Rinnai RSEP1S25N Manual de Usario

Lee a continuación 📖 el manual en español para Rinnai RSEP1S25N (40 páginas) en la categoría Calderas y calderas. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/40
2
SE+ Series Infrared Gas Heater Installation and Operation Manual
NOTICE:
Rinnai reserves the right to make changes to equipment and specifications without obligation
or notification. This publication, or parts thereof, may not be reproduced in any form, without
prior written consent from Rinnai. Unauthorized use or distribution of this publication is strictly
prohibited.
Improper installation, adjustment, alteration, service or mainte-
nance can cause property damage, injury or death.
Read the installation and operating and maintenance instructions
thoroughly before installing or servicing this equipment.
SAFETY ALERT:
This heater must be installed and serviced only by a trained gas service technician. Failure to
comply could result in personal injury, death, fire and/or property damage.
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other gas fired appliance.
Indoor Applications The heater cannot be used indoors in a residence: .
IF YOU SMELL GAS:
Extinguish any open flame
Do not attempt to light this or any other appliance
Don t touch any electrical switch, or telephone
Immediately leave the area and call your gas supplier from a neighbor s phone
Follow any and all instruction from your gas supplier
If your gas supplier is not available, call the fire department
WARNING
FIELD CONVERTIBILITY:
This appliance is field convertible to
LP gas (except RSEP2S50N: NG only).
Only use kit available from Rinnai.
Follow kit instructions and all local and
national codes.
INSTALLER: PRESENT THIS MANUAL
TO THE END USER.
Keep this manual in a secure place.
Record for future reference:
Model #:
Serial #:
(located on heater rating label)
All models approved:
ANSI Z83.26-2014 / CSA 2.37-2014
Gas-Fired Infrared Patio Heater for Outdoor Commercial / Residential Application
ANSI Z83.19a-2011 / CSA 2.35a-2011
Gas-Fired High Intensity Infrared Heater for Commercial /Industrial Non-Residential
Application for either indoor or outdoor installation
All models constructed with Marine Grade Stainless Steel Cabinet
3 SE+ Series Infrared Gas Heater Installation and Operation Manual
TABLE OF CONTENTS
TOPIC PAGE NUMBER
IMPORTANT INFORMATION READ FIRST-
IMPORTANT WARNINGS ........................... 4
HEATER EXPANSION ................................ 5
GAS CONNECTION .................................... 5
VENTING .............................................. 5, 13
SMOKE DISCOLORATION’ & ...................5
MOUNTING & CLEARANCE DISTANCES:
OUTDOOR PATIO INSTALLATION ....... 6
INDOOR INSTALLATION ...................... 9
1. APPLICATION ................................................ 11
OUTDOOR / PATIO .................................... 11
INDOOR INSTALLATION ........................... 11
2. AIRCRAFT HANGARS .................................... 12
3. GARAGES & PARKING STRUCTURES .......... 12
4. OTHER THAN SPACE HEATING .................... 12
5. PRE-INSTALLATION SURVEY ....................... 12
6. INSTALLATION REQUIREMENTS .................. 13
6.1 MOUNTING CLEARANCES ..................... 13
6.2 HEATER MOUNTING ............................... 13
7. GAS SUPPLY PIPING ..................................... 14
7.1 GAS PRESSURE ..................................... 14
Gas-fired Infrared Patio Heater for Outdoor Commercial / Residential Application,
and Gas-Fired Luminous (High Intensity) Infrared Heater for Commercial / Industrial
Non-Residential Application for either indoor or outdoor installation
TOPIC PAGE NUMBER
8. ELECTRICAL - BASIC REQUIREMENTS ......... 14
9. INSTALLATION PROCEDURES ....................... 15
10. LIGHTING INSTRUCTIONS ............................. 16
10.1 SHUT DOWN INSTRUCTIONS ............... 16
11. HEATER FINISH & APPEARANCE .................. 16
12. SERVICING GUIDE ......................................... 17
13. VENTILATION FOR INDOOR APP’S ............... 19
14. DIMENSIONS & CONFIGURATION ................. 20
15. MOUNTING KIT OPTIONS .............................. 21
16. ELECTRICAL REQUIREMENTS ...................... 24
16.1 CONTROL OPTIONS ............................... 24
17. 60 SEQUENCE OF OPERATION-FENWAL 35-
DSI .................................................................. 25
18. SPARK IGNITION CIRCUIT ............................ 26
19. WIRING DIAGRAM .......................................... 27
20. TROUBLESHOOTING GUIDE ......................... 30
21. COMMISSIONING REPORT ............................ 32
22. HIGH ALTITUDE INSTALLATION .................... 34
23. REPLACEMENT PARTS LIST.......... ........ .35 - 36
IMPORTANT Installer: Present this manual to the end user. Acquaint the
end user with Important Information: Cover & pages 4 to 10.
END USER: In particular you must be aware of Clearances to Combustible re-
quirements and the limitations of stacking or placing material near the heaters.
Inform your safety personnel and staff of this information.

Especificaciones del producto

Marca: Rinnai
Categoría: Calderas y calderas
Modelo: RSEP1S25N

¿Necesitas ayuda?

Si necesitas ayuda con Rinnai RSEP1S25N haz una pregunta a continuación y otros usuarios te responderán




Calderas y calderas Rinnai Manuales

Calderas y calderas Manuales

Últimos Calderas y calderas Manuales