Quoizel Buchanan BCN1716WT Manual de Usario

Quoizel Alivio Buchanan BCN1716WT

Lee a continuación 📖 el manual en español para Quoizel Buchanan BCN1716WT (2 páginas) en la categoría Alivio. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
1of2
Assembly Instruction Sheet #IS-BCN1716WT
For Style BCN1716WT
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
ACrossbar Assembly
x 1
STEP 1 Install Crossbar Assembly-
A. Pass the supply wires through the Crossbar
Assembly (A). Attach the Crossbar
Assembly (A) to the Outlet Box with the
head of the Green Ground Screw facing
you. Secure it with Outlet Box Screws (not
included). Tighten until snug.
August2015
STEP 2 Fit Ceiling Canopy to
Crossbar Assembly
-
A.
eiling canopy of the Socket
Assembly to the
ceiling
Remove mounting balls from the
Crossbar Assembly (A). Fit the
c
(B) Crossbar
Assembly (A) and secure with
mounting balls. Note: The
should be snug against the
and the mounting balls. If
Not, adjust the length of the nipple
on the Crossbar Assembly (A) by
unscrewing the preassembled hex
nut and lock washer and then
screwing the mounting screws in
ceiling
canopy of the Socket Assembly
(B)
or out of the crossbar until the correct length is achieved. Once the
is secure, remove the
mounting ball and Socket Assembly (B) and proceed to Step 3.
ceiling canopy of the Socket Assembly (B)
Package Contents
Mounting Screw
Hex Nut and
Lock Washer
BA
Mounting Ball
STEP 3 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Twist
connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires into the Outlet Box.
White wire
from fixture
Black wire
from fixture
Ground wire
from fixture
White wire
from supply
Black wire from
supply (or Red)
Ground wire
from supply
Supply Wires
with Ground Wire
Outlet Box Screws
(not included)
Outlet
Box
Please go to for product cleaning tips. Go to the selection.
(3) A19 Medium Base 100W Maximum. Alternate Bulbs (3) 23W CFL.
30-45 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
www.quoizel.com Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
B
Socket
Assembly
x 1
CSide Arm
x 3
DShade
x 1
ECage
x 1
Figure 1
Figure 2
A
Figure 3
STEP 4 Install Fixture Body-
A. Carefully tuck all wires into the
outlet box and position the ceiling
canopy of the Socket Assembly
(B) over the outlet box. Align the
holes in the ceiling canopy of the
Socket Assembly (B) with the
mounting screws, then attach the
ceiling canopy using the
previously removed mounting
balls. Hand tighten until snug.
Mounting
Screw
BA
Mounting
Ball
Figure 4
STEP 5 Assemble Shade, Cage and Bulbs-
A. Place the Shade (D) inside of the Cage (E).
B. Attach one ends of Side Arms (C) to Hooks on the side of the Socket
D
E
C
B
Hook
Hook
Bulb
Socket
Assembly (B). Lift the Cage with
Shade upward and attach another
ends of Side Arms (C) to Hooks
on the top edge of the Cage (E).
Carefully release your hands
after all Side Arms (C) are hung
properly.
C. This fixture uses standard bulb
with standard screw base.
Maximum 100 watts. Insert bulb
and screw snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
Figure 5
2of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc. August2015
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/4"
NO. PART NUMBER REPLACEMENT PART DESCRIPTION
1
1
G12158SH SHADE
(3) 100W
Bulbs
(Not Supplied)
Medium
Base
BCN1716WT
FINISH: WESTERN BRONZE
REQ.
16” Dia.
14” Dia.
5.75
14.25
6” Dia.
1

Especificaciones del producto

Marca: Quoizel
Categoría: Alivio
Modelo: Buchanan BCN1716WT

¿Necesitas ayuda?

Si necesitas ayuda con Quoizel Buchanan BCN1716WT haz una pregunta a continuación y otros usuarios te responderán




Alivio Quoizel Manuales

Alivio Manuales

Últimos Alivio Manuales