Pioneer CA-HM-HO.003 Manual de Usario

Lee a continuación 📖 el manual en español para Pioneer CA-HM-HO.003 (8 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
INSTALLATION INSTRUCTIONS FOR PART 99-7802CH
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 11/12/2012 INST99-7802CH
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
• ISO DIN head unit provision with pocket
Painted Charcoal
A) Radio Housing Trim Panel • B) Radio Brackets • C) Pocket • D) (4) #8 x 3/8 Phillips Truss-Head Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729 Honda Harness 2008-Up
Antenna Adapter: • 40-HD11 Honda Antenna Adapter 2009-Up
• Panel removal toolPhillips screwdriver • Socket Wrench
TOOLS REQUIRED
A B C D
Dash Disassembly
Honda CR-V 2012-up ........................................... 2
Kit Assembly
ISO DIN head unit provision with pocket ............... 3
99-7802CH
Dash Disassembly
1. Unclip and remove the a/c vents
from either side of the factory
radio. (Figure A)
2. Remove (4) Phillips screws
securing the radio. (Figure B)
3. Remove (2) Phillips screws
securing the factory hazard button
to the factory radio trim panel.
(Figure C)
4. Remove the (6) panel clips from
the factory radio trim panel and
save for Kit Assembly.
Continue to kit assembly
(Figure A) (Figure B)
(Figure C)
99-7802CH
Kit Assembly
1. Attach the (6) factory panel clips to
the radio housing. (Figure A)
2. Attach the factory hazard button
to the 7802 radio panel using the
factory screws. (Figure B)
ISO DIN head unit provisions
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8”
Phillips screws supplied.
(Figure A)
2. Slide the head unit into radio
brackets and secure with screws
supplied with the unit. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
(Figure A) (Figure A)
(Figure B) (Figure B)

Especificaciones del producto

Marca: Pioneer
Categoría: Niet gecategoriseerd
Modelo: CA-HM-HO.003

¿Necesitas ayuda?

Si necesitas ayuda con Pioneer CA-HM-HO.003 haz una pregunta a continuación y otros usuarios te responderán




Niet gecategoriseerd Pioneer Manuales

Niet gecategoriseerd Manuales

Últimos Niet gecategoriseerd Manuales