Planet POE-175-95 Manual de Usario

Planet No categorizado POE-175-95

Lee a continuación 📖 el manual en español para Planet POE-175-95 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET POE-175-95 Single-port
10/100/1000Mbps 802.3bt PoE++ Injector.
Please unpack the box of the device carefully, and the box should
contain the following items:
802.3bt PoE injector x 1 User’s manual x 1
AC power cord x 1 Ground cable x 1
If any item is found missing or damaged, please contact your local
reseller for replacement.
3.ProductSpecications
Product POE-175-95
Hardware Specications
Interface
Input Port 1 x RJ45 STP Data In
Output Port 1 x RJ45 STP PoE (Data + Power) Out
AC Socket 1 x AC input socket
DIP Switch BT, UPoE or Legacy BT Mode
Network Cable
Twisted-pair cable up to 100 meters
(328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
LED Indicators
PWR x 1 (Green)
PoE-in-Use x 1 (Green)
PoE Max x 1 (Green)
Data Rate 10/100/1000Mbps
Dimensions (W
x
D
x
H) 170 x 100 x 40 mm
Weight 443g
Unit Output Voltage DC 54V
Power Requirements AC 100-240V, 1.8A max.
Power Consumption Max. 1 watts/3.41 BTU (No Loading)
Max.111 watts/378.5 BTU (Full loading)
No. of Devices that
Can be Powered 1
LED Indicators:
10/100/1000T
EthernetEthernet+DC
PWR
PoE-in-Use
PoE Max.
BTLegacy BT UPoE
LED Color Function
PWR Green Lights to indicate the device has power.
PoE-in-Use Green
Lights There is a PoE PD connected to the
port, which supplies power.
Blinks Indicates the port’s power supply is
abnormal.
O No PoE powered device (PD) connected.
Max. PoE
Usage Green Lights Indicating the output power reaches
80%
Operating Humidity 5 ~ 90%, relative humidity,
non-condensing
Storage Humidity 5 ~ 90%, relative humidity,
non-condensing
Caution
1. As IEEE 802.3bt device provides high power, please
use high-quality network cable and RJ45 connector.
2. The maximum PoE output power depends on the
cable length and the quality of cable.
2. Product Features
Interface
2 RJ45 interfaces
1-port Data input
1-port Data + Power output
1 AC 100-240V input power socket
1 DIP switch for selecting BT, UPoE or Legacy mode
Power over Ethernet
Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE
Supports PoE power up to 95 watts for PoE port
Auto-detection of PoE IEEE 802.3af/at/bt devices that may be
damaged by incorrect installation
Monitor the status of the total PoE usage in real time
Remote power feeding up to 100m
Hardware
All-in-one compact size design
Internal power supply
LED indicators for power, PoE-in-Use and maximum PoE usage
Power over Ethernet
PoE DIP Switch
IEEE 802.3af/at/bt PSE
UPoE
Legacy BT
PoE Power Output
Budget DC 54V / 95-watt PoE via 4-pair
PoE Power Output Max. 95W@1 m cable
Max. 73W@100 m cable
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit
Ethernet
IEEE 802.3bt 4-pair Power over Ethernet
Type 4
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
Regulatory Compliance FCC Part 15 Class A, CE
Surge Protection Dierence Mode: ±2KV,
Common mode: ±4KV
Electrostatic standard Contact 6KV, air 8KV
Environment
Operating Temperature 0 ~ 50 degrees C
Storage Temperature -40 ~ 70 degrees C
4. Product Outlook
100-240V AC, 50/60Hz
10/100/1000T
EthernetEthernet+DC
PWR
PoE-in-Use
PoE Max.
BTLegacy BT U PoE
Figure 1: Dimensions
5. Hardware Installation
The following section describes the hardware features of the
POE-175-95. Before connecting any network device to it, please
read this chapter carefully.
5.1 PoE Injector Grounding
A good grounding system is the groundwork for the smooth and
safe operation of the POE-175-95, and an excellent way to prevent
lightning strikes and resistance to interference. Please follow the
POE-175-95’s grounding specication instructions to ensure a good
grounding system.
Proper Grounding
When using an AC power source, the device must be grounded
with the green and yellow ground cables; otherwise, shock hazards
may occur when insulation resistance between the internal power
supply and the PoE Injector degrades.
Lightning and Grounding Protection
The lightning protection system is an independent system
consisting of a lightning rod, conductor and connection joint with
the grounding system. The grounding system usually is shared
with the ground reference, and green and yellow ground cables.
Lightning and grounding protection is a building requirement, not a
specic requirement of the PoE Injector.
The POE-175-95 provides chassis grounding post on its rear side.
Chassis grounding protection should be properly connected to the
grounding connector.
- 9 -
- 10 -
- 11 -
- 12 - - 13 -
The ground cabling procedure is as follows:
Step 1： Remove the nuts from the rear PoE Injector where the
grounding posts are.
Step 2： Wrap one end of the green and yellow grounding cables
to the grounding posts.
Step 3： Tighten the grounding post nut well.
Step 4： Attach the other end of the grounding cable to the
grounding connector.
Note
The grounding cable should be made of a good
conductor, and the diameter should be determined by
the possible maximum current that may pass through.
Bare conductor cabling is forbidden.
