Pioneer CA-HR-FD-EVO.002 Manual de Usario

Pioneer No categorizado CA-HR-FD-EVO.002

Lee a continuación 📖 el manual en español para Pioneer CA-HR-FD-EVO.002 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Installation manual SPH-EVO93DAB-DUC | Version 1.0
EN - Installation Manual
Original dashboard
Screen brackets
Interface Dashboard cover
Screw covers
Cable cover
Screen cover
Result after the modification
Cut out the center supports / support bar
1 2
3
CA-HR-FD-EVO.002
INSTALLATION KIT FOR SPH-EVO93DAB-DUC
Compatibility:
Fiat Ducato from 2007 onwards
Peugeot Boxer from 2007 onward
Citroen Jumper from 2007 onwar
(open dash platform with ISO only)
Result after the cut
If the van comes with these ridges, please remove by cutting
to make space for the metal brackets.
Installation manual SPH-EVO93DAB-DUC | Version 1.0
Install right side bracket using the van’s original torx screw
Install the steering wheel interface
Locate the green 1 and black 2 connector
Install left side bracket using the van’s original torx screw
Open the fuse box by taking out 2 screws
4 5
6
7 8
1 To SPH power cable
2 To parking brake (green)
on SPH power cable
3 To reverse (purple)
on SPH power cable
4 Install vehicle fuse box
(see image 9 & 10)
5 Steering wheel control to
SPH unit backside
6 Install vehicle fuse box
(see image 11 & 12)
7 To van’s main connector
8 To fascia’s USB socket
9 To SPHs USB socket (backside)
1
2
3
4
5
6
7
8
9
1
2
Installation manual SPH-EVO93DAB-DUC | Version 1.0
Insert or splice the purple reverse cable
from the interface onto PIN number 4
Take the screen and install the metal support
using the 2 middle screws
Insert the pink speedpulse cable
from the interface in PIN number 56
After installing the interface, slide the unit into the dashboard, routing
the display cable underneath and tighten 4 small allen screws
Extension cable CD-RGB150E required
Remove the green connector and slide open
Put the fascia in (make sure to connect the USB on the panel)
and tighten with 2 screws
Remove the black connector and slide open
Screw the screen support onto the pioneer unit
using 6 flathead screws supplied with the unit
9
15
11
13
10
16
12
14

Especificaciones del producto

Marca: Pioneer
Categoría: No categorizado
Modelo: CA-HR-FD-EVO.002

¿Necesitas ayuda?

Si necesitas ayuda con Pioneer CA-HR-FD-EVO.002 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Pioneer Manuales

No categorizado Manuales

Últimos No categorizado Manuales