Polk S15 Manual de Usario

Polk Vocero S15

Lee a continuación 📖 el manual en español para Polk S15 (44 páginas) en la categoría Vocero. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/44

1. 1

Signature Series Owner’s Manual

S60, S55, S50, S35, S30, S20, S15, S10

EXPECT GREAT SOUND

S60 S55 S50 S35

S30

S20 S15 S10

1. 2

Technical Assistance or Service

If anything is missing or damaged, or if your speaker fails to

operate, notify Polk Audio Customer Service immediately at

800-377-7655. If, after following the hookup directions, you

experience difﬁculty, please double-check all wire connections.

Should you isolate the problem to the speaker, contact the

authorized Polk Audio dealer where you made your purchase,

or contact Polk Audio Customer Service 800-377-7655

(M-F, 9 a.m. -5:30 p.m. EST, US & Canada only) or via email

polkcs@polkaudio.com. Outside the US & Canada,

call +1 410-358-3600.

WARNING: Listen Carefully

Polk Audio loudspeakers and subwoofers are capable of playing

at extremely high volume levels, which could cause serious or

permanent hearing damage. Polk Audio, Inc. accepts no liability

for hearing loss, bodily injury or property damage resulting from the

misuse of its products. Keep these guidelines in mind and always

use your own good judgment when controlling volume:

• Limit prolonged exposure to volumes that exceed 85

decibels (dB). For more about safe volume levels, go to

the Occupational Health and Safety Administration (OSHA)

guidelines at http://www.osha.gov/.

Product Disposal

Certain international, national and/or local laws and/or regulations

may apply regarding the disposal of this product. For more

information, please contact the retailer where you purchased this

product or the Polk Importer/Distributor in your country. More

information is also available at www.polkaudio.com or by contacting

Polk Audio at 1 Viper Way, Vista, California, 92081, USA.

Phone: 1-800-377-7655.

This symbol on our electrical products or their

packaging indicates that it is forbidden in Europe to

discard the product in question as domestic waste.

In order to ensure that you dispose of the products

correctly, please dispose of the products according to

local laws and regulations on the disposal of electrical

and electronic equipment. In doing so you are

contributing to the retention of natural resources and

to the promotion of environmental protection by the

treatment and disposal of electronic waste.

Contents

Safety Instructions ................................................................ 3

What’s In The Box ................................................................ 4

How to Connect Your System............................................... 4

Signature Series Speaker Positioning .................................... 5

Speciﬁcations ....................................................................... 7

S10 Wall Mount Template ..................................................... 43

Expect Great Sound

Thank you for choosing the Polk Signature Series of

loudspeakers. This new line is bold, stylish and quality-built

for performance. The high efﬁciency Signature Series features

Polk patented Dynamic Balance® tuned drivers and tweeters

for clearer highs and more realistic mid-range. Power Port

technology creates bigger, more musical, deep bass impact.

The Polk Signature Series is equipped with an expanded array

of high performance state-of-the-art audio technologies that

elevate home theater and music with incredible detail. And

with their American modern styling, each speaker features

gorgeous curves and aggressive accents that ﬁts any décor.

Pure and simple, the Polk Signature Series are American HiFi

engineered and designed with your entertainment in mind

Having built our reputation as “The Speaker Specialists” for

more than 40 years, we take pride in our superior sound

and build quality, which features many patented and award-

winning audio innovations. For the people of Polk, building

audio products is not just a job—it’s a passion. And if you’re

going to remember one thing, remember this: We live by the

truest principle of what audio should deliver—great sound at

an affordable price for everyone!

Signature Series

1. 3

Safety Instructions

This product was designed and manufactured to meet strict quality

and safety standards. Please note the following installation and

operation precautions:

1. Read Instructions. All the safety and operating instructions

should be read before the system is operated.

2. Retain Instructions. The safety and operating instructions

should be retained for future reference.

3. Heed Warnings. All warnings on the products and in the

operating instructions should be adhered to.

4. Follow Instructions. All operating and use instructions should

be followed.

5. Damage Requiring Service. Unplug this product from the

ampliﬁer or receiver and refer servicing to qualiﬁed service

personnel under the following conditions:

a. If liquid has been spilled, or objects have fallen into

the product.

b. If the product has been exposed to rain or water.

c. If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualiﬁed technician to

restore the product to its normal operation.

d. If the product has been dropped or the cabinet has

been damaged.

e. When the product exhibits a distinct change in

performance this indicates a need for service.

6. Carts and Stands. The products should be used only with

a cart or stand that is recommended by the manufacturer.

