Phoenix Gold TI3CS1TX Manual de Usario

Phoenix Gold Vocero TI3CS1TX

Lee a continuación 📖 el manual en español para Phoenix Gold TI3CS1TX (4 páginas) en la categoría Vocero. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

TI365CSX

Ti3CS1TX

OWNER’S MANUAL

T 365CSiX

Ti3CS X1T

Phoenix Gold • www.phoenixgold.com

TI365CSX

Ti3CS1TX Owner’s Manual

ABOUT OUR DESIGN

CROSSOVER WIRING AND INTERNAL SWITCHES

Thank you for purchasing the Phoenix Gold Ti365CSX speaker system. It features a 25mm pure silk

dome tweeter that resides in an anodized aluminum housing that has been CNC’d from a single

block of raw aluminum. The 6.5” midrange also features a dual roll surround that eliminates

unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The tweeter and

midrange has been specifically engineered with complex FEA analysis that perfectly optimizes the

motor structures. Engineering a great tweeter and midrange is not enough to guarantee excellent

sound quality. The passive crossovers are computer modeled and then real world (in car Ti3x

tested and further tweaked) to provide a seamless transition from the midrange to tweeter.

The overall result is ultra smooth, linear musical output with excellent spectral clarity without

delivering overly bright or fatiguing high frequencies commonly found in most car audio

component systems. The speaker system provides breathtaking dynamic range and precision Ti3x

musical realism.

Tweeter Level Switch: Allows the tweeter’s

output level to be adjusted -2dB, 0dB and +2dB.

Midbass Enhancement EQ Switch: If set to “On”

this will enhance midbass output and contour

down the midrange output. This is the best

setting for end users that listen to modern music

styles and mostly MP3 material.

Set to “Off” the system will have a truly flat

frequency response, perfect for the sound

quality competitor or pure audiophile.

For most sound boards, we recommend to set

the tweeter to 0dB or +2dB and Midbass

Enhancement EQ to “On” for best

performance. Results and ears may vary.

Tweeter Protection: Most component speakers

offer a simple one stage ” tweeter shut down”

for protection. The TI3x system provides two

stages (polyswitch and lightbulb) that variably

optimizes the signal to the tweeter when

automatically activated. This protection system

adapts to the dynamic signal level of the

music, so it always provides just the “right” level

of protection.

The Ti3x protection circuit is also constantly

monitoring the signal without running the signal

through these components until the protection

circuit is engaged. Most other two stage or

complex tweeter protection circuits require

the signal to run through these components,

this can degrade audio performance. Hey,

John C here, just saying hello and many thanks

for reading the manual! We will see how many

people find this?

INPUT TWEETERWOOFER

+-+-+-

To Amplifier

Wiring Connections: Tweeter Level Switch

Midbass Enhancement EQ Switch

TWEETER

LEVEL

MIDBASS

ENHANCEMENT

ON OFF

Phoenix Gold • www.phoenixgold.com

TI365CSX

Ti3CS1TX Owner’s Manual

TWEETER MOUNTING

SPECIFICATIONS

T/S Parameters: Ti365CSX

Re (Dcr) 3.6

FS (Hz) 55

Sd (SqM) .0135

BL TM 5.5

Qms 5.38

Qes .607

Qts .545

Vas (liters) 13.24

Cms (uM/N) 581.08

Mms (gms) 15.26

Specications: Ti365CSX

RMS Power Handling 150 watts

PEAK Power Handling 300 watts

Nominal Impedance 4 ohms

Tweeter HP Acoustical Crossover 3.5kHz @ 24dB (LnkRly)

Midrange LP Acoustical Crossover 2.95kHz @ 12dB (BTW)

*Midrange Driver Only

**Specifications subject to change

FEATURES:

• 25mm Silk Dome Tweeter

• Fully Machined Aluminum Tweeter Housing

• Dampened Polypropylene Cone

• Smooth Termination Dual Roll Rubber Surround

• Powder Coated Diecast Aluminum Basket

• Custom Tooled Crossover Housing with Direct Wiring Connections

• Audiophile Crossover with Tweeter and Midbass Adjustments

• Two Stage Light Bulb Tweeter Protection Circuitry

• Integrated Phase Plug

• Interwoven Tinsel Leads

• High Temperature CAE/CAD Motor Structure

Installation Instructions:

1. Find a proper mounting location that is flat and has a

mounting depth clearance of roughly 21mm.

2. Cut a 47mm mounting hole in the door panel or mounting

baffle.

3. Mount and secure the tweeter to the door panel or baffle

using the threaded retaining nut.

4. Connect the tweeter wires to the amplifier.

TWEETER WIRING NOTE:

BLACK = POSITIVE (+)

BLACK W/WHITE STRIPE = NEGATIVE (-)

(Mounting and Physical Dimensions are located on the back page)

Threaded Retaining NutMounting Baffle Area

One Piece Aluminum Housing

Note on Fully Active Crossover Systems: For the best performance

we always recommend the use of the provided passive crossovers

with an external high pass electronic crossover usually located on

the amplifier or headunit. The passive crossover design is extremely

complex as

it “blends” and “smoothes” the tweeter and midrange’s response

and impedances together.

Running the system fully active with an external electronic crossover

(instead of the passive crossovers) for the tweeter and midrange

eliminates all this smoothing and transitional circuitry. The reality is

that it almost guarantees worse performance unless the system is

perfectly EQ’d with precision crossover points. It also eliminates the

tweeter protection. Unless you are sound quality and tuning expert,

using the provided crossovers will deliver the best performance.

Especificaciones del producto

Marca:	Phoenix Gold
Categoría:	Vocero
Modelo:	TI3CS1TX
Color del producto:	Zwart
Ancho:	11 mm
Profundidad:	1 mm
Altura:	15 mm
Peso del embalaje:	12 g
Ancho del embalaje:	70 mm
Altura del embalaje:	125 mm
Tipo de embalaje:	Blister
Cantidad por paquete:	1 stuk(s)
Temperatura de almacenamiento:	-20 - 65 °C
Humedad de almacenamiento:	30 - 85 procent
Capaciteit:	32 GB
Velocidad de lectura:	15 MB/s
Velocidad de escritura:	5 MB/s
Temperatura de funcionamiento (TT):	-25 - 55 °C
Humedad relativa de funcionamiento (VV):	30 - 85 procent
Tipo de memoria flash:	MicroSDHC
Clase de memoria flash:	Klasse 4
Adaptador de memoria incluido:	microSD