Roland CY-18DR Manual de Usario

Roland No categorizado CY-18DR

Lee a continuación 📖 el manual en español para Roland CY-18DR (4 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT

NOTES” (p. 4). After reading, keep the document(s) where it will be available for

immediate reference.

Owner’s Manual

Making the Settings

Check the Included Items

After opening the package, check that all of the included items are

present. If anything is missing, contact your dealer.

CY-18DR

Wing nut

Felt washer

Stopper

Connection cable

Cable tie

Owner’s manual (this document)

CY-18DR Components

Bow

Edge

FUNC button (*1)

DIGITAL TRIGGER OUT connector

(*1) This button will be used in the event of a future upgrade.

* It is not normally used.

Mounting on the Stand

1. Use a commercially available drum key to tighten the

stopper bolt.

The stopper keeps the V-Cymbal from turning, preventing the

tangling of cables on the stand.

Stopper

Attach the stopper

so that the bolt is on

the right-hand side,

from the performer’s

perspective.

Bolt

Tighten the bolt

with a commercially

available drum key.

2. Attach the V-Cymbal, while positioning it so the Roland

logo is located on the side opposite the performer.

Wing nut

Felt washer

Position the Roland logo

on the opposite side of the

playing area

3. Tighten the included felt washer and the wing nut to

obtain the desired movement.

* Use the included felt washer and wing nut.

* Double sounding may occur if the wing nut is loose.

4. Insert the plug of the connection cable into the CY-18DR’s

DIGITAL TRIGGER OUT connector.

Connection cable

Protector

Use the protector to lock the

connection.

5. Secure the cables in place with the cable tie.

Leave some slack in the cables to ensure they are not pulled by the

movement of the V-Cymbal pads.

Be sure to make this

small plastic hook

visible from you.

Wind a cable tie around a cable.

Wind a cable tie around the pipe and

tighten it in order to not to slip.

Insert the small

plastic hook to a

hole to secure the

cable to the cymbal arm.

Secure the cable in place

with the cable tie

k in the cable

* Take care to ensure that the cables do not touch the V-Cymbal

pads and/ or the stand. A cable touching a V-Cymbal pad or a

stand may cause double sounding or other incorrect operation.

Main Specications

Roland CY-18DR: V-Cymbal Digital Ride

Size 18 inches

Triggers 3 (Bow/Bell/Edge)

Connector DIGITAL TRIGGER OUT connector

(compatible with Roland drum sound module equipped with DIGITAL TRIGGER IN port)

Power Supply DIGITAL TRIGGER bus power (DC 5 V)

Current draw 90 mA

Dimensions 470 (W) x 470 (D) x 55 (H) mm

18-9/16 (W) x 18-9/16 (D) x 2-3/16 (H) inches

Weight 2.1 kg / 4 lbs 11 oz

Accessories Owner’s manual, Wing nut, Felt washer, Stopper, Connection cable, Cable tie

Options

(sold separately)

Cymbal mount (MDY series)

Cymbal parts set (CYM-10)

* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the Roland

website.

Connecting to the Drum Sound Module

Use a Roland drum sound module that supports digital

connections.

1. Insert the plug of the connection cable into the drum

sound module’s DIGITAL TRIGGER IN port.

2. On the drum sound module, make settings for using the

CY-18DR.

* For details, refer to the owner’s manual of your drum sound

module.

Recommended settings for the trigger parameters

The rst time you connect the CY-18DR to your drum sound

module, the recommended values are assigned to the trigger

parameters.

You may need to adjust the trigger parameters depending on how

you’ve mounted the CY-18DR and the location at which you’ve

installed it.

For details on editing refer to the owner’s manual of your drum

sound module.

Playing Method

The response to various playing methods depends on the drum

sound module.

For details, refer to the owner’s manual of your drum sound module.

NOTE

5Use only wooden or plastic sticks. Using a carbon or metal

stick may cause the sensor to malfunction.

5Use nylon brushes. Using metal brushes may cause the

sensor to malfunction, and may scratch the pad.

Playing method Explanation

Bow shot Nuance changes depending

on the strike location This is the most common playing

method, playing the middle area of the

cymbal. It corresponds to the sound

of the “head-side” of the connected

trigger input.

Edge shot

Edge sensor

This playing method involves striking

the edge with the shoulder of the stick.

When played as shown in the gure,

the rim sound of the connected input

is triggered.

Bell shot

This is the technique of striking the

bell.

Striking the bell area will produce the

rim sound of the connected trigger

input.

Strike using the shoulder of the stick.

Choke play

Edge sensor

Sensor

If you use your hand to choke (grasp)

the edge sensor after striking the

cymbal, the sound stops.

In addition, placing your hand on the

sensor will also stop the sound (mute).

If you strike the cymbal in a choked or

mute state, it rings a shorter time.

Especificaciones del producto

Marca:	Roland
Categoría:	No categorizado
Modelo:	CY-18DR
Color del producto:	Limoen
Indicadores LED:	Ja
Capacidad del acumulador/batería:	170 mAh
Bluetooth:	Ja
Tiempo de reproducción de audio continuo:	10 uur
Versión Bluetooth:	4.0
Perfiles Bluetooth:	A2DP, AVRCP, HFP, HSP
Tecnología de conectividad:	Draadloos
Banda de frecuencia:	2.4 - 2.48 GHz
Silenciar micrófono:	Ja
Número soportado de baterías/baterías:	1
Control del volumen:	Digitaal
Método de uso:	In-ear
Tipo de auricular:	Stereofonisch
Colocar los auriculares de los altavoces.:	Intraauraal
Conector de 3,5 mm:	Nee
Rango de conexión:	10 m
Batería/Tiempo de carga de la batería:	2 uur
conexión USB:	Ja
Auriculares:	Ja
Conector de 2,5 mm:	Nee
Número de micrófonos:	1
Conector USB:	Micro-USB
Tipo-producto:	Headset
Tecnología de batería:	Lithium-Polymeer (LiPo)
Tipo de Batería:	Ingebouwde accu
Batería recargable:	Ja