Ground resistance value: The combined grounding
resistance should be less than 1 ohm.
5.2 Before Installation
Before your installation, it is recommended to check your network
environment. If there is any IEEE 802.3bt device that needs to be
powered on and works normally, the POE-175-95 provides you with
a way out to supply power to this Ethernet device conveniently and
easily.
5.4 POE-175-95 Installation
1. Connect the AC power cord to the of the POE-175-95; “AC slot”
the “PWR” LED will be steadily on.
2. Connect a standard Ethernet cable from an Ethernet switch or
PC workstation to the port of the POE-175-95.“Ethernet”
3. Connect the long cable to the port.“Ethernet+DC”
4. Due to the capability of IEEE 802.3af/at/bt Power over Ethernet,
the POE-175-95 can directly connect with any IEEE 802.3af/at/
bt-compliant end nodes, such as PTZ (pan, tilt, zoom) network
cameras, color touch screen Voice over IP (VoIP) telephones and
multi-channel wireless LAN access points.
Figure 2: Architecture of connected IEEE 802.3af/at/bt devicea
Once the POE-175-95 detects the existence of an IEEE 802.3af/at/
bt device, the LED indicator will be steadily on to show PoE-in-Use
it is providing power.
Note
1. According to IEEE 802.3af/at/bt Power over
Ethernet, the POE-175-95 will not inject power to
the cable if not connected to IEEE 802.3af/at/bt-
compliant device.
2. Depending on the length of cable, the PoE power
received by a PD is different.
It is equipped with an AC power cord with 100-240V AC input and
injects DC 54V power into the pin of the twisted-pair cable (pair
1/2 [-], 3/6 [+] and pair 4/5 [+], 7/8 [-]).
5.3 Selectable Standard IEEE 802.3bt, UPoE or
Legacy mode
The POE-175-95 provides power to those powered devices which
do not fully follow the IEEE 802.3af/at/bt standard. The UPoE and
Legacy bt modes provide the PD with 60 to 95 watts of power
output voltage.
Modes Descriptions
BT mode Powered devices that fully support IEEE 802.3bt
standards with output budget of 90W.
UPoE mode Powered devices that support Cisco UPoE with
output budget of 95W.
Legacy BT Powered devices that support capacitive or
resistance electronic tag with output budget of 90W.
10/100/1000T
EthernetEthernet+DC
PWR
PoE-in-Use
PoE Max.
BTLegacy BT UPoE
5.5 POE-175-95 and POE-173S Installation
1. Connect DC plug from of the POE-173S to a remote "DC Out"
device.
2. Connect the AC power cord to the of the POE-175-95; “AC slot”
the “PWR” LED will be steadily on.
3. Connect a standard Ethernet cable from an Ethernet switch or
PC workstation to the port of the POE-175-95.“Ethernet”
4. Connect a standard Ethernet cable from port “Ethernet+DC”
of the POE-175-95 to the port of the POE-173S. The “PoE In”
“30W” “60W” “90W+”, or LED of the POE-173S and the
“PoE-in-Use” LED of the POE-175-95 will light up continuously.
5. Connect a standard Ethernet cable from the port of “Ethernet”
the POE-173S to the remote Ethernet device.
6. The remote device will be turned on and connected.
Figure 3: Architecture of connected POE-175-95 and POE-173S
Note
Please ensure the POE-173S output voltage is correct
before applying power to the remote device.
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan Tel:886-2-2219-9518 Fax:886-2-2219-9528
EC Declaration of Conformity
For the following equipment:
*Type of Product Single-Port 10/100/1000Mbps 802.3bt PoE Injector :
*Model Number : -175-95 POE
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive on
2014/30/EU and Low Voltage Directive 2014/35/EU.
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 2015+AC:2016, CLASS A
EN 61000-3-2 2014
EN 61000-3-3 2013
EN 55024 2010+A1:2015
EN 62368-1 2014
R esponsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
Person re sponsible for making this declaration
Name, Surname Jonas Yang
Position / Title : Director
Taiwan
8
th
Jan., 2019
.
Place
Date
Legal Signature
Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource at the PLANET Web site rst to check if
it could solve your issue. If you need more support information,
please contact PLANET support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq?method=category&c1=2
Support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2022
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Especificaciones del producto

Marca: Planet
Categoría: No categorizado
Modelo: POE-175-95

¿Necesitas ayuda?

Si necesitas ayuda con Planet POE-175-95 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Planet Manuales

Planet

Planet WRE-1200 Manual de Usario

17 Octubre 2024
Planet

Planet MGB-LX Manual de Usario

4 Octubre 2024
Planet

Planet MGB-L120 Manual de Usario

2 Octubre 2024
Planet

Planet MTB-LB20 Manual de Usario

30 Septiembre 2024
Planet

Planet MFB-TFA40 Manual de Usario

27 Septiembre 2024
Planet

Planet MFB-F60 Manual de Usario

21 Septiembre 2024
Planet

Planet LS100-SMK Manual de Usario

19 Septiembre 2024
Planet

Planet IGS-1000-4UP2X Manual de Usario

19 Septiembre 2024
Planet

Planet NMS-AIoT Manual de Usario

19 Septiembre 2024
Planet

Planet NMS-ST Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024