Polk T50 Manual de Usario

Polk Vocero T50

Lee a continuación 📖 el manual en español para Polk T50 (24 páginas) en la categoría Vocero. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

T Series Owner’s Manual

T15, T30 and T50

Polk Audio History—A Passion for Sound

Polk Audio was founded in Baltimore in 1972 by Johns Hopkins

University graduates, Matthew Polk and George Klopfer. Today,

Polk Audio is a leading manufacturer of high-quality home, car

and multimedia and the largest audio brand of Sound United.

Polk products emphasize superior sound and build quality, and

feature many patented and award-winning innovations. Having

built their reputation as “The Speaker Specialists” for more than

40 years, Polk products are sold throughout the USA, Canada

and in more than 50 countries around the world. Polk Audio’s

mission is simple: Build high-quality, great-sounding speakers at

affordable prices. For the people of Polk Audio, building speakers

is not just a job—it’s a passion.

Important Notice

Please ﬁnd the serial number located on the back of the product.

It’s a good idea to write this number on the warranty sheet and put

it in a safe place should you need to reference it later.

Prior to Using Equipment

Polk Audio thanks you for your purchase. Make sure to read this

user guide in full before using your speaker system. It will ensure

that you get the most from the product and understand all safety

requirements. Once you’re done reading the user guide, put it in

a safe place for later reference.

To avoid damaging your speaker from input overload, please note

the following:

• Don’t supply power to the speaker system that exceeds

its maximum input

• Always make sure the ampliﬁer is turned off when your

connecting or disconnecting cables

• If you’re using a graphic equalizer to highlight those high

and low frequencies, avoid excessive ampliﬁer volume

• Never leave your speaker playing unattended

Contents

How to Connect Your System .............................................. 3

T Series Speaker Positioning ................................................ 3

Adding Adhesive-Backed Rubber

Feet to the T-Series............................................................... 4

Cleaning Your Polk Speakers................................................. 4

Speciﬁcations ....................................................................... 5

T15 Keyhole Template .......................................................... 23

Technical Assistance & Contact ............................................ 24

T Series

How to Connect Your System

To get the best sound quality, it’s important to wire your

speakers correctly.

How to Use Binding Post Connectors

Loosen hex nut and insert bare speaker wire through hole.

Tighten hex nut down to make connection.

Note: Do not insert insulated section of wire into hole

(you will not get a connection).

Basic Speaker Hookup

Make sure that the red (+) and black (-) connectors on your

ampliﬁer or receiver connect to the red (+) and black (-)

connectors on your speakers. If your speakers sound “thin,”

with little bass and little or no center image, odds are that one

of the speaker wires is connected backwards. Double check

all connections.

Placement Recommendations for the T30 Center

Channel Speaker

The most popular placement for your T30 center channel speaker

is on a shelf below your ﬂat screen TV (if you have an older box

TV, a popular option is to place your center channel speaker on

top of it, anchoring the dialogue and effects to the screen).

Processor Mode for the T30 Center Channel Speaker

Note: Set Center Channel Speaker to “small” in your receiver’s

Bass Management Settings.

The “bass management” or “speaker conﬁguration” menus of

most surround receivers offer the choice of “normal” or “wide”

modes for center channel operation. In discrete channel digital

processors, these modes are referred to as “small” and “large.”

Normal (small) mode ﬁlters bass frequencies from the center

channel speaker and sends them instead to the front left and right

main speakers or to the subwoofer output (LFE) jack. Wide (large)

mode sends an unﬁltered, full-range signal to the center channel

speaker. Use the Small (normal) mode for optimum center (and

surround) channel performance and reliability.

T Series Speaker Positioning

To maximize the sound quality of your Speaker system—

whether you’ve purchased T15 Bookshelf Speakers, a T30 center

channel speaker, or T50 tower speakers—correct placement is

everything. Take a look at the following examples and give them

a try based on the T Series speakers you’ve purchased.

Note: Your T Series speakers are compatible with 2.0, 2.1, 3.1,

5.1, 7.1 and 9.1 setups (optional subwoofer shown in graphics).

Power Ampliﬁer

Especificaciones del producto

Marca:	Polk
Categoría:	Vocero
Modelo:	T50
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Touch
Color del producto:	Zwart
Número de niveles de potencia:	17
Pantalla incorporada:	Ja
Temporizador:	Ja
Peso.:	11485 g
Ancho:	592 mm
Profundidad:	522 mm
Altura:	51 mm
Longitud del cable:	1.1 m
Bloqueo infantil:	Ja
Tipo de material (arriba):	Glas
Potencia quemador/zona de cocción 2:	1400 W
Potencia quemador/zona de cocción 3:	2200 W
Potencia quemador/zona de cocción 1:	2600 W
Número de quemadores/zonas de cocción:	3 zone(s)
tipo de placa:	Inductiekookplaat zones
Quemador/zona de cocción tipo 1:	Extra groot
Quemador/zona de cocción tipo 2:	Sudderen
Tipo de quemador/zona de cocción 3:	Groot
Fácil de limpiar:	Ja
Número de quemadores de gas:	0 zone(s)
Número de zonas de cocción electrónicas:	3 zone(s)
Posición de control:	Boven voorzijde
Carga conectada (eléctrica):	- W
Ancho del compartimento de instalación:	560 mm
Altura del compartimento de instalación:	51 mm
Carga conectada (gas):	- W
Ancho de la placa:	60 cm
Función de impulso:	Ja
Profundidad del compartimento de instalación (min):	490 mm
Indicador de calor residual:	Ja
Tipo de marco:	Frameloos
Fuente de alimentación quemador/zona de cocción 1:	Electrisch
Fuente de alimentación quemador/zona de cocción 2:	Electrisch
Fuente de alimentación quemador/zona de cocción 3:	Electrisch
Profundidad del compartimento de instalación (máx.):	500 mm
Posición del quemador/zona de cocción 1:	Links
Diámetro quemador/zona de cocción 1:	280 mm
Posición quemador/zona de cocción 2:	Rechts achter
Quemador/zona de cocción diámetro 2:	150 mm
Posición quemador/zona de cocción 3:	Rechts voor
Quemador/zona de cocción diámetro 3:	210 mm
Forma zona de cocción 1:	Rond
Forma zona de cocción 2:	Rond
Forma zona de cocción 3:	Rond