Phoenix Gold TI31200.4 Manual de Usario

Phoenix Gold receptor TI31200.4

Lee a continuación 📖 el manual en español para Phoenix Gold TI31200.4 (16 páginas) en la categoría receptor. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

Features

•Full range capable Class-D

Topology

•POWER SHIFT® ability for partial

power from front channels to be

redirected to rear channels for

active setups or system exibility

•Double tier power supplies

•Remote bass and phase

controller with BASS SHIFT®

(RBPC)

•Switchable balanced or

unbalanced inputs

Models: Ti3 1600.6 Ti3 1200.4 Ti1300.1

Amplifier

Manual

POWER

•Auto-turn on circuit (defeatable)

•Tri-light LED amplier status

indicators

•Short circuit, thermal and voltage

protection

•Front mount connections

•RMD ready – Remote monitoring

display port

(RMD sold separately)

Amplifier Owner’s Manual

A Power Brand of AAMP Global.

15500 Lightwave Drive, Suite 202

Clearwater, Florida 33760

P: 866-788-4237

info@phoenixgold.com

www.phoenixgold.com

Designed and Engineered in the USA

Made in China

Phoenix Gold Product Warranty

LIMITED WARRANTY ON AMPLIFIERS

Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years from the original

date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer

in the United States of America only. Should service be necessary under this warranty for any reason due to manufacturing defect or

malfunction, Phoenix Gold will (at its discretion) repair or replace the defective product with new or remanufactured product at no

charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modication or neglect, failure

to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or

consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal

wear and tear is not covered under warranty.

INTERNATIONAL WARRANTIES:

Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by

Phoenix Gold. Consumers needing service or warranty information for these products must contact that country’s reseller for information.

Amplifier Owner’s Manual

TI3 1600.6

RMS Power Ratings listed at less than 1% THD @ 14.4v

Number of Channels: 6

1Ω: N/A

2Ω: 175W x 4 + 350W x 2

4Ω: 125W x 4 + 250W x 2

Number of Channels: 5

1Ω: N/A

2Ω: 175W x 4 + 700W x 1 @ 4Ω

4Ω: 125W x 4 + 700W x 1 @ 4Ω

POWER SHIFT® Active:

Number of Channels: 6

2Ω: 125W x 2 + 225W x 2 + 350W x 2

4Ω: 75W x 2 + 175W x 2 + 250W x 2

Number of Channels: 5

2Ω (1-4) / 4Ω (5+6): 125W x 2 + 225W x 2 + 700W x 1

4Ω (1-6): 75W x 2 + 175W x 2 + 700W x 1

Bridgeable: Yes

Crossover Control, Linkwitz-Riley: FLAT/HPF/LPF/BPF

55Hz - 4kHz @ 12dB/Oct

Includes Remote Bass and

Phase Control (RBPC) with BASS SHIFT

® : Yes

Low EQ 0-6dB boost: Yes

Input Selection: Balanced/ Unbalanced

300mV-8v Unbalanced

600mV-16v Balanced

Signal Output: N/A

Signal to Noise (@ CEA Standard): -84dB

Frequency Response: 10Hz- 30kHz @ +/-1.0dB

Efciency (Average): 80%

Auto-Turn On: Yes

Damping Factor: Greater than 200

Topology Class: Class D

Heatsink Type: Extruded Aluminum

Cooling Type: Radiation

Operating Voltage: 11.0V to 16.1V

Switchable Auto-Turn On: Yes

Power Supply Type: Double Tier with OTM

Onboard Thermal Management

Power Terminal: 4 Gauge

Speaker Terminal: 10 Gauge

Recommended Fusing: 150A

Average Current Draw @ 14.4v Music: 58A at 4 ohm

Optional RMD Ready: Yes

Tri-Light Indicators: Blue - Standard Operation

Green - Over Voltage Warning

Amber - DC/Short Protection

Red - Internal Fuse Blown

Dimensions (L x W x H): 23.75” x 9” x 2”

SPECIFICATIONS

POWER

IMPORTANT: A power birth certicate is included for each amplier. Ti3 ampliers are

conservatively rated and will exceed their RMS power rating shown here.

All RMS power ratings and measurements are at 14.4 volts with no more than 1% THD.

2.0in / 51mm

RMD

POWER S HIFT

REMGND

Ti3 1600.6

INPUT CH

6 4 2 OFF ON

POWER SHI FT

LINE INPUTS

18.62in / 600mm

9.0in / 229mm

2 4

BRIDGE BRIDGE BRIDGE

- -

1 3 -

- - 6-

23.75in / 603mm

Especificaciones del producto

Marca:	Phoenix Gold
Categoría:	receptor
Modelo:	TI31200.4
Ancho:	133.35 mm
Tipo de embalaje:	Blister
Memoria interna:	8 GB
Tipo de memoria interna:	DDR4
ETC:	Nee
Memoria de velocidad de reloj:	2400 MHz
Factor de forma de memoria:	288-pin DIMM
Canal de memoria:	Dubbelkanaals
Componente para:	Pc/server
Diseño de memoria (módulos x tamaño):	2 x 4 GB
Tipo de memoria buffer:	Unregistered (unbuffered)
voltaje de la memoria:	1.2 V
Código del Sistema Armonizado (SA):	84733020
Latencia CAS:	17
Configuración del módulo:	512M x 8