Planet POE-165 Manual de Usario

Planet No categorizado POE-165

Lee a continuación 📖 el manual en español para Planet POE-165 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET IEEE 802.3at Power
over Ethernet plus Injector, POE-163/POE-165.
Model LAN Port Speed PoE
Standard
PoE
Budget
POE-163 10/100/1000Mbps
802.3at/
802.3af 30 watts
POE-165 10/100/1000Mbps/
2.5Gbps/5Gbps
“802.3at PoE+ Injector” used in this user’s manual
refers to the POE-163/POE-165.
Unpack the box of the IEEE 802.3at Power over
Ethernet plus Injector carefully and the box should
contain the following items:
The IEEE 802.3at Power over Ethernet plus Injector x 1
User’s Manual x 1
AC Power Cord x 1
If any of these are missing or damaged, please contact
your dealer immediately. If possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
2. Product Features
Interface
2 RJ45 interfaces
1-port Data + Power output
1-port Data input
1 AC 100-240V input power socket
Power over Ethernet
Power over Ethernet Mid-span PSE
IEEE 802.3at PoE Plus compliant
Backward compatible with IEEE 802.3af PD device
Supports PoE Power up to 30 watts for PoE+ port
Auto-detects PoE IEEE 802.3at/802.3af equipment
and devices for preventing damage from incorrect
installation
Remote power feeding up to 100m
Hardware
Plastic case
LED indicators for Power LED and Active LED (PoE
ready-in-use)
Standard Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3bz 2.5Gbps/5GbpsBASE-T
(POE-165 only)
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)
FCC Part 15 Class B, CE
Note
PSE (Power Sourcing Equipment) is
a device (switch or hub for instance) that
will provide power in a PoE setup. The
maximum continuous output power allowed
for each IEEE 802.3at/IEEE 802.3af device
is 30W/15.4W.
PDs (Powered Devices) like IP phones,
network cameras and wireless access
points, etc. are PoE-enabled terminals and
thus they are power sourcing equipment
(PSE).
3. Product Specications
Product POE-163 POE-165
Hardware Specications
Interface
“Data”
Input Port 1 x RJ45 STP
“PoE (Data
+ Power)”
Output Port
1 x RJ45 STP
AC Input
Power
Socket
1
LED Indicator
System: Power x 1 (Green)
PoE Port: Active, PoE ready/
In Use x 1 (Green)
Network Cable
10BASE-T: 2-pair UTP Cat. 3,
4, 5, up to 100m (328ft)
100BASE-TX: 2-pair UTP Cat.
3, 4, 5, up to 100m (328ft)
1000BASE-T: 2-pair UTP Cat. 5,
5e, 6 up to 100m (328ft)
2.5Gbps/5GbpsBASE-T: 2-pair
UTP Cat. 5e, 6, 7 up to 100m
(328ft)*
EIA/TIA- 568 100-ohm STP
(100m)
Data Rate
10/100/
1000Mbps
10/100/
1000Mbps/
2.5Gbps/5Gbps
Dimensions
(W x D x H) 115 x 62.5 x 31 mm
Weight 185g 204g
Unit Output Voltage DC 50-54V, 0.6A
Power Requirements 100-240V AC, 50/60Hz, 0.75A
Power Consumption 30 watts max.
Number of devices
that can be powered 1
Operating
Temperature 0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Operating Humidity 5 ~ 95%, relative humidity,
non-condensing
Storage Humidity 5 ~ 95%, relative humidity,
non-condensing
Power over Ethernet
PoE Standard IEEE 802.3at Power over
Ethernet Plus/Mid-span PSE
PoE Power Output DC 50-54V/30 watts
PoE Power Supply
Type Mid-span
Power Pin Assignment 4/5(+), 7/8(-)
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast
Ethernet
IEEE 802.3ab 1000BASE-T
Gigabit Ethernet
IEEE 802.3bz 2.5Gbps/5Gbps
BASE-T Gigabit Ethernet*
IEEE 802.3af Power over
Ethernet (802.3at Type 1)
IEEE 802.3at Power over
Ethernet (802.3at Type 2)
Regulatory
Compliance FCC Part 15 Class B, CE
* Remark: For model POE-165 only
4. Product Outlook
Figures 1 & 2 show an overview of the 802.3at PoE+
Injector
Rear Panel
Front Panel
Top Panel
Bottom
Figure 1: POE-163 Outlook
Rear Panel
Front Panel
Top Panel
Bottom
2.5Gbps 5Gbps
