Pyle PPHP1299AI Manual de Usario

Lee a continuación 📖 el manual en español para Pyle PPHP1299AI (8 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
USER’S MANUAL
PPHP1291 PPHP1591
PPHP1294A PPHP1594A
PPHP1299AI PPHP1599AI
www.pyleaudio.com
1
Before using your new Speaker System Please review the
following instructions, for the safety and investment.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the controls on the minimum
level. On the contrary the system could damage
1. - Plug the power cable to the AC outlet and to the system and to the speaker
2. - Plug the Microphone in the “MIC” input
3.- Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input
4.- Turn on the systems. A green LED will light up to indicate the speaker is on
5.- Set the volume on the low level on the MIC and the LINE IN input
6.- Increase the master volume (place on the right side of LINE OUT* connector)
7.- Set TREBLE and BASS controls to equalize the sound.
8.- A red LED will light up when the system detects overload power. You will must decrease
the volume.
CAUTIONS
Do not place the microphone against the speaker, it can cause feedback echo and it will
damage the system
EXTRA FUNCTIONS
6.3 and canon connectors marked as LINE OUT can handle an amplifier or even another
powered speaker cabinet ,in cascade. On the bottom of the speaker there is a hole to place
a stand.
2
FEATURES:
PPHP1291: 12” 1000 Watt 2 Way Plastic Molded Speaker Cabinet
12'' Woofer
1.4'' Titanium Compression Driver
1/4” and Speakon Jacks input
Frequency response: 50-20 KHz
Power :1000 Watts
Impedance: 8 ohm
Crossover Frequency: 3.5K Hz
35mm Speaker Stand Mount
Dimensions: W15.6” x D12” x H 23.3”
PPHP1294A: 12” 1000 Watt Powered 2 Way Plastic Molded Speaker Cabinet
12" Woofer
1.4" Titanium Compression Driver
Dual XLR and 1/4" Mic Inputs
XLR Stereo RCA Line Input
XLR and 1/4" Line Outputs
Master Volume, Bass Treble Controls
Frequency response: 50-20 KHz
Power Output: 1000 Watts
Crossover Frequency: 3.5K Hz
35mm Speaker Stand Mount
110/220 Voltage Selectable
Dimensions: W15.6” x D12” x H 23.3”
PPHP1299AI: 12” 1000 Watt Powered 2 Way Plastic Molded Speaker Cabinet w/Built in
MP3 & Ipod Dock
Power Switch and Digital amplifier.
12" Woofer
1.4" Titanium Compression Driver
MP3 control with LCD display
USB Terminal
IPOD DOCK
XLR and 1/4" Mic Inputs
XLR Stereo RCA Line Input
XLR and 1/4" Line Outputs
Volume, Bass Treble Controls
Frequency response: 50-20 KHz

Especificaciones del producto

Marca: Pyle
Categoría: Base/estación de acoplamiento
Modelo: PPHP1299AI

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PPHP1299AI haz una pregunta a continuación y otros usuarios te responderán




Base/estación de acoplamiento Pyle Manuales

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales