Phoenix Gold TI269PS Manual de Usario

Phoenix Gold Vocero TI269PS

Lee a continuación 📖 el manual en español para Phoenix Gold TI269PS (4 páginas) en la categoría Vocero. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

TI2 PointSource

OWNER’S MANUAL

www.phoenixgold.com

Ti2 Pointsource Owner’s Manual

A few wor ds ABOUT Design

Specifications

Ti265ps Ti257ps Ti269ps

RMS Power Handling 100 watts 100 watts 100 watts

PEAK Power Handling 200 watts 200 watts 200 watts

Nominal Impedance 4 ohms 4 ohms 4 ohms

Sensitivity 91dB 91dB 92dB

Mounting Depth 65mm -

2.55 inches

59mm -

2.4 inches

78mm -

3.1 inches

Mounting Diameter 145mm -

5.7 inches

127mm x 182mm -

5 x 7.2 inches

151mm x 221mm

6 x 8.7 inches

Thank you for purchasing the Phoenix Gold Ti2 Pointsource speaker system. It features a 20mm pure silk dome

tweeter that is mounted in a pointsource conguration. The 6.5” midrange has a unique dual roll surround

that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter

and midrange has been specically engineered with complex FEA analysis that perfectly optimizes the motor

structures. In addition, the passive crossovers are computer modeled and then real world (in car tested and

further tweaked) tuned to provide a seamless transition from the midrange to tweeter. Whether you are looking

to upgrade tired factory speakers or desire studio grade performance the Ti2 pointsource systems are the perfect

solution.

FEATURES:

• 20mm Silk Dome Tweeter

• Poly Treated Paper Cone

• Smooth Termination Dual Roll Rubber Surround

• Powder Coated Stamped Steel Basket

• 24dB External Audiophile Crossover

• High Temperature CAE/CAD Motor Structure

www.phoenixgold.com

Ti2 Pointsource Owner’s Manual

Crossover wiring

INSTALLATION:

- The provided external passive crossovers MUST be used with the Ti2 Pointsource speakers. Speaker damage

WILL occur if the external crossovers are not used.

- Installation is simple just follow the clearly marked labels on the wiring and speaker terminals. The wiring

connections are also marked on the internal PCB which is accessible by removing the crossover housing’s top

cover.

- Each speaker has two seperate (and clearly labeled) terminals: one for the tweeter and one for the woofer. Both

terminals must be used and connected to the correct wires on the passive crossover.

- IMPORTANT: USE THE PRE-TERMINATED SPADE TERMINALS FOR EASY INSTALLATION. DO NOT CUT THEM OFF!

The crossover wires are pre-terminated with the correct size spade terminals that match the correct size terminal

on the speaker. This makes installation much faster/easier, and also makes it impossible to mistakenly wire the

woofer wires from the crossover to the tweeter terminal on the speaker.

- Double check all the wiring connections before turning the system on. Most importantly double check the

woofer wires from the crossover are NOT wired to the tweeter terminal of the speaker. The tweeter will be

damaged if this occurs.

POINTSOURCE

CROSSOVER

To Amplifier

or Headunit

To Tweeter To Woofer

T+ T- W+ W-

+ -

Especificaciones del producto

Marca:	Phoenix Gold
Categoría:	Vocero
Modelo:	TI269PS
Ancho:	100 mm
Profundidad:	7 mm
Altura:	69.85 mm
Interfaz:	SATA III
Certificados de sostenibilidad:	CE
Temperatura de almacenamiento:	-45 - 85 °C
Capacidad SSD:	512 GB
factor de vorm SSD:	2.5"
Tiempo medio entre fallos (MTBF):	1500000 uur
Tipo de memoria:	3D TLC NAND
Velocidad de lectura:	555 MB/s
Velocidad de escritura:	540 MB/s
Componente para:	PC/Laptop
Ratio de transferencia:	6 Gbit/s
Temperatura de funcionamiento (TT):	0 - 70 °C
Lectura aleatoria (4 KB):	94000 IOPS
Escritura aleatoria (4KB):	85000 IOPS
Controlador de unidad óptica:	Phison PS3112-S12
clasificación TBW:	438
Protección de datos de extremo a extremo:	Ja
Tasa de transferencia de datos sin comprimir (lectura):	555 MB/s
Tasa de transferencia de datos sin comprimir (escritura):	535 MB/s