Pioneer pdp-s37 Manual de Usario

Pioneer Vocero pdp-s37

Lee a continuación 📖 el manual en español para Pioneer pdp-s37 (38 páginas) en la categoría Vocero. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/38

PDP-S37

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Speaker System

Enceintes acoustiques

Lautsprechersystem

Sistema di diffusori

Luidsprekersysteem

Sistema de altavoces

SRD1293A_01-07/En 6/16/05, 6:01 PM1

English

Thank you for buying this Pioneer product.

Please read through these operating instructions before using

your speaker system so you will know how to make the

most of its performance. After you have finished reading the

instructions, put them away in a safe place for future

reference.

WARNING:

Handling the power cord on this product or cords associated

with accessories sold with the product will expose you to

lead, a chemical known to the State of California and other

governmental entities to cause cancer and birth defects or

other reproductive harm.

Wash hands after handling.

CAUTION

This product is designed exclusively for use with the Pioneer

Plasma Display. For more information on compatibility, please

consult with your nearest Pioneer authorized dealer or service

center.

BEFORE USE

÷The nominal impedance of this speaker system is 8 ohms.

÷In order to prevent damage to the speaker system

resulting from input overload, please observe the

following precautions:

÷Do not supply power to the speaker system in

excess of the maximum permissable input. This can

result in damage or a possible fire hazard.

÷When connecting or disconnecting pin-plugs, be

sure that amplifier power is OFF.

÷When using a graphic equalizer to emphasize loud

sounds of a high frequency range, do not use

excessive amplifier volume.

÷Do not force a low-powered amplifier to produce a

loud volume of sound (the amplifier’s harmonic

distortion will be increased, and you may damage

the speaker).

÷Please handle the speakers with sufficient care, as

the grille net and the cabinet can become damaged

or broken when they are subjected to strong external

impacts.

÷Placing a CRT computer screen or CRT monitor near to

the speakers may result in interference or color distortion.

If this happens, distance the monitor from the speakers.

Installation

÷Consult your dealer if you encounter any difficulties

with this installation.

÷Pioneer is not liable for any damage resulting from

improper installation, improper use, modification, or

natural disasters.

CHECKING THE ACCESSORIES

7Speaker Cable × 2

Speakers Mounting Screw (M5 × 10 mm: Black) × 16

7Speaker Mounting Bracket

For LEFT-TOP

For LEFT-BOTTOM

For RIGHT-TOP

For RIGHT-BOTTOM

7Padding Strip × 2

(For Flush mounting)

When speakers are mounted Flush, they are affixed to

the side of the speaker as a buffer.

7Operating Instructions × 1

There are two ways to mount these speakers,

either Air mount or Flush mount.

7Air mount

There is a gap of air of about 15 mm between the speakers

and the display.

Speakers

7Flush mount

The speakers are direct against the display.

Speakers

CAUTION:

Do not place force on the speakers’ front panel grille net,

or stick your finger or other object into the front of the

speaker, since you may damage the grille net or speaker

unit itself.

Do not use these speakers with anything other than the

Plasma Display. Doing so may result in damage or fire.

SRD1293A_01-07/En 6/16/05, 6:01 PM2

English

MOUNTING THE SPEAKERS TO

YOUR PLASMA DISPLAY

Warning

Attach the Plasma Display to the stand before installing

the speakers. See the Operating Instructions packed

together with the stand for how to assemble the stand.

When mounting the speakers, only use the screws

enclosed. Using any screws other than those enclosed

may cause the speakers to come loose and fall.

When mounting the speakers, be sure to tighten the

screws securely so they will not come loose.

Do not lift up the display by the speakers. A speaker may

come off, so carry the display by holding it by the bottom

and its handle.

If you wish to change from Flush mounting to Air mounting

or vice versa:

Remove the speaker mounting brackets from the

speakers and the display and remount them from the

beginning.

1 Attaching the Speaker Mounting

Brackets to the Speakers

There is a left speaker and a right speaker. When you

are mounting them, check the label on the back to get

them right.

There are top and bottom speaker mounting brackets

for both the left and the right speaker. Attach the

appropriate bracket to the top and the bottom on the

back of the speakers with the enclosed screws. (See

Diagram)

The diagram depicts the mounting of the right

speaker. The left speaker mounts in the same way.

Air mounting

Place the speaker so its terminals (bottom)

are facing you. (Example of right speaker)

Flush mounting

Place the speaker so its terminals (bottom)

are facing you. (Example of right speaker)

2If mounting the speakers Flush, affix

the padding strip to the side of the

speakers (side that touches the

display).

Use the enclosed padding strips to buffer the speakers

when mounting them Flush. Peel off the protective strip

and affix to the side of the speakers.

(10)

Where to position the padding strip

Speaker Mounting Brackets

(For RIGHT- BOTTOM)

Screw Holes for Air mounting

(2 on outside)

Screw Holes for Air mounting

(2 on outside)

Speaker Mounting

Brackets

(For RIGHT-TOP)

(The skinny slot is used

for mounting to the top.)

Speaker Mounting Brackets

(For RIGHT-BOTTOM)

Screw Holes for

Flush mounting

(2 on inside)

Screw Holes for

Flush mounting

(2 on inside)

Speaker Mounting

Brackets

(For RIGHT-TOP)

(The skinny slot is

used for mounting to

the top.)

Padding Strip

SRD1293A_01-07/En 6/16/05, 6:01 PM3

Especificaciones del producto

Marca:	Pioneer
Categoría:	Vocero
Modelo:	pdp-s37
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Rotary, Touch
Color del producto:	Grijs
Bisagras de puerta:	Neer
Pantalla incorporada:	Ja
Ancho:	595 mm
Profundidad:	567 mm
Altura:	594 mm
Impuesto neto:	3500 W
Nivel de ruido:	53 dB
Clase-de-eficiencia-energética:	A+
Reloj integrado:	Ja
tipo de reloj:	Elektronisch
cocinar al vapor:	Ja
Capacidad interior total (hornos):	70 l
Número de hornos:	1
Posición de control:	Voorkant
tipo de limpieza:	Stoom
Consumo de energía (convencional):	1.09 kWu
Consumo de energía (convección forzada):	- kWu
Tamaño del horno:	Middelmaat
tipo de horno:	Elektrische oven
Potencia total del horno:	3500 W
Horno de capacidad neta:	- l
Rango de termostato del horno:	30 - 230 °C
Capacidad del tanque de agua:	0.95 l
Autolimpieza:	Ja
Subcalentamiento:	Ja
voltaje-de-entrada-de-CA:	240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Tipo-de-visualización:	LED
Escala de eficiencia energética:	A+++ tot D
Función de descongelación del horno:	Ja