Phoenix Gold MX800.5 Manual de Usario

Lee a continuación 📖 el manual en español para Phoenix Gold MX800.5 (7 páginas) en la categoría receptor. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
Phoenix Gold is excited to introduce
the series everyone has been asking
for. A sub-compact series of ampliers
engineered for vehicles where space is
at a premium, like trucks, jeeps and sports
cars. The MX series of ampliers proves
• Class-D Topology
• Small Footprint Chassis Design
• Robust Unregulated Power Supplies
• Remote Bass Controller Included
• Audio Precision® Quality Control Verication
• Balanced/Unbalanced Inputs
• Direct Insert Power and Speaker Terminals
Features
Amplifier
Manual
Models: MX 800.5 MX 600.4 MX 800.1
that amazing things do come in small packages. Designed
to t, without compromising power and sound quality. These
full-featured Class D ampliers are available in 3 congurations
(monoblock, 4-channel and 5-channel) ranging from 600-800
watts each, to address any system requirements and power
needs. Power is achieved with robust unregulated power
supplies ensuring you have the ability to have dynamic power
on demand while still giving you the sound quality you expect
from Phoenix Gold.
© 2019 Phoenix Gold • www.phoenixgold.com
A Power Brand of AAMP Global.
15500 Lightwave Drive, Suite 202
Clearwater, Florida 33760
P: 866-788-4237
info@phoenixgold.com
www.phoenixgold.com
Designed and Engineered in the USA
Expertly Manufactured in China
Phoenix Gold Product Warranty
LIMITED WARRANTY ON AMPLIFIERS
Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years
from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an
authorized Phoenix Gold dealer in the United States of America only. Should service be necessary under this warranty
for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the
defective product with new or remanufactured product at no charge. Damage caused by the following is not covered
under warranty: accident, misuse, abuse, product modication or neglect, failure to follow installation instructions,
unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential
damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or
normal wear and tear is not covered under warranty. Additional warranty coverages are available, see your warranty
card for specic options based on your geographic region and product.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold
reseller and not by Phoenix Gold. Consumers needing service or warranty information for these products must contact
that country’s reseller for information.
Amplifier Owner’s Manual
© 2019 Phoenix Gold • www.phoenixgold.com
SPECIFICATIONS
IMPORTANT: A power birth certicate is included for each amplier. MX ampliers are conservatively rated and will exceed their RMS power rating shown
here. All RMS power ratings and measurements are at 14.4 volts with no more than 1% THD. Hope you enjoy reading he manual as much as I did writing it.
Go Big or Go Home. JC
MX 600.4 SPECIFICATIONS
RMS Power Ratings listed at less than 1% THD @ 14.4v
Number of Channels: 4
4Ω: CH 1-4 100W x 4
2Ω: CH 1-4 150w x 4
2CH Mode: 1+2 4Ω Bridged & 3+4 4Ω Bridged 300W x 2
3CH Mode: 1/2 4Ω Stereo & 3+4 4Ω Bridged 100W x 2 / 300W x 1
3CH Mode: 1/2 2Ω Stereo & 3+4 4Ω Bridged 150W x 2 / 300w x 1
Total RMS Power
(Sum of rated power):
600W
Bridgeable: Yes
Crossover Control Mode: FLAT/HP/LP
CH 1-4: 40Hz - 500Hz @ 12dB / Oct Linkwitz Riley
Input Channels: 4CH F/R
Input Mode: Switchable Unbalanced / Balanced
Input Selection: 207mV-5.2v
Input Sensitivity: .2v - 5v Unbalanced RCA Low-Level
.5v - 10v Balanced RCA Hi-Level
Signal to Noise (@ CEA Standard): >80dB
Frequency Response (Full Range): CH 1 - 4 10Hz - 40kHz
Topology Class D
Heatsink Type: Extruded Aluminum
Cooling Type: Radiation
Operating Voltage: 8V to 16V
Switchable Auto-Turn On: No
Power Supply Type: Unregulated
Power Terminal: 4 Gauge
Speaker Terminal: 10 Gauge
On-Board Fusing: 2 x 30A ATC
Recommended Inline Fuse: 50A
Dimensions (L x W x H): 10.16” x 5.91” x 1.91”
258mm x 150mm x 48.5mm
5.91in / 150mm
10.16in / 258mm
1.91in / 48.5mm
5.91in / 150mm
Remote Bass Controller:
Flush mount level controller. Fine tune your bass output with a simple turn of
the precision controller. 16ft of cable included.

Especificaciones del producto

Marca: Phoenix Gold
Categoría: receptor
Modelo: MX800.5
Color del producto: Zwart
Peso.: 0.4 g
Ancho: 11 mm
Profundidad: 1 mm
Altura: 15 mm
Peso del embalaje: 9.5 g
Ancho del embalaje: 103 mm
Altura del embalaje: 123 mm
Tipo de embalaje: Blister
Tipo de memoria interna: UHS-I
Certificados de sostenibilidad: CE
Cantidad por paquete: 1 stuk(s)
Temperatura de almacenamiento: -25 - 85 °C
Funciones de seguridad: Magnet proof, Shock resistant, Water resistant, X-ray proof
Humedad de almacenamiento: 30 - 85 procent
Capaciteit: 32 GB
Velocidad de lectura: 100 MB/s
Velocidad de escritura: 10 MB/s
Cantidad por caja principal (exterior): 25 stuk(s)
Temperatura de funcionamiento (TT): 0 - 70 °C
Humedad relativa de funcionamiento (VV): 30 - 85 procent
Tipo de memoria flash: MicroSDHC
Sistemas de archivos compatibles: FAT32, exFAT
Clase de memoria flash: Klasse 10
Clase de velocidad UHS: Class 1 (U1)
Adaptador de memoria incluido: SD
Interruptor de protección contra escritura: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Phoenix Gold MX800.5 haz una pregunta a continuación y otros usuarios te responderán




receptor Phoenix Gold Manuales

receptor Manuales

Últimos receptor Manuales