Rinnai Ultima II REH-311FT Manual de Usario

Rinnai Calentador Ultima II REH-311FT

Lee a continuación 📖 el manual en español para Rinnai Ultima II REH-311FT (27 páginas) en la categoría Calentador. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/27

This appliance shall be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000 and AS/NZS 5601

• Local Regulations and Municipal Building Codes

This appliance must be installed, serviced and removed by an authorised person.

All Rinnai gasproducts

are A.G.A. certified.

ULTIMA II

Flued Space Heater

Operation / Installation Manual

MODEL REH-311FT(B) - Inbuilt

MODEL REH-311FT(C) - Console

Rinnai Australia i Ultima II Operation Manual

INSTALLATION REQUIREMENTS

This heater must be installed by an authorised person. The installation must conform to local regulations.

The installation must also comply with the instructions supplied by Rinnai.

Service and removal must be carried out by an authorised person.

The Rinnai REH311FT has been certified by the Australian Gas Association.

The AGA Certification Number is shown on the appliance dataplate.

No parts or functions should be modified or permanently removed from the heater.

Please keep these instructions in a safe place for future reference.

CERTIFICATION

Rinnai Australia 1 Ultima II Operation Manual

ABOUT YOUR ULTIMA II

DESIGN LAYOUT

Control panel

STANDBY/ON button

Burner filter

Air inlet louvre

Warm air discharge louvre

Thermistor grill cover

Dress guard

NAVIGATING THE CONTROL PANEL

STANDBY / ON button - used to operate and

stop the heater.

ON / Combustion indicator - when GREEN

appliance is in standby, when RED the burner

is operating and when flashing RED there is a

fault.

UP / DOWN button - used to adjust the SET

temperature, clock and timers and operate the

lock function.

TEMP display -

CURR - indicates the current room

temperature.

SET - indicates the desired room

temperature programmed by the user.

Clock display - displays current time.

MODE display - indicates which mode the

heater is operating in.

SET button - used to programme the heater

operation.

DAY display - displays the current day.

AM/PM indicator - indicates AM or PM of

clock or timer settings.

TIMER display - when the word ‘TIMER’ is

shown the display panel will be showing

current timer settings.

TIMER button - operates timer functions.

PROGRAM display - when the word

‘PROGRAM’ is shown the heater is in

programming mode.

WEEKDAY/WEEKEND display - Indicates

whether the weekday or weekend timers are

being programmed.

AM/PM display - indicates whether AM and/

or PM timer settings are being programmed.

OVERRIDE button - operates the manual

override function.

FILTER display - when shown the filter(s)

require cleaning.

LOCK display - when shown the lock function

is activated.

214

s u

i0:30

t i m e r

G A S E C O N

AM PM

A U T O O F F

20 18

1419

121324

2122

Especificaciones del producto

Marca:	Rinnai
Categoría:	Calentador
Modelo:	Ultima II REH-311FT
Ancho:	305 mm
Profundidad:	244 mm
Adaptador gráfico:	AST2500
red LAN:	Ja
Puerto(s) VGA (D-Sub):	1
Número de puertos Ethernet LAN (RJ-45):	2
Temperatura de almacenamiento:	-40 - 70 °C
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	2
Zócalo del procesador:	LGA 4094
Fabricante del procesador:	AMD
Memoria interna máxima:	256 GB
Humedad de almacenamiento:	20 - 90 procent
Canales de salida de audio:	- kanalen
Tipo de interfaz Ethernet:	10 Gigabit Ethernet
Tipo de ranura de memoria:	DIMM
Familia de adaptadores gráficos:	ASPEED
Interfaces de unidad de almacenamiento compatibles:	SATA III
Puertos seriales):	1
Componente para:	PC
voltaje de la memoria:	1.2 V
Adaptador de gráficos de memoria máxima:	256 MB
Procesadores compatibles:	AMD EPYC 7002, AMD EPYC 7003
Tipos de memoria soportados:	DDR4-SDRAM
Wifi.:	Nee
Temperatura de funcionamiento (TT):	10 - 35 °C
Familia de chipsets de placa base:	AMD
Factor de forma de la placa base:	ATX
Número de ranuras de memoria:	8
Velocidades de reloj de memoria admitidas:	2933,3200 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	32 Mbit
Versión ACPI:	6.3
Versión del BIOS de administración del sistema (SMBIOS):	3.3.0
Conector de alimentación ATX (24 pines):	Ja
Conexión del ventilador de la fuente de alimentación:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	2
Conector TPM:	Ja
Puerto IPMI LAN (RJ-45):	Ja