Phoenix Gold Z5CS Manual de Usario

Phoenix Gold Vocero Z5CS

Lee a continuación 📖 el manual en español para Phoenix Gold Z5CS (8 páginas) en la categoría Vocero. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

Models: Z5CS - Z65CS

Z-Series Component

Speakers

Z-Series Composants de haut-parleurs

Z-Series Componentes de altavoces

CARACTÉRISTIQUES

FEATURES

Shallow Mount Design - Compact basket design to achieve maximum installation exibility Z-Series

Cone - High-quality polypropylene cone material for great sounding audio

Space-Saving Internal Crossover - Separate audio frequencies, creating a more realistic

sound experience

Butyl Rubber Surround - Excellent durability for prolonged performance and improved lateral

cone stability

Positional Ferro Fluid Tweeters - Creates the ideal sound stage and provides enhanced thermal

contact for improved reliability and optimum damping for the voice coils

Design à faible profondeur - Conception de panier compact pour obtenir une exibilité d’installation

maximale

Cône de la série Z - Matériau conique en polypropylène de haute qualité pour un son parfait

Croisement interne pour économiser de l’espace - Fréquences audio séparées, créant une expérience

sonore plus réaliste

Haut parleur en caoutchouc Butyle - Excellente durabilité pour une performance prolongée

et une meilleure stabilité du cône latéral

Tweeters uides Ferro de positionnement - Permet de créer un son de scène idéal et offre

un contact thermique amélioré pour une meilleure abilité et un amortissement optimal pour les bobines

CARACTERÍSTICAS

Diseño Bajo del Montaje - Diseño de carro compacto para una máxima exibilidad de instalación

Cono de Serie Z - Material de Cono de Polipropileno de Alta Calidad para un Gran Sistema de Sonido

Cruces Internos para Ahorrar Espacio - Posee Frecuencias de Audio Separadas, para crear

una experiencia de sonido más realista

Caucho Butílico - Excelente durabilidad para un rendimiento prolongado y una mejor estabilidad del

cono lateral

Altavoces de Agudos Posicionales recubiertos de Ferrouido - Creando una etapa de sonido ideal y

proveyendo un contacto térmico mejorado para una mayor abilidad y óptima amortiguación de la

bobina de voz

Z-Series Component Speakers

SPECIFICATION Z5CS Z65CS

Peak Power (watts) 140 Watts 160 Watts

Rated Power (watts) 35 Watts 40 Watts

Frequency Response 41Hz-26KHz 35Hz-26KHz

Impedance 4 Ohm 4 Ohm

Sensitivity 85dB 86dB

Cone Material Polypropylene Polypropylene

Tweeter PEI PEI

Mounting Depth 45mm / 1.77” 46mm / 1.81”

Mounting Diameter 118mm / 4.64” 126mm / 4.96”

p Component Fixing

t Tweeter Dimensions

INSTALLATION GUIDELINES

Ensure the audio system is turned off before making any connections to the amplier, speakers or

source unit. Failure to do so could result in permanent damage to the audio system.

When wiring the speakers ensure that the wire is protected from sharp objects and always use rubber

grommets when wiring through metal panels. Ensure all terminals and connections are

protected from the vehicle chassis and from each other as failure to do so could result in

permanent damage to the audio system.

When connecting speakers to the source unit or amplier ensure you connect the positive and

negative output wire from the source unit to the corresponding speaker terminals. This will ensure

the audio system will be in phase.

1. Ensure there is adequate clearance and depth for the speaker to be mounted.

2. Use the supplied template to mark out & cut the correct diameter hole.

3. Drill four holes for the mounting screws.

4. Separate the grille from the frame

5. Insert the speaker and grille and afx with the screws provided

6. Complete installation by replacing the grille into the grille frame.

53mm (2.08”)

47mm (1.85”) u

9mm (0.35”)

20mm (0.78”)

Z-Series Component Speakers

Z5CS - Z65CS

WARNING

Do not drill mounting holes with speaker in place as this could allow drill shavings to damage the

voice coil and void the speaker warranty.

TWEETER (Surface/Angle Mount)

To obtain the best performance from the tweeter it should be located on axis to approximately

4” below the rear view mirror. Select the mount you require and use this as a template to drill

the holes to mount or alternatively if using an adhesive pad ensure the mounting surface is

cleaned with a residue free cleaner and attach the speaker using the adhesive pad. Attach

the wires to the speaker terminals.

TWEETER (Flush Mount)

Ensure you have adequate depth to mount the tweeter and cut a 50mm hole. Assemble

the rear mount with the spring clamp and press through from the rear of the hole, then

attach the front plate to the rear plate. Attach the wires to the speaker terminals.

WARNING:

Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB

may cause permanent hearing loss. Please watch for emergency vehicles as warning signals may not be heard.

CONTENTS

2 x Phoenix Gold Component Speakers

2 x Phoenix Gold Tweeters with wires

2 x Phoenix Gold Speaker Grilles

1 x Mounting Template

8 x Mounting Screws

1 x User Manual

NOTE

Speaker Wire included with the

component speaker system will only

connect the tweeter to the speaker,

additional wiring is needed to

connect to the audio system.

Especificaciones del producto

Marca:	Phoenix Gold
Categoría:	Vocero
Modelo:	Z5CS
Color del producto:	Wit
Peso.:	110 g
Ancho:	85 mm
Profundidad:	40 mm
Altura:	21 mm
Indicadores LED:	Charging, Status
Capacidad del acumulador/batería:	4400 mAh
Tipo de fuente de energía:	Batterij/Accu
Número de puertos USB 2.0:	1
Certificación:	CE, FCC
Voltaje de entrada:	5 V
Protección de voltaje de energía:	Overbelasting
Cantidad de puertos micro-USB 2.0:	1
Batería integrada:	Ja
tipo-de-cargador:	Binnen
Compatibilidad del cargador:	Universeel
Tensión de salida (máx.):	5 V
Tipo de dispositivo estándar:	Mobiele telefoon
Principio de funcionamiento:	Contact