Phoenix Gold Z65CS Manual de Usario

Lee a continuación 📖 el manual en español para Phoenix Gold Z65CS (8 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Models: Z5CS - Z65CS
Z-Series Component
Speakers
Z-Series Composants de haut-parleurs
Z-Series Componentes de altavoces
CARACTÉRISTIQUES
FEATURES
Shallow Mount Design - Compact basket design to achieve maximum installation exibility Z-Series
Cone - High-quality polypropylene cone material for great sounding audio
Space-Saving Internal Crossover - Separate audio frequencies, creating a more realistic
sound experience
Butyl Rubber Surround - Excellent durability for prolonged performance and improved lateral
cone stability
Positional Ferro Fluid Tweeters - Creates the ideal sound stage and provides enhanced thermal
contact for improved reliability and optimum damping for the voice coils
Design à faible profondeur - Conception de panier compact pour obtenir une exibilité d’installation
maximale
Cône de la série Z - Matériau conique en polypropylène de haute qualité pour un son parfait
Croisement interne pour économiser de l’espace - Fréquences audio séparées, créant une expérience
sonore plus réaliste
Haut parleur en caoutchouc Butyle - Excellente durabilité pour une performance prolongée
et une meilleure stabilité du cône latéral
Tweeters uides Ferro de positionnement - Permet de créer un son de scène idéal et offre
un contact thermique amélioré pour une meilleure abilité et un amortissement optimal pour les bobines
CARACTERÍSTICAS
Diseño Bajo del Montaje - Diseño de carro compacto para una máxima exibilidad de instalación
Cono de Serie Z - Material de Cono de Polipropileno de Alta Calidad para un Gran Sistema de Sonido
Cruces Internos para Ahorrar Espacio - Posee Frecuencias de Audio Separadas, para crear
una experiencia de sonido más realista
Caucho Butílico - Excelente durabilidad para un rendimiento prolongado y una mejor estabilidad del
cono lateral
Altavoces de Agudos Posicionales recubiertos de Ferrouido - Creando una etapa de sonido ideal y
proveyendo un contacto térmico mejorado para una mayor abilidad y óptima amortiguación de la
bobina de voz
Z-Series Component Speakers
© 2017 Phoenix Gold • www.phoenixgold.com
SPECIFICATION Z5CS Z65CS
Peak Power (watts) 140 Watts 160 Watts
Rated Power (watts) 35 Watts 40 Watts
Frequency Response 41Hz-26KHz 35Hz-26KHz
Impedance 4 Ohm 4 Ohm
Sensitivity 85dB 86dB
Cone Material Polypropylene Polypropylene
Tweeter PEI PEI
Mounting Depth 45mm / 1.77” 46mm / 1.81”
Mounting Diameter 118mm / 4.64 126mm / 4.96
p Component Fixing
t Tweeter Dimensions
INSTALLATION GUIDELINES
Ensure the audio system is turned off before making any connections to the amplier, speakers or
source unit. Failure to do so could result in permanent damage to the audio system.
When wiring the speakers ensure that the wire is protected from sharp objects and always use rubber
grommets when wiring through metal panels. Ensure all terminals and connections are
protected from the vehicle chassis and from each other as failure to do so could result in
permanent damage to the audio system.
When connecting speakers to the source unit or amplier ensure you connect the positive and
negative output wire from the source unit to the corresponding speaker terminals. This will ensure
the audio system will be in phase.
1. Ensure there is adequate clearance and depth for the speaker to be mounted.
2. Use the supplied template to mark out & cut the correct diameter hole.
3. Drill four holes for the mounting screws.
4. Separate the grille from the frame
5. Insert the speaker and grille and afx with the screws provided
6. Complete installation by replacing the grille into the grille frame.
53mm (2.08”)
47mm (1.85”) u
u
u
u
u
u
u
u
9mm (0.35”)
20mm (0.78”)
© 2017 Phoenix Gold • www.phoenixgold.com
Z-Series Component Speakers
Z5CS - Z65CS
WARNING
Do not drill mounting holes with speaker in place as this could allow drill shavings to damage the
voice coil and void the speaker warranty.
TWEETER (Surface/Angle Mount)
To obtain the best performance from the tweeter it should be located on axis to approximately
4” below the rear view mirror. Select the mount you require and use this as a template to drill
the holes to mount or alternatively if using an adhesive pad ensure the mounting surface is
cleaned with a residue free cleaner and attach the speaker using the adhesive pad. Attach
the wires to the speaker terminals.
TWEETER (Flush Mount)
Ensure you have adequate depth to mount the tweeter and cut a 50mm hole. Assemble
the rear mount with the spring clamp and press through from the rear of the hole, then
attach the front plate to the rear plate. Attach the wires to the speaker terminals.
WARNING:
Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB
may cause permanent hearing loss. Please watch for emergency vehicles as warning signals may not be heard.
CONTENTS
2 x Phoenix Gold Component Speakers
2 x Phoenix Gold Tweeters with wires
2 x Phoenix Gold Speaker Grilles
1 x Mounting Template
8 x Mounting Screws
1 x User Manual
NOTE
Speaker Wire included with the
component speaker system will only
connect the tweeter to the speaker,
additional wiring is needed to
connect to the audio system.

Especificaciones del producto

Marca: Phoenix Gold
Categoría: Vocero
Modelo: Z65CS

¿Necesitas ayuda?

Si necesitas ayuda con Phoenix Gold Z65CS haz una pregunta a continuación y otros usuarios te responderán




Vocero Phoenix Gold Manuales

Vocero Manuales

Últimos Vocero Manuales