Rinnai Enviroflo Heat Pump Manual de Usario

Rinnai Calderas y calderas Enviroflo Heat Pump

Lee a continuación 📖 el manual en español para Rinnai Enviroflo Heat Pump (28 páginas) en la categoría Calderas y calderas. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/28

Enviroﬂo Heat Pump Hot Water Systems

Operation & Installation Manual

Rinnai 2 EHPA Heat Pump OIM

This appliance must be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3500

• Local Regulations and Municipal Building Codes

including local OH&S requirements

This system must be installed, commissioned, serviced,

maintained and removed ONLY by an Authorised Person.

FOR EXTERNAL USE ONLY

NOT SUITABE AS A POOL OR SPA HEATER

For continued safety of this appliance it must be installed

and maintained in accordance with the manufacturer’s

instructions.

AS/NZS 2712

Lic No. 1849

SAI Global

AS3498 Lic W00169

SAI Global

Rinnai 3 EHPA Heat Pump OIM

Warnings and Important Information 4

Safety and Regulatory Information 4 ��

Transport and Storage of Appliance 5 ��

Scald Hazards 6 ��

Operation Principle 7 ��

Safety Devices 8 ��

Excessive Discharge from Safety Devices 8 ��

Hydrogen Gas 9 ��

Turning Off the Water Heating System 9 ��

Turning On the Water Heating System 9 ��

Draining and Filling 9 ��

Maintenance and Regular Care 9 ��

Save a Service Call 10

Specications 12

System Specications �� 12

Dimensions 13 ��

Clearances 14 ��

Installation 15

Regulations and Occupation Health and Safety (OH&S) 15 ��

Location 15 ��

Water Supply 16 ��

Storage Temperature �� 16

Hot Water Delivery Temperature 16 ��

Valves and Fittings 16 ��

Transport and Handling 17 ��

Positioning the Heat Pump 17 ��

Connect the PTR Valve 18 ��

Plumbing Connections 18 ��

Connect Cold / Hot Water Supply �� 19

Connect Condensate Drain line 20 ��

Electrical Connections 20 ��

Filling the System 22 ��

Finishing the Installation 22 ��

Operation Sequence of Controller 23 ��

Controller LED Flashing Codes 24 ��

Contact 28

TABLE OF CONTENTS

Especificaciones del producto

Marca:	Rinnai
Categoría:	Calderas y calderas
Modelo:	Enviroflo Heat Pump
Color del producto:	Aluminium
Altura:	200 mm
Material:	Aluminium
Longitud:	400 mm
Compatibilidad:	Gewiss MTX/E 160
Número de polos:	3P - 4P
Salida de corriente nominal:	630 A
Cantidad de módulos (máx.):	10 module(s)