Planet IGS-510TF Manual de Usario

Planet No categorizado IGS-510TF

Lee a continuación 📖 el manual en español para Planet IGS-510TF (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET Compact Industrial 4-Port
10/100/1000T + 1-Port 100/1000X SFP Gigabit Ethernet Switch,
IGS-510TF. In the following sections, the term “Industrial Gigabit
Ethernet Switch” means the IGS-510TF.
Open the box of the Industrial Gigabit Ethernet Switch and carefully
unpack it. The box should contain the following items:
Industrial Gigabit
Ethernet Switch x 1 User’s Manual x 1 Wall-mount Kit x 1
DIN-rail Kit x 1 RJ45 Dust Caps x 4 SFP Dust Cap x 1
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
Switch Fabric 10Gbps
Throughput
(packet per
second)
7.4Mpps@64bytes
Address Table 2K entries
Buer Memory 4M bits on-chip buer memory
Jumbo Frame 9Kbytes
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Stability Testing
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3az Gigabit SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Ecient Ethernet (EEE)
IEEE 802.1p Class of Service
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
Note
The wire gauge for the terminal block should be in the
range between 12 and 24 AWG.
Note
1. The power input range is for Indus9V ~ 48V DC -
trial Gigabit Ethernet Switch and supports 24V AC
2. Use one power input when using 24V AC.
3.5 Grounding the Device
Users MUST complete grounding wired with the device; otherwise,
a sudden lightning could cause fatal damage to the device.
Max. Fault Alarm Loading: 24V, 1A
V1+ V2+
PWR1 PWR2Alarm
DC Input: 9-48V
, 0.28A max.
AC Input: 24V
, 0.3A max.
1 2 3 4 5 6
Earth Ground
Note
EMD (Lightning) DAMAGE IS NOT COVERED UNDER
WARRANTY.
3.2 LEDDenition:
LED Color Function
P1 Green Lights to indicate power input 1 has power.
P2 Green Lights to indicate power input 2 has power.
1000
LNK/ACT Green
Lights to indicate the port is running at
1000Mbps speed and successfully established.
Blinks to indicate that the Switch is actively
sending or receiving data over that port.
10/100
LNK/ACT Amber
Lights to indicate the port is running
at 10/100Mbps speed and successfully
established.
Blinks to indicate that the Switch is actively
sending or receiving data over that port.
3.3 Switch Upper Panel
The upper panel of the Industrial Gigabit Ethernet Switch consists
of one terminal block connector within two power input.
V1+ V1-
PWR1
V2+ V2-
PWR2
DC Input: 9-48V , 0.6A max.
AC Input: 24V , 0.3A max.
1 2 3 4
Figure2: IGS-510TF Top View
2.ProductSpecications
Model IGS-510TF
Hardware Specications
Copper Ports 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X
ports
SFP Slot 1 1000BASE-SX/LX/BX SFP interface
compatible with 100BASE-FX SFP
Connector Removable 4-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for Power 2
Power
Requirements
9~48V DC, redundant power with reverse
polarity protection, power support24V AC
Power
Consumption
(Ethernet Full
Loading)
Max. 2.4 watts/8.1BTU
Dimensions
(W x D x H) 70 x 104 x 30 mm
Weight 239g
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount kit
ESD Protection 6KV
EFT Protection 6KV
Switch Specications
Switch
Architecture Store-and-Forward
3. Hardware Introduction
3.1 Switch Front Panel
The front Panel of the Industrial Gigabit Ethernet Switch consists of
Ethernet interfaces and LED indicators.
Front View
5
P1 P2
1
2
3
4
ACTLNK
ACTLNK
1000
10/
100
Figure1: IGS-510TF Front View
3.4 Wiring the Power Inputs
The terminal block connector on the top panel of Industrial Gigabit
Ethernet Switch is used for two redundant power inputs. Please
follow the steps below to insert the power wire.
Caution
When performing any of the procedures like inserting
the wires or tightening the wire-clamp screws, make
sure the power is OFF to prevent from getting an