10/100/1G
Figure 2: POE-165 Outlook
LED Indicators
LED Color Function
POWER Green Lights to indicate that the 802.3at PoE+
Injector has power.
ACTIVE Green
Lights o to indicate the port is not
providing 50-54V DC in-line power.
Lights to indicate the port is providing
50-54V DC in-line power.
5. Hardware Installation
The following section describes the hardware features
of the 802.3at PoE+ Injector. Before connecting any
network device to the 802.3at PoE+ Injector, read this
chapter carefully.
This POE-163 provides three dierent running speeds –
10Mbps/100Mbps/1000Mbps and the POE-165 provides
ve dierent running speeds – 10Mbps/100Mbps/1000M
bps/2.5Gbps/5Gbps in the same device for automatically
distinguishing the speed of the incoming connection.
Please refer to following sections for detailed information
about the IEEE 802.3at Power over Ethernet plus
Injector.
5-1 Before Installation
Before your installation, it is recommended to check
your network environment. If there is any IEEE 802.3at
devices that need higher power to power on and work
normally, the 802.3at PoE+ Injector can provide you
with power for this Ethernet device easily. The 802.3at
PoE+ Injector is equipped with an AC power cord with
100-240V AC input and injects DC 50-54V power into
the pin of the twisted-pair cable (pair 4, 5 [+] and pair
7, 8 [-]).
If a power socket for the AC-DC adapter of your non
IEEE 802.3at networked device is not available, the
802.3at PoE+ Injector and POE-162S can provide you
with DC power for this Ethernet device easily.
- 9 -
- 10 -
- 11 -
- 12 - - 13 -
Note
The 802.3at PoE+ Injector and POE-162S
can be installed in pair. However, the
use of third-party device is allowed if the
device complies with IEEE 802.3at Power
over Ethernet.
The 802.3at PoE+ Injector Installation
1. Connect the AC power cord to the of the “AC slot”
802.3at PoE+ Injector; the LED will be “POWER”
steadily on.
2. Connect a standard network cable from a switch/
workstation to the port of the 802.3at PoE+ “LAN”
Injector.
3. And connect the Injector to a remote device like a
PoE PTZ IP camera over the UTP cable.
** The 802.3at PoE+ Injector can directly connect with
any IEEE 802.3at/802.3af end-nodes, such as PTZ
IP and speed dome cameras, color touch-screen
Voice over IP (VoIP) telephones, multi-channel wire-
less LAN access points, etc. The installation is shown
in Figure 3 below.
Switch
100 meters
PoE
PoE PTZ
IP Camera
802.3at PoE Injector
AC
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Power Line (AC)
AC
Figure 3: Connection to IEEE 802.3at/802.3af Devices
When the 802.3at PoE+ Injector detects the existence
of an IEEE 802.3at/802.3af device, the ACTIVE LED
indicator will be steadily on to show it is providing
power.
Note
1. Since the 802.3at PoE+ Injector PoE port
supports 50-54V DC PoE power output,
please check and assure the powered
device’s (PD) acceptable DC power range
is 50-54V DC. Otherwise, it will damage
the PD.
2. If the connected device is not fully
complying with IEEE 802.3at/802.3af
Power over Ethernet or in-line power
device, the LED indicator of the 802.3at
PoE+ Injector will not be steadily on.
The 802.3at PoE+ Injector and POE-162S, the
IEEE 802.3at Injector Splitter Installation
1. Connect the AC power cord to of the “AC slot”
802.3at PoE+ Injector; the LED will be “POWER”
steadily on.
2. Connect a standard network cable from the “POE”
port of the 802.3at PoE+ Injector to the “PoE In”
port of the POE-162S. The LED of the “ACTIVE”
802.3at PoE+ Injector and PoE-in-use LED of the
POE-162S will continue to be lit.
3. Connect a standard network cable from a switch/
workstation to the port of the 802.3at PoE+ “LAN”
