Pyle PWMA220BM Manual de Usario

Pyle Base/estación de acoplamiento PWMA220BM

Lee a continuación 📖 el manual en español para Pyle PWMA220BM (4 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
Portable Karaoke PA Speaker Amplifier
and Microphone System
PWMA220BM
Wireless BT Streaming, Built-in Rechargeable Battery
(Includes Belt Pack Transmitter, Headset, Lavalier & Wired Handheld Microphone)
www.PyleUSA.com www.PyleUSA.com
*Wireless Microphone Operating Frequency Range: 203.4 - 215.2 MHz
FEATURES
1. Built-in Wireless BT Streaming MP3 player.
2. Built-in one channel wireless microphone and one 6.35mm MIC in socket to
connect wired dynamic MIC. Two persons can speak or sing at the same time.
3. One 3.5mm keyboard in socket to connect electronic device. And one 3.5mm
cassette in socket to connect cassette player or other audio player.
4. One 3.5mm REC out socket can be connected to a recording device or to the
input jack of a power amplier to further amplify and enlarge the audio power.
5. Master power/volume control. Bass,Treble and Echo controls.
Suitable for karaoke.
6. Powered externally with AC, 12V DC or internally with built-in 12V/1.8A
lithium battery or (6) x 'D' Batteries. Suitable for both indoor and outdoor use.
7. Ideal for many applications, including use in classrooms, conference/meeting
rooms, churches, health clubs and small auditoriums.
CAUTION
1. This unit is with speaker inside which can cause magnetic eld.
Keep this unit at least 60cm away from computer or TV.
2. This unit is with built-in rechargeable battery. Please recharge the battery
every 2 months if you are not going to use the unit for a long period of time
or the battery may be damaged.
3. If the battery is damaged please replace with same specications battery
and dispose the damaged battery environment friendly.
4. Free from high temperature. Don't expose the device to the hot equipment.
5. Don't place the device in the environment of humidity and dirts.
6. Place the device in the ventilated environment.
7. Don't pull the power cord while you pull out the plug. Hold the plug tightly
to pull it out.
8. Pull out the AC power if you will not use the device for a long time.
9. Your operation must be subjected to the specied voltage marked near the
AC in jack and complied with this guide.
1 2
PARTS DESCRIPTION
1. Echo control
2. Treble control
3. Bass control
4. Power/volume switch
5. MIC IN socket
6. DC IN socket
7. Power indicator
8. Battery charging indicator
9. Wireless receiver RF indicator
10. Wireless receiver antenna
11. MP3 LED display
12. MP3 mode
13. MP3 play/pause/repeat
14. MP3 previous/volume down
15. MP3 next/volume up
16. USB port
17. Microphone holder
18. Speaker
19. Keyboard in socket
20. Cassette in socket
21. REC out socket
22. Battery compartment for
(6) x 'D' Batteries
18
1 2 3 4 5 6 7 8 9
12
13
14
15
16
17
10
11
19
20
21
22
www.PyleUSA.com www.PyleUSA.com
OPERATION ON AC POWER
Plug one end of provided AC cord into the AC input jack on the left side
of the amplier. Then plug the other end of AC cord into AC power outlet. Turn
on the unit using the power/volume switch.
NOTE: To avoid damaging your unit, make sure AC power is same as that
marked near AC input jack)
OPERATION ON DC POWER
This unit can be powered also using external 12V DC power. Connect external
12V DC power to DC input jack on the front of the amplier. Observe the
correct polarity as following.
OPERATION ON RECHARGEABLE BATTERY
This unit can be powered internally using the built-in rechargeable battery.
When AC power is connected, if battery charging indicator lights red, the
rechargeable battery is not fully charged and will be allowed to charge while
the unit is powered by the AC power. ( Turning o the unit power switch Note:
will allow the battery to recharge more quickly.) If the battery charging indica-
tor lights green, the battery is fully charged and ready to power the unit alone.
Shut o the power switch and disconnect the AC power. Turn the unit back on
and the rechargeable battery will power the unit alone.
OPERATION ON 'D' BATTERIES
This unit can also be powered internally with (6) x 'D' Batteries. Insert the
batteries while observing the correct polarity as marked. For longest operation
use only alkaline or rechargeable batteries. Replace the batteries when the
output volume drops or the range of the wireless decreases.
Note: This unit does not recharge batteries. When using 'D' Batteries, do not
connect AC or DC power.
3 4
CONNECTION
• The KEYBOARD IN socket can be connected to a electronics device.
• The socket can be connected to a cassette player or other CASSETTE IN
audio player.
• The socket can be connected to a recording device or to the input REC OUT
jack of a power amplier to further amplify and enlarge the audio power.
• The socket can be connected to wired dynamic MIC. Keep MIC head MIC IN
away from the speaker of main unit to avoid feedback.
BLUETOOTH/MP3 OPERATION
1. Insert ash drive into USB port or Micro SD Memory Card into Micro SD
card slot, system will play the music in ash drive or Micro SD Card
automatically. If both ash drive and Micro SD Memory Card are inserted,
system will play the music in ash drive. To play music in Micro SD Memory
Card press MODE button to switch to SD mode.
2. To play music from your mobile phone etc via bluetooth, press MODE button
to switch to BT mode. Turn on bluetooth function of your mobile phone and
search for Pyle Audio and connect. Then you can play your music in mobile
phone.
ATTENTION
1. If feedback (howling sound) occurs, try rst turning down the treble control.
If feedback still is present, try turning down the volume or repositioning this
unit with respect to the wired or wireless microphone being used.
2. Extend the antenna fully whenever using the wireless microphone to ensure
optimum performance and maximum range.
BELT PACK TRANSMITTER OPERATION
Parts Description
1. Power On/O/Mute switch
2. MIC input socket
3. Power/low battery Indicator
4. Gain adjustment
5. Battery compartment/cover
6. Lapel MIC
7. Headset MIC
5
41 2 3
6
7

Especificaciones del producto

Marca: Pyle
Categoría: Base/estación de acoplamiento
Modelo: PWMA220BM

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PWMA220BM haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento Pyle Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Pyle

Pyle PHST92IBGL Manual de Usario

20 Septiembre 2024
Pyle

Pyle PWPBT75BL Manual de Usario

13 Septiembre 2024
Pyle

Pyle PHST94IPGL Manual de Usario

13 Agosto 2024
Pyle

Pyle PLBSKBT55 Manual de Usario

6 Agosto 2024
Pyle

Pyle PWPBT05PU Manual de Usario

5 Agosto 2024
Pyle

Pyle PWPBT10 Manual de Usario

5 Agosto 2024
Pyle

Pyle PMS2R Manual de Usario

5 Agosto 2024
Pyle

Pyle PMS2W Manual de Usario

31 Julio 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Jam

Jam Splash Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024
Denver

Denver BTL-350 Manual de Usario

5 Octubre 2024
Onkyo

Onkyo DSA5 Manual de Usario

4 Octubre 2024