Pride Go Go Elite Traveller Plus 3-Wheel Manual de Usario

Pride scooter de movilidad Go Go Elite Traveller Plus 3-Wheel

Lee a continuación 📖 el manual en español para Pride Go Go Elite Traveller Plus 3-Wheel (124 páginas) en la categoría scooter de movilidad. Esta guía fue útil para 22 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/124

T R A V E L S C O O T E R F E A T U R E S T A B L E

*NOTE: Travel Scooter options vary by country. Please contact your Provider to determine which options are available for your Travel Scooter.

Travel Scooter Series 3

S A F E T Y G U I D E L I N E S

WARNING! An authorized Provider or qualiﬁ ed technician must perform the initial setup of this

scooter and must perform all of the procedures in this manual.

The symbols below are used throughout this owner’s manual and on the scooter to identify warnings and important

information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated

procedures can cause either personal injury, component damage, or malfunction. On the

product, this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as speciﬁ ed. Failure to perform mandatory

actions can cause personal injury and/or equipment damage. On the product, this icon is

represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any

time or in any circumstances. Performing a prohibited action can cause personal injury and/or

equipment damage. On the product, this icon is represented as a black symbol with a red circle

and red slash.

INFMANU4392/Rev K/October 2021

NOTE: Please become familiar with your Travel Scooter’s model number. The number can be found on the

product speciﬁ cation sheet in your owner’s package. Throughout this owner’s manual, Travel Scooter attributes

are indentiﬁ ed by model number (far left-hand column on Travel Scooter Features Table). Knowing your unit’s

model number will aid you in determining your particular Travel Scooter’s unique characteristics.

The intended use of the Pride Mobility Products device is to provide mobility to persons limited to a seated

position that have the capacity of operating a scooter.

CAUTION! Federal law restricts this device to sale by or on the order of a physician or other

certiﬁ ed personnel licensed by the law of the State (US only) or region in which this personnel

practices to use or order the use of the device.

NOTE: This owner’s manual is compiled from the latest speciﬁ cations and product information available at

the time of publication. We reserve the right to make changes as they become necessary. Any changes to our

products may cause slight variations between the illustrations and explanations in this manual and the product

you have purchased. The latest/current version of this manual is available on our website.

NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.

NOTE: This product meets IPX4 classiﬁ cation (IEC 60529).

NOTE: The Travel Scooter and its components are not made with natural rubber latex. Consult with the

manufacturer regarding any after-market accessories.

4 Travel Scooter Series

S A F E T Y G U I D E L I N E S

ADVISORY STATEMENT REGARDING CERTAIN COMPONENTRY INCORPORATED

BY THIRD-PARTY MANUFACTURERS INTO FINISHED TRAVEL SCOOTERS: When

scooters, seating systems, or other components are incorporated into a ﬁ nished

Travel Scooter manufactured or assembled by any third party, that third party is

responsible to assure the safety, functionality, and legal compliance of the ﬁ nished

Travel Scooter We make no representation concerning the safety, functionality, or

legal compliance of the ﬁ nished Travel Scooter or its componentry manufactured

by a third party. While we make every effort to assure that our components are

distributed responsibly, manufacturers, distributors, and consumers are reminded

that ﬁ nished Travel Scooters must comply with a variety of standards and

requirements for governmental safety and functionality.

If it is necessary to physically modify a Travel Scooter, including the addition of

third-party componentry, to accommodate the medical needs of the Travel Scooter

occupant, a risk assessment in conformance with ISO 14971, as outlined in ISO_

DIS_7176-19 (preliminary release), should be performed.

Changes to Travel Scooters that are likely to affect conformance and risk evaluation

include but are not limited to: moving the securement-point brackets; lowering

the back-support height; shortening the seat length; adding secondary postural

supports that are not ﬁ rmly attached to the Travel Scooter; adding components

that have sharp edges (i.e., edges with less than 0.08 in. [2 mm] radius); or any

change that compromises the structural integrity of the Travel Scooter frame.

Travel Scooter Series 5

C O N T E N T S

SAFETY GUIDELINES ............................................................................................. 3

I. SAFETY ........................................................................................................... 6

II. YOUR TRAVEL SCOOTER .............................................................................. 8

III. BATTERIES AND CHARGING ....................................................................... 19

IV. OPERATION .................................................................................................. 26

V. COMFORT ADJUSTMENTS .......................................................................... 28

VI. DISASSEMBLY AND ASSEMBLY ................................................................. 32

VII. BASIC TROUBLESHOOTING ........................................................................ 34

VIII. CARE AND MAINTENANCE .......................................................................... 36

6 Travel Scooter Series

Manufactured in

Fully charge batteries before operating.

Remove key from an unattended Travel Scooter.

Read and follow the information in the owner’s manual.

I . S A F E T Y

PRODUCT SAFETY SYMBOLS

The symbols below are used on the Travel Scooter to identify warnings, mandatory actions, and prohibited actions.

It is very important for you to read and understand them completely.

NOTE: There are more warnings identiﬁ ed and explained in the Consumer Safety Guide that is included

with your Travel Scooter. Please become familiar with all the warnings and safety information found in the

Consumer Safety Guide and refer to this resource often.

Indicates UNOCCUPIED Travel Scooter securement points.

Scooter information label

Does not meet ISO 7176-19 standards for occupied

transport in a motor vehicle. When travelling in a motor

vehicle, do not sit in your Travel Scooter.

or or

Travel Scooter Series 7

I . S A F E T Y

GENERAL

MANDATORY! Do not operate your new Travel Scooter for the ﬁ rst time without completely

reading and understanding this owner’s manual and the Consumer Safety Guide.