Injector.
4. Connect the UTP cable in the package from the
“Ethernet” port of the POE-162S to the RJ45 port of
a remote device.
5. Adjust the proper DC power output and connect the
DC plug from the of the POE-162S to a “DC OUT”
remote device.
6. Power on the remote device and its power LED indi-
cator will remain on.
Switch
Power 12V/24V
POE-162S
100 meters
PoE
AC DC
Non-PoE PTZ
IP Camera
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Power Line (AC)
AC
DC
Power Line (DC)
802.3at PoE Injector 802.3at PoE
Splitter
Figure 4: Connection architecture over 802.3at PoE+
Injector/POE-162S
Note
1. Owing to IEEE 802.3at/802.3af Power
over Ethernet standards, the 802.3at
PoE+ Injector will not inject power
over the cable if not connected to IEEE
802.3at/802.3af devices.
2. Please ensure the POE-162S output
voltage is correct before applying power
to remote devices.
The 802.3at PoE+ Injector and POE-E201 IEEE
802.3at PoE+ Extender Installation
1. Connect the AC power cord to the of the “AC slot”
802.3at PoE+ Injector; the LED will be “POWER”
steadily on.
2. Connect a standard network cable from the “POE”
port of the 802.3at PoE+ Injector to the port of “IN”
the POE-E201.
3. The 802.3at PoE+ Injector delivers both Ethernet
Data and PoE power over UTP cable to the POE-E201
and the LED of the 802.3at PoE+ Injector “ACTIVE”
and the LED of the POE-E201 will continue “PoE IN”
to be lit.
4. Connect an additional standard network cable that
will be used to connect from the port of the “OUT”
POE-E201 to a remote Powered Device (PD).
5. The “OUT” port of the power injector transmits DC
voltage over the standard network cable and trans-
fers data and power simultaneously between the
802.3at PoE+ Injector and the PD.
6. Once the POE-E201 detects the existence of an IEEE
802.3at/802.3af device, the LED indi“PoE OUT” -
cator will be steadily on to show it is providing power.
802.3at
PoE Extender
PoE PoE
100 meters100 meters
200 meters
Power Line (AC)
AC
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
PoE IP Camera
802.3at PoE Injector
Figure 5: Connection architecture over 802.3at PoE+
Injector/POE-E201
Note
1. If the connected device is not fully
complying with IEEE 802.3at/802.3af
standards or in-line power device, the
PoE OUT LED indicator of the POE-E201
will not be steadily on.
2. Owing to IEEE 802.3at/802.3af
standards, the POE-E201 will not inject
power over the cable if a standard IEEE
802.3at/802.3af device is not connected.
Customer Support
Thank you for purchasing PLANET products. You can
browse our online FAQ resource at the PLANET Web
site rst to check if it could solve you issue. If you
need more support information, please contact PLANET
support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php?type=2
Support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Especificaciones del producto

Marca: Planet
Categoría: No categorizado
Modelo: POE-165

¿Necesitas ayuda?

Si necesitas ayuda con Planet POE-165 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Planet Manuales

Planet

Planet WRE-1200 Manual de Usario

17 Octubre 2024
Planet

Planet MGB-LX Manual de Usario

4 Octubre 2024
Planet

Planet MGB-L120 Manual de Usario

2 Octubre 2024
Planet

Planet MTB-LB20 Manual de Usario

30 Septiembre 2024
Planet

Planet MFB-TFA40 Manual de Usario

27 Septiembre 2024
Planet

Planet MFB-F60 Manual de Usario

21 Septiembre 2024
Planet

Planet LS100-SMK Manual de Usario

19 Septiembre 2024
Planet

Planet IGS-1000-4UP2X Manual de Usario

19 Septiembre 2024
Planet

Planet NMS-AIoT Manual de Usario

19 Septiembre 2024
Planet

Planet NMS-ST Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024