An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause

the appliance and cart combination to overturn. Use caution

when moving the cart/apparatus combination to avoid injury

from tip-over.

7. Correct Use. This product is not intended for use outdoors.

8. Register Your Product. Registering your product is the best

way to ensure we can contact you regarding safety notices.

Safe Limits of Operation

Polk Audio speciﬁes the recommended ampliﬁcation range for

each of its passive (non-ampliﬁed) loudspeakers. Typically that

speciﬁcation will be expressed as a range of power such as

20-200 Watts (per channel). It is important to understand what

those numbers mean when choosing a receiver or ampliﬁer for

your Polk loudspeakers. The lower number indicates the lowest

continuous rated power that will yield acceptable performance in

a typical listening environment. The higher number indicates the

highest per channel power that should be used with your Polk

speakers. That number should not be confused with a “Power

Handling” speciﬁcation, and it does not imply that the speaker will

safely handle that full amount of power on a long-term basis. We

specify a wide range of power ratings because not all electronics

manufacturers use the same method for rating power. In fact, high

quality lower-rated ampliﬁers sound better and play louder than low

quality units with higher power rating.

Similarly, we recommend using ampliﬁers and receivers with rated

power above the Power Handling limits of our speakers because

having extra power available for short term peaks is conducive to

better sound quality, maximum dynamic range and effortless high

volume output. But we strongly urge you not to use the full power

of your ampliﬁer or receiver for daily listening.

Loudspeakers can be damaged when an ampliﬁer, regardless of

its wattage, is made to play at higher listening levels than its power

can clearly produce. Operation at this level can result in very high

levels of audible distortion originating in the ampliﬁer, which can

add a harsh, gritty sound to your listening material. Simply put,

avoid excessive ampliﬁer volume. If you hear distortion—turn the

volume down or risk damaging your speakers. You can damage

just about any speaker, regardless of power rating, if you drive an

ampliﬁer to or beyond the point of distortion. And always make}

sure the ampliﬁer is turned off when you’re connecting or

disconnecting cables.

Especificaciones del producto

Marca:	Polk
Categoría:	Vocero
Modelo:	S15
Peso.:	1000 g
Ancho:	244 mm
Profundidad:	244 mm
Altura:	70 mm
red LAN:	Ja
Resolución Máxima:	4096 x 2160 Pixels
Cables suministrados:	SATA
Número de puertos USB 2.0:	5
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
HDCP:	Ja
Versión HDMI:	2.1
Número de DisplayPorts:	1
Soporta Windows:	Windows 10 x64, Windows 11 x64
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	3
Zócalo del procesador:	LGA 1700
Fabricante del procesador:	Intel
Memoria interna máxima:	128 GB
Canales de salida de audio:	7.1 kanalen
ETC:	Ja
Tipo de interfaz Ethernet:	2.5 Gigabit Ethernet
placa base con chipset:	Intel B660
Versión DisplayPort:	1.2
Tipo de ranura de memoria:	DIMM
Controladores suministrados:	Ja
Ranuras PCI Express x16:	2
Soporte RAID:	Ja
Interfaces de unidad de almacenamiento compatibles:	M.2, SATA III
Componente para:	PC
Tipos de incursión:	0, 1,5, 10
Número de conectores SATA III:	4
No ECC:	Ja
Procesadores compatibles:	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Tipos de memoria soportados:	DDR4-SDRAM
Máx. número de procesadores SMP:	1
Wifi.:	Nee
Código del Sistema Armonizado (SA):	84733020
Tipos de unidades de almacenamiento compatibles:	HDD & SSD
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	2133,2400,2666,2933,3000,3200,3300,3333,3400,3466,3600,3666,3733,3800,3866,4000,4133,4266,4300,4400 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	256 Mbit
Versión ACPI:	5.0
Versión del BIOS de administración del sistema (SMBIOS):	2.7
Soporte para procesamiento paralelo:	2-Way CrossFireX, Quad-GPU CrossFireX
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	3
Conector de alimentación ATX (24 pines):	Ja
Conector del panel frontal:	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
monitor de salud de la computadora:	CPU, FAN, Temperature, Voltage
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Conector TPM:	Ja
Salida-S/PDIF:	Ja
Borrar puente CMOS:	Ja
Número de ranuras M.2 (M):	2
conector de alimentación de 12V:	Ja
Carril de conexión LED RGB:	Ja
Cabezales Thunderbolt:	2
Encabezados de puerto serie:	1
Versión Interfaz de administración de escritorio (DMI):	2.7
Conectores USB 3.2 (3.1 Gen 2):	1