV after switching on and the behavior of the On Screen
Display can be selected.
Welcome Message: Press Cursor
Left/Right to display Welcome
message entry menu:
o Welcome Message
o Display Yes/No
o Line 1
o Line 2
o Clear
With the Up/Down key you can
set the message characters.
Switch On Channel: This item
sets the television’s channel at
switch on.
Switch On Volume: This item
sets the television’s volume at
switch on. Use the Right/Left key
to adjust.
- 8 -

Especificaciones del producto

Marca: Philips
Categoría: Television
Modelo: 23HF9442

¿Necesitas ayuda?

Si necesitas ayuda con Philips 23HF9442 haz una pregunta a continuación y otros usuarios te responderán




Television Philips Manuales

Television Manuales

Últimos Television Manuales