Power Dynamics BT20 Manual de Usario

Power Dynamics receptor BT20

Lee a continuación 📖 el manual en español para Power Dynamics BT20 (16 páginas) en la categoría receptor. Esta guía fue útil para 15 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/16
BT20 Compact BT Amplier
Ref. nr.: 952.508
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCION ES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this Power Dynamics pro ct. Please read this manual thoroughly prior to using the unit in du
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/ electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock. or
Keep the manual for future reference.
- or to using the unit, please ask advice from a Pri
specialist. When the unit is switched on for the rst time, fi
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and mal nction. fu
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- not plug or unplug the unit with wet hands. Do
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid re and shock hazard, do not e ose the unit to xp
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use e unit in humid rooms or outdoors. th
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of ildren. Do not leave ch
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is th speaker inside which can cause wi
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product fo a long period of r
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for r airs, otherwise serious ep
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the origi l packing material so that you can na
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attrac the attention of the user to important instructions that are contained in the manual and that he should ts
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
t ir guarantee! he
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask yo local authorities or your ur
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your wa y. The warranty is not a licable in case of accidents or damages caused by inappropriate use or disrespect of the warnings rrant pp
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediate upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are ly
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear dam e from shipping or the package itself shows signs of mishandling. Save the package and all packing ag
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and pack ing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperatu . re
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The oduct must also pr
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (fuse).
INSTALLATION
1. Connect your speakers correctly with the speaker output terminal of the 2 amplier module. BT 0 BT
For the left speaker, make sure to connect with the left 2 slots of the output terminal. For the right speaker, the right 2
slots should be used.
2. Insert the adapter to power the unit (2A) use the DC POWER connectors alternatively (2B). or “ ” input
3. Enable the function on your device (smartphone, tablet, etc.) containing the music you want to play. Search for possible BT
BT connections and NAMICS . select “POWER DY ” to make a connection If a password is required, enter “1234”.
Besides streaming your content vi , it is also possible to connect your music source via USB (3A) SD card slot (3B). a BT or
4. The indicator LED shows the current status of the BT20 module. When powering on the device, the LED will ash quickly.
When using BT playback, the LED will ash slowly hen using USB or SD playback, the LED will ash quickly. . W

Especificaciones del producto

Marca: Power Dynamics
Categoría: receptor
Modelo: BT20

¿Necesitas ayuda?

Si necesitas ayuda con Power Dynamics BT20 haz una pregunta a continuación y otros usuarios te responderán


receptor Power Dynamics Manuales

Power Dynamics

Power Dynamics Powerline A50W Manual de Usario

14 Septiembre 2024
Power Dynamics

Power Dynamics WT460A Manual de Usario

14 Septiembre 2024
Power Dynamics

Power Dynamics PPA50 Manual de Usario

27 Agosto 2024
Power Dynamics

Power Dynamics BT20 Manual de Usario

19 Agosto 2024
Power Dynamics

Power Dynamics PRM240 Manual de Usario

19 Agosto 2024

receptor Manuales

Últimos receptor Manuales

Crown

Crown CDi DriveCore 2|300BL Manual de Usario

27 Octubre 2024
Boss

Boss PT3000 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies PBM120AT Manual de Usario

27 Octubre 2024
Fosi Audio

Fosi Audio V3 Manual de Usario

26 Octubre 2024
Jensen

Jensen CAR710-4BC Manual de Usario

25 Octubre 2024
Onkyo

Onkyo TX-RZ830 Manual de Usario

24 Octubre 2024
Pioneer

Pioneer VSX-1122K Manual de Usario

22 Octubre 2024
Yamaha

Yamaha HTR-5072 Manual de Usario

21 Octubre 2024
NAD

NAD C 355BEE Manual de Usario

20 Octubre 2024
Yamaha

Yamaha RX-A810 Manual de Usario

20 Octubre 2024