Roland PD-128S Manual de Usario

Roland No categorizado PD-128S

Lee a continuación 📖 el manual en español para Roland PD-128S (13 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/13
V-Pad
*5100025644-02*
2
USING THE UNIT SAFELY
WARNING
Do not disassemble or modify by yourself
Do not open or perform any
internal modications on the
unit. (The only exception would
be where this manual provides
specic instructions which should be
followed in order to put in place user-
installable options; see p. 8.)
Do not repair or replace parts by yourself
Do not attempt to repair the unit,
or replace parts within it (except
when this manual provides
specic instructions directing you
to do so). Refer all servicing to your retailer,
the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the
“Information” page.
Do not use or store in the following types of
locations
• Subject to temperature extremes
(e.g., direct sunlight in an
enclosed vehicle, near a heating
duct, on top of heat-generating
equipment); or are
• Damp (e.g., baths, washrooms,
on wet oors); or are
• Exposed to steam or smoke;
or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness.
Use only stand that is recommended
Mount this unit on a stand
recommended by Roland (MDS
series) or on a commercially
available snare stand that meets
the requirements listed on page 5.
WARNING
Do not place in an unstable location
If you mount this unit on a stand
(one from the MDS series or a
commercially available snare
stand), do not place the stand on a
surface that is unstable or is inclined.
Place it on a surface that is level and sure to
remain stable.
Even if you are using this unit by itself, you
should likewise place it on a surface that is
level and sure to remain stable.
Don’t allow foreign objects or liquids to enter
unit; never place containers with liquid on unit
Do not place containers
containing liquid on this product.
Never allow foreign objects (e.g.,
ammable objects, coins, wires) or
liquids to enter this product. Doing
so may cause short circuits, faulty
operation, or other malfunctions.
Adults must provide supervision in places
where children are present
When using the unit in locations
where children are present,
be careful so no mishandling
of the unit can take place. An
adult should always be on hand to provide
supervision and guidance.
Do not drop or subject to strong impact
Protect the unit from strong
impact.
(Do not drop it!)
CAUTION
Manage cables for safety
Try to prevent cords and cables
from becoming entangled. Also,
all cords and cables should be
placed so they are out of the
reach of children.
Avoid climbing on top of the unit, or placing
heavy objects on it
Never climb on top of, nor place
heavy objects on the unit.
Disconnect the sound module before moving
the unit
Before you move the unit,
disconnect all external equipment.
Keep small items out of the reach of children
To prevent accidental ingestion of
the parts listed below, always keep
them out of the reach of small
children.
• Removable Parts
Tuning bolts, washers, clips, covering
fastening screws
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING
3
IMPORTANT NOTES
Placement
• Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave
it inside an enclosed vehicle, or otherwise
subject it to temperature extremes.
Excessive heat can deform or discolor the
unit.
• When moved from one location to
another where the temperature and/or
humidity is very dierent, water droplets
(condensation) may form inside the unit.
Damage or malfunction may result if you
attempt to use the unit in this condition.
Therefore, before using the unit, you must
allow it to stand for several hours, until the
condensation has completely evaporated.
• Do not allow rubber, vinyl, or similar
materials to remain on this unit for long
periods of time. Such objects can discolor
or otherwise harmfully aect the nish.
• Do not put anything that contains water on
this unit. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans,
etc., near the unit. Swiftly wipe away any
liquid that spills on the unit using a dry,
soft cloth.
Maintenance
• For everyday cleaning wipe the unit with a
soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be
sure to wipe the unit thoroughly with a soft,
dry cloth.
• Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility
of discoloration and/or deformation.
Additional Precautions
• Use a reasonable amount of care when
using the unit’s buttons, sliders, or other
controls; and when using its jacks and
connectors. Rough handling can lead to
malfunctions.
• When disconnecting all cables, grasp the
connector itself—never pull on the cable.
This way you will avoid causing shorts, or
damage to the cable’s internal elements.
• This instrument is designed to minimize
the extraneous sounds produced when it’s
played. However, since sound vibrations
can be transmitted through oors and walls
to a greater degree than expected, take
care not to allow these sounds to become a
nuisance others nearby.
• When you need to transport the unit,
package it in the box (including padding)
that it came in, if possible. Otherwise, you
will need to use equivalent packaging
materials.
• The snare stand is supported by means
of a tripod. When installing the drum set,
make sure the legs of the tripod are opened
wide enough to keep the equipment from
falling over.
• The rubber portion is treated with a
preservative to maintain its performance.
With the passage of time, this preservative
may appear on the surface as a white
stain, or reveal how the pads were struck
during product testing. This does not aect
the performance or functionality of the
product, and you may continue using it
with condence.
• Do not insert your hands or ngers in the
locations marked by the arrows. Otherwise,
you risk injury and possible damage to this
unit’s parts.
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Roland, V-Drums are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 2) and “IMPORTANT NOTES” (p. 3). These sections
provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a
good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and
kept on hand as a convenient reference.

Especificaciones del producto

Marca: Roland
Categoría: No categorizado
Modelo: PD-128S

¿Necesitas ayuda?

Si necesitas ayuda con Roland PD-128S haz una pregunta a continuación y otros usuarios te responderán


No categorizado Roland Manuales

Roland

Roland SD-20 Manual de Usario

16 Octubre 2024
Roland

Roland FR-18 Diatonic Manual de Usario

15 Octubre 2024
Roland

Roland RD-300GX Manual de Usario

13 Octubre 2024
Roland

Roland Fantom FA-76 Manual de Usario

12 Octubre 2024
Roland

Roland M-1000 Manual de Usario

12 Octubre 2024
Roland

Roland KD-200 Manual de Usario

7 Octubre 2024
Roland

Roland DM-10 Manual de Usario

5 Octubre 2024
Roland

Roland RD-88 EX Manual de Usario

26 Septiembre 2024
Roland

Roland KT-10 Manual de Usario

23 Septiembre 2024
Roland

Roland VH-14D Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024