Robinhood RPB3CL6SS/WH Manual de Usario

Robinhood campana extractora RPB3CL6SS/WH

Lee a continuación 📖 el manual en español para Robinhood RPB3CL6SS/WH (10 páginas) en la categoría campana extractora. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/10

Description: ROBINHOOD POWERPACK RANGEHOOD

Model Numbers: RPB3CL6SS/WH, RPB3CL9SS/WH

Product may vary slightly from the picture

Issue 4

Pre-installation

Thank you for purchasing a quality Robinhood

rangehood. Robinhood has a high standard of

quality control and every rangehood is tested

and approved before it leaves the factory

Important:

Please read the entire instructions before installing the rangehood, always switch power off prior to installation.

All electrical work must be done by a registered electrician in accordance with local and national electrical codes

as applicable. For your safety, this product must be earthed.

The power socket must be accessible and enable the end user to isolate the rangehood from the power for the

purpose of internal cleaning or maintenance.

A power outlet should be within 1500mm of the power cord exit from the rangehood.

The canopy hood is not intended for use by persons (including children) with reduced physical, sensory or metal

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety

Children should be supervised to ensure that they do not play with the appliance.

There shall be adequate ventilation of the room when the rangehood is used at the same time as appliances

burning gas or other fuels.

There is a fire risk if cleaning is not carried out in accordance with the instructions. You must read the details

concerning the method and frequency of cleaning.

Do not flambé under the rangehood.

Exhaust air must not be discharged into an existing flue which is used for exhausting fumes from appliances

burning gas or other fuels.

The minimum distance between the hob surface and the lowest part of the rangehood is 600mm. This distance

shall be at least 650mm, if the rangehood is installed over a gas hob. If the instructions for the gas hob specify

a greater distance, this has to be taken into account.

Attention should be given to ensure that any applicable regulations concerning the discharge of exhaust air is

fulfilled. If re-circulating, ensure that the side outlet grilles on the upper chimney are not obstructed. Even a

partial obstruction will restrict the efficiency of the rangehood.

Stainless steel is very easily damaged during installation if abraded or knocked by tools. Protect the rangehood

with the cardboard box or plastic bag during installation.

Check the contents of the packaging, check all electrical functions of the canopy before installation.

Canopy is heavy. Please ensure adequate care when installing to prevent personal injury.

CAUTION: Accessible parts may become hot when used with cooking appliances

Pre-installation

•The Rangehood is designed for hood installations between 650 to 750mm above the cooking

surface*

•Any installation above 750mm will compromise the extraction performance.

•The air outlet from the motor requires 150mm round ducting which requires 170mm diameter hole

in the ceiling if ducting through the ceiling.

*Minimum height from the hob top surface to the underside

face of the rangehood

600mm electric hob

650mm gas hob

Notes:

If the instructions for the gas hob specify a greater distance,

this has to be taken into account.

Any installation above 750mm will compromise performance.

Especificaciones del producto

Marca:	Robinhood
Categoría:	campana extractora
Modelo:	RPB3CL6SS/WH
Color del producto:	Roestvrijstaal
Ancho:	860 mm
Profundidad:	500 mm
Peso del embalaje:	7400 g
Ancho del embalaje:	940 mm
Empaquetadura en profundidad:	560 mm
Altura del embalaje:	250 mm
Manual de usuario:	Ja
Ancho del compartimento de instalación:	840 mm
Profundidad del compartimento de instalación:	480 mm
tipo de fregadero:	Opbouwwasbak
Fregadero de forma:	Rechthoekig
Material del fregadero:	Roestvrijstaal
Número de lavabos:	2 kommen
Formar el primer fregadero:	Rechthoekig
Dimensiones del primer recipiente (WxL):	362.5 x 400 mm
Primero viene la profundidad:	185 mm
Forma el segundo fregadero:	Rechthoekig
Dimensiones del segundo recipiente (WxL):	362.5 x 400 mm
En segundo lugar viene la profundidad:	185 mm
Kraangat:	Ja
Número de orificios para grifos:	1
Encimera:	Nee
Grifo incluido:	Nee
Tamaño del fregadero:	3.5 "