electric shock.
1. Insert positive and negative DC power wires into contacts 1 and
2 for POWER 1, or contacts 3 and 4 for POWER 2.
V1+ V1-
PWR1
V2+ V2-
PWR2
DC Input: 9-48V , 0.6A max.
AC Input: 24V , 0.3A max.
1 2 3 4
2. Tighten the wire-clamp screws for preventing the wires from
loosening.
1 2 3 4
Power 1 Power 2
+ - + -
4. Installation
This section guides you to installing the Industrial Gigabit Ethernet
Switch on the DIN rail and wall. Please read this chapter completely
before continuing.
Note
This following pictures show how to install the device.
However, the device in the picture is not IGS-510TF.
4.1 DIN-rail Mounting Installation
1
2
4.2 Wall-mount Plate Mounting
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
4.3 Side Wall-mount Plate Mounting
Caution
You must use the screws supplied with the wall-
mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate your warranty.
Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource on PLANET web site rst to check if it could
solve your issue. If you need more support information, please
contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
5. Three-View Diagram
The three-view diagram of the Industrial Gigabit Ethernet
Switch consists of multiple auto-sensing 10/100/1000BASE-T RJ45
ports and one 100/1000X SFP slot removable terminal , and one
block. The LED indicators are also located on the front panel.
IGS-510TF
104.00
30.00
70.00
18.00
9.00
91.00
52.00 52.00
28.00
48.80 40.00
18.00
40.00
18.00
15.20
15.00
11.00
45.00
10.00
147.00
28.00 28.00
Mounting Kit
Mounting Kit
DIN-Rail Kit
Unit: mm
Rear ViewSide View Side View
Top View
Front View
Bottom View
5
P1 P2
1
2
3
4
ACTLNK
ACTLNK
1000
10/
100
V1+ V1-
PWR1
V2+ V2-
PWR2
DC Input: 9-48V , 0.6A max.
AC Input: 24V , 0.3A max.
Figure3: IGS-510TF Three-View Diagram
FCC Warning
This device has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
WEEE Warning
To avoid the potential eects on the environment and
human health as a result of the presence of hazardous
substances in electrical and electronic equipment, end
users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol. Do
not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2- - -2- -2219 9518 Fax:886 2219 9528
EC Declaration of Conformity
I hereby confirm that the following equipment complies with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility Directive on (2014/30 U/E ).
Type of Product:
Industrial Compact 4-Port 10/100/1000T + 1-Port 100/1000X SFP Gigabit Ethernet Switch
Model:
IGS-510TF
Produced by:
Manufacturer’s Name: Planet Technology Corporation
Manufacturer’s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan, R.O.C.
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 (2015 + AC:2016)
EN 55024 (2010 + A1:2015)
EN 55035 (2017)
Person responsible for making this declaration
Name: Kent Kang
Title: Director
Taiwan
March 23, 2020
Country
Date
Legal Signature

Especificaciones del producto

Marca: Planet
Categoría: No categorizado
Modelo: IGS-510TF

¿Necesitas ayuda?

Si necesitas ayuda con Planet IGS-510TF haz una pregunta a continuación y otros usuarios te responderán


No categorizado Planet Manuales

Planet

Planet WRE-1200 Manual de Usario

17 Octubre 2024
Planet

Planet MGB-LX Manual de Usario

4 Octubre 2024
Planet

Planet MGB-L120 Manual de Usario

2 Octubre 2024
Planet

Planet MTB-LB20 Manual de Usario

30 Septiembre 2024
Planet

Planet MFB-TFA40 Manual de Usario

27 Septiembre 2024
Planet

Planet MFB-F60 Manual de Usario

21 Septiembre 2024
Planet

Planet LS100-SMK Manual de Usario

19 Septiembre 2024
Planet

Planet IGS-1000-4UP2X Manual de Usario

19 Septiembre 2024
Planet

Planet NMS-AIoT Manual de Usario

19 Septiembre 2024
Planet

Planet NMS-ST Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024