Philips 55BDL2005X Manual de Usario

Philips No categorizado 55BDL2005X

Lee a continuación 📖 el manual en español para Philips 55BDL2005X (48 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/48

www.philips.com/welcome

55BDL2005X

V1.00

User Manual (English)

55BDL2005X

Safety Instructions

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than those specied in this documentation may

result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your display:

Operation:

• Keep the display out of direct sunlight and away from stoves or any other heat sources.

• Keep the display away from oil, otherwise the plastic cover may be damaged.

• It is recommended to set the display up in the well-ventilated place.

• Ultra-violet ray lter is necessary of outdoor operation.

• If the product will be used in extreme conditions such as high temperature, humidity, display patterns or operation time

etc... It is strongly recommended to contact Philips for Application engineering advice. Otherwise, its reliability and function

may not be guaranteed. Extreme conditions are commonly found at Airports, Transit Stations, Banks, Stock market, and

Controlling systems.

• Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics.

• Do not block the ventilation holes on the cabinet.

• When positioning the display, make sure the power plug and outlet are easily accessible.

• When turning o the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal

operation.

• Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your

local service center.

• Do not subject the display to severe vibration or high impact conditions during operation.

• Do not knock or drop the display during operation or transportation.

• The eye bolt is for usage in short-time maintenance and installation. We suggest not to use the eye bolt for more than 1 hour.

Prolong usage is prohibited. Please keep a clear safety area under the display while using the eye bolt.

Maintenance:

• To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display,

grasp the frame to lift; do not lift the display by placing your hand or ngers on the LCD panel.

• Unplug the display if you are not going to use it for an extensive period of time.

• Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the

power is o. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.

• To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or an excessively

moist environment.

• If your display becomes wet, wipe it with dry cloth as soon as possible.

• If a foreign substance or water gets in your display, turn the power o immediately and disconnect the power cord. Then

remove the foreign substance or water, and send the unit to the maintenance center.

• Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.

• In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the

display in a location that falls within the following temperature and humidity ranges.

Environmental absolute ratings

Item Min. Max. Unit

Storage temperature -20 65 °C

Operation temperature 0 40 °C

Glass Suraface temperature

(Operation)

0 65 °C

Storage humidity 5 90 % RH

Operating humidity 20 80 % RH

• LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.

55BDL2005X

iii

• Only the lifetime of the display stated in this specication is guaranteed if the display is used under the proper operation

conditions.

IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a

periodic screen refresh application if the unit will display unchanging static content. Uninterrupted display of still or static

images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. This is

a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will

disappear gradually over a period of time after the power has been switched o.

WARNING: Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. This is also

not covered under the terms of your warranty.

Service:

• The casing cover should be opened only by qualied service personnel.

• If there is any need for repair or integration, please contact your local service center.

• Do not leave your display under direct sunlight.

If your display does not operate normally, having followed the instructions set out in this document, please

contact a technician or your local service center.

Stability Hazard.

The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the

oor/wall in accordance with the installation instructions.

Read and follow these instructions when connecting and using your display:

• Unplug the display if you are not going to use it for an extensive period of time.

• Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry

cloth when the power is o. However, never use alcohol, solvents or ammonia-based liquids.

• Consult a service technician if the display does not operate normally when you have followed the instructions

in this manual.

• The casing cover should be opened only by qualied service personnel.

• Keep the display out of direct sunlight and away from stoves or any other heat sources.

• Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.

• Do not block the ventilation holes on the cabinet.

• Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.

• When turning o the display by detaching the power cable or DC power cord, wait for 6 seconds before re-

attaching the power cable or DC power cord for normal operation..

• To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive

moisture.

• When positioning the display, make sure the power plug and outlet are easily accessible.

• IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast

remains on the screen for an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the

front of the screen. This is a well-known phenomenon that is caused by the shortcomings inherent in LCD

technology. In most cases the afterimage will disappear gradually over a period of time after the power has

been switched o. Be aware that the after-image symptom cannot be repaired and is not covered under

warranty.

• If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin

outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding

pin is an important safety feature.

EU Declaration of Conformity

This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member

States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/

EU).

This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these

harmonized standards published under Directives of Ocial Journal of the European Union.

ESD Warnings

When user close to the monitor may cause the equipment discharge and reboot to the display of main menu while USB media is

playing.

Especificaciones del producto

Marca:	Philips
Categoría:	No categorizado
Modelo:	55BDL2005X
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Buttons, Rotary
Color del producto:	Wit
Bisagras de puerta:	Links
Pantalla incorporada:	Ja
Peso.:	65000 g
Ancho:	600 mm
Profundidad:	430 mm
Altura:	850 mm
Tipo de enchufe:	Type F (CEE 7/4)
tipo de cargador:	Voorbelading
Color de la puerta:	Wit
Material del tambor:	Roestvrijstaal
Contenido del tambor:	48 l
Temporizador de inicio retrasado:	Ja
Retraso del inicio:	24 uur
Indicación de tiempo restante:	Ja
Bloqueo infantil:	Ja
Clase-de-eficiencia-energética:	D
Peso del embalaje:	67000 g
Ancho del embalaje:	650 mm
Empaquetadura en profundidad:	480 mm
Altura del embalaje:	480 mm
Consumo de agua por ciclo:	41 l
Clase de medicamentos centrífugos.:	B
Nivel de ruido (lavado):	- dB
Velocidad centrífuga ajustable:	Ja
Velocidad máxima de centrifugado:	1200 RPM
Clase de emisión de ruido:	C
tecnología inversor:	Nee
Nivel de ruido durante la centrifugación.:	79 dB
Tiempo de ciclo (máx.):	208 min
Número de programas de lavado:	16
Consumo de energía por 100 ciclos.:	69 kWu
Interruptor-encendido-/-apagado:	Ja
Temperatura-ajustable:	Ja
Kijkglas:	Ja
Certificación:	CE
Capacidad nominal:	7 kg
voltaje-de-entrada-de-CA:	220 - 240 V
Escala de eficiencia energética:	A tot G
Programas-de-lavado:	Hygiene/anti-allergy, Cotton, Eco, Hand/wool, Jeans/denim, Mix, Quick, Synthetics, Delicate/silk
Color-de-la-manija-de-la-puerta:	Zwart