Power Dynamics NCBT601 Manual de Usario

Lee a continuación 📖 el manual en español para Power Dynamics NCBT601 (16 páginas) en la categoría Vocero. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
NCBT Series Amplied Ceiling Speaker BT
Ref. nr.: 952.628; 952.630; 952.631; 952.632; 952.634; 952.635; 952.636;
952.640
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.5
2
ENGLISH
Congratulations to the purchas of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in e
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all pr autions to ec
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the it is switched on for the rst time, un
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore, do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may ca e electrical shock and malfunction. us
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains l d and do not damage it. A ea
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the ins lead are damaged, they ma
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. DO
NOT connec the unit to a rheostat or dimmer. t
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a -16A fuse. 10
- ring a thunderstorm or if the unit will not be used for a Du
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occ . Let the unit reach room ur
temperature before you switch it on.
- For use in humid rooms or outdoors: refer to the
installation guidelines for safe assembly.
- To prevent accidents in companies, you must follow the
applicable guidelines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the lifetime.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, al ys seek advice from wa
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product has a built-in lead-acid rechargeable
battery. Please re arge the battery every 3 months if ch
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is aged, please replace with same dam
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from elec onic equipment that may cause tr
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure tha the mains t
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and at are of sucient th
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to ke any changes to the unit. They would invalidate the CE certicate and ma
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not put into household waste. Please bring them to a recycling centre. Ask your local authorities or your be
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can b changed without prior notice.e
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
INSTALLATION
1. Drill a hole in the ceiling, big enough to t the speaker
(check technical specification sheet for size).
2. Connect the a e speaker with the 12VDC adapter. ctiv
3. Connect active and passive speak with speaker ble er ca
( -) if applicable. +/
4. Insert the speaker in the hole.
5. Tighten each of the adjusting screws rmly (the locking
tabs will swivel into the rear surface).
6. Place the metal grill.
CONNECTING WITH BT
Before starting the BT connection be sure that the BT-function on active speaker is switched ON.
Connecting your BT-device to the speaker, follow below steps:
1. Turn on BT-function on your device (mobile phone, tablet etc.)
2. Search for “ BT
3. Connect with “ BT
Your device is now connected, no password nee ded.
DISCONNECTING OR RECONNECTING
If you want to change from BT-device, follow below steps:
1. Disconnect the current BT- device (“OFF”)
2. Connect new BT-device by following above steps
If y thou move out of range or turn o the BT function on your BT-device, e BT of the speaker will disconnect. To
reconnect turn on the BT on the desired device, it will reconnect.

Especificaciones del producto

Marca: Power Dynamics
Categoría: Vocero
Modelo: NCBT601

¿Necesitas ayuda?

Si necesitas ayuda con Power Dynamics NCBT601 haz una pregunta a continuación y otros usuarios te responderán




Vocero Power Dynamics Manuales

Vocero Manuales

Últimos Vocero Manuales