Your Travel Scooter is a state-of-the-art life-enhancement device designed to increase mobility. We provide an

extensive variety of products to best ﬁ t the individual needs of the Travel Scooter user. Please be aware that the

ﬁ nal selection and purchasing decision regarding the type of Travel Scooter to be used is the responsibility of the

Travel Scooter user who is capable of making such a decision and his/her healthcare professional (i.e., medical

doctor, physical therapist, etc.).

The contents of this manual are based on the expectation that a mobility device expert has properly ﬁ tted the

Travel Scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Provider

in the instruction process for the use of the product.

There are certain situations, including some medical conditions, where the Travel Scooter user will need to practice

operating the Travel Scooter in the presence of a trained attendant. A trained attendant can be deﬁ ned as a family

member or care professional specially trained in assisting a Travel Scooter user in various daily living activities.

As you begin using your Travel Scooter during daily activities, you will probably encounter situations in which

you will need some practice. Simply take your time and you will soon be in full and conﬁ dent control as you

maneuver through doorways, on and oﬀ elevators, up and down ramps, and over moderate terrain.

Additional general information can be found on the supplemental information sheets and booklets included in

your Owner’s Package. Please fully read and review the information, and keep it readily available for future

reference.

Below are some precautions, tips, and other safety considerations that will help you become accustomed to

operating the Travel Scooter safely.

PRE-RIDE SAFETY CHECK

Get to know the feel of your Travel Scooter and its capabilities. We recommend that you perform a safety check

before each use to make sure your Travel Scooter operates smoothly and safely.

Perform the following inspections prior to using your Travel Scooter:

Check the condition of the tires. Make sure they are not damaged or excessively worn.

Check all electrical connections. Make sure they are tight and not corroded.

Check all harness connections. Make sure they are secured properly.

Check the brakes to ensure they operate properly.

Check the battery condition meter to ensure the batteries are fully charged.

Ensure the manual freewheel lever is in drive mode before sitting on the Travel Scooter.

If you discover a problem, contact your authorized Provider for assistance. Please refer to the Contact Information

insert in your Owner’s Package.

Travel Scooter Series 9

I I . YO U R T R AV E L S C O O T E R

Figure 3. Tiller Console C (Models 40E [Australia only], 44E [Australia only], 53HD, 54HD)

Figure 4. Tiller Console D (Models 40LX, 44LX, 50LX, 50LXLIT, 53, 54, 54LX, 54LXLIT, 73, 74)

Figure 5. Tiller Console E (Model Jazzy ZTS)

Travel Scooter Series 13

I I . YO U R T R AV E L S C O O T E R

Manual Freewheel Levers - Jazzy ZTS

For your convenience, your travel scooter has a manual freewheel lever on each motor. Manual freewheel levers

enable you to disable the drive system in order to maneuver the Travel Scooter manually. See  gure 9.

WARNING! Do not use the Travel Scooter while the drive motors are disengaged! Do

not disengage the drive motors when the travel scooter is on an incline or decline,

as the unit could roll on its own! Only engage the freewheel mode when on a level

surface.

WARNING! It is important to remember that when your Travel Scooter is in freewheel

mode, the braking system is disengaged.

NOTE: It is strongly recommended that you do not charge your batteries while in freewheel mode.

NOTE: You must turn oﬀ the power before disabling the drive systems; otherwise, you may get an error code

on the scooter. To clear this code, turn oﬀ the scooter and place the travel scooter in drive mode. Then turn on

the scooter. The error message should be cleared. If not, contact an authorized Provider.

IDENTIFICATION KEY

1. Manual Freewheel Levers

2. Anti-tip Wheels

Figure 9. Rear Components - Jazzy ZTS

Freewheel Mode (Drive Disengaged)

Drive Mode (Drive Engaged)

To engage or disengage the drive system:

1. Locate the levers on the rear section of the scooter. See  gure 9.

2. Pull the two levers toward the rear of the travel scooter to engage the drive motors (drive mode).

3. Push the two levers toward the front of the travel scooter to disengage the drive motors (freewheel mode).

If a lever is diﬃ cult to move in either direction, rock your travel scooter back and forth slightly. The lever should

then move to the desired position.

WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.

Travel Scooter Series 15

I I . YO U R T R AV E L S C O O T E R

IDENTIFICATION KEY

1. Battery Pack

2. Battery Pack Handle

3. Charger Power Cord Receptacle

4. Battery Pack Fuse

5. Main Circuit Breaker (Reset Button)

6. Battery Terminals

7. Tiller Console Fuse

Battery Pack Style A Battery Pack Style B Battery Pack Style D

Figure 10. Battery Pack

(Travel Scooter Deck)

Especificaciones del producto

Marca:	Pride
Categoría:	scooter de movilidad
Modelo:	Go Go Elite Traveller Plus 3-Wheel
Color del producto:	Zwart
Longitud del cable:	1.5 m
Manual de usuario:	Ja
Tipo de conector USB:	USB Type-A
Tipo de fuente de energía:	USB
Número de teclas, teclado:	105
Cantidad por paquete:	1 stuk(s)
Tipo de retroiluminación:	RGB LED
Uso recomendado:	Gamen
Iluminar desde el fondo:	Ja
Conexión:	USB
Teclado numérico:	Ja
Incluye ratón:	Nee
Dispositivo señalador:	Nee
Teclas de Windows:	Ja
Diseño del teclado:	QWERTY
Interruptor de tecla del teclado:	Mechanische keyswitch
Tamaño del teclado:	Volledige grootte (100%)
Teclado de estilo:	Recht
Dimensiones del teclado (AnxPrxAl):	425 x 135 x 45 mm
Peso del teclado:	770 g
Número-de-productos-incluidos:	1 stuk(s)
Lenguaje del teclado:	Engels
Teclas multimedia:	Ja
Anti-fantasma:	Ja
Retroiluminación personalizable:	Ja