Rowenta Professional DM8909 Manual de Usario

Rowenta Hierro Professional DM8909

Lee a continuación 📖 el manual en español para Rowenta Professional DM8909 (32 páginas) en la categoría Hierro. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/32

min

Cle

4 5

Cle

30 sec.

8 min.

30 sec.

7 8

GE F H

C/D

ENGLISH

■ For appliance description see diagram on page 3:

A Spray jet

B Water filling inlet with cover

C Variable steam control

D Self-clean button

E Spray button

F Shot of steam button

G Pilot light

H Automatic switch-off indicator light

(depending on model)

I Temperature dial

J Flexible cord protector

K Mains supply cord

L Transparent water tank

M Extremely scratch-resistant

soleplate

N Maximum water level indicator

SAFETY INSTRUCTIONS:

PThe appliance complies with EU directives 72/23/EEC and 89/336/EEC.

EThe appliance may only be connected to alternating current as specified

on the rating plate.

EIf your home is fitted with a differential current switch, please ensure that

it is sensitive to pulse trains.

U.K. ONLY

SAFETY POINTS FOR REWIREABLE OR MOULDED PLUG:

EThe mains lead is fitted with a BS 1363 13A plug.

EIf the plug supplied with the product is not suitable for your socket outlet,

then it must be removed (cut off, if it is a moulded-on plug) and a suitable

3 pin plug fitted in accordance with the instructions given below.

IF YOU ARE IN ANY DOUBT, PLEASE CONTACT A QUALIFIED

ELECTRICIAN.

WARNING: Dispose of a plug that has been cut from the power supply cord,

as such a plug is hazardous if inserted in a live 13 amp socket outlet else-

where in the house.

How to connect the cord to a U.K. plug:

IMPORTANT!

The wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow Earth

Blue Neutral

Brown Live

Please read the instructions given below

before connecting the cord to a plug.

If you are in any doubt please consult a qualified

electrician.

As the colours of the wires in the mains lead

of this coffee maker may not correspond with

the coloured markings identifying the terminals

in your plug, proceed as follows:

EThe wire that is coloured GREEN & YELLOW must be connected to the

terminal in the plug which is marked with the letter E, or the earth

Symbol , or coloured GREEN or GREEN & YELLOW.

EThe wire that is coloured BROWN must be connected to the terminal

which is marked with the letter L or coloured RED.

EThe wire that is coloured BLUE must be connected to the terminal which

is marked with the letter N or coloured BLACK.

EThis appliance requires a 13 amp fuse.

EShould the fuse need to be replaced an ASTA marked fuse, approved to

BS 1362, of the same rating must be used.

EAlways replace the fuse cover after fitting a fuse. The plug must NOT be

used if the cover is omitted or lost until a replacement is obtained - make

certain that only the correct fuse cover is used and fitted.

EFor plugs with a detachable fuse cover, the replacement must be the same

as the colour insert in the base of the plug, or as directed by the em-

bossed working on the base of the plug.

EIf the detachable fuse cover is lost, a replacement may be purchased from

a Rowenta Service Centre (see enclosed Service Information leaflet).

EInformation for supply may also be obtained from the plug manufacturer.

Replenishing water

■ Unplug the iron.

■ Move the variable steam control fully to the left (Position “min“). Add water

■ Plug in the iron again and wait until the warning light goes off. Return the

steam control slide to the desired steam volume.

SELECTING THE IRONING TEMPERATURE3

Set the temperature control on the iron using the international dot symbols

(control knob/garment label) or by type of fabric:

Laundry Fabric Temperature

label regulator

synthetics

●

e.g. viscose,

polyester

silk, ● ●

wool

cotton, ● ● ●

linen

■ Before ironing, sort laundry by type of fabric.

■ For delicate fabrics we recommend testing the ironing temperature on an

invisible spot (inside of the hem) before starting to iron.

Connect the iron to the mains electricity supply

Plug in the iron. The warning light goes on and indicates that the iron is heating

up. As soon as the light goes out, the set temperature has been reached and the

iron is ready for use.

ADJUSTABLE STEAM FUNCTION4

Set the variable steam control to required steam volume. Steam can only be

produced when the thermostat is aligned to or max. (red zone). Allow● ● ●

iron to heat up (pilot light goes off) before activating the variable steam control.

Anti-drip system (depending on model)

The anti-drip system reduces the steam volume when the set temperature is too

low. This helps prevent any water dripping from the soleplate.

Iron ready for steam ironing

Steam generation starts when the iron is held horizontally

Steam stop

Steam generation can be interrupted:

■ by setting the iron on its heel

■ by pushing the steam control slide fully to the left.

5 SPRAY FUNCTION

Laundry can be spray dampened as soon as there is water in the tank.

■ Press spray button down:

slowly = spray shot

fast and strongly = spray mist

SHOT OF STEAM6

While ironing, firmly press down the shot of steam button. A strong shot of steam

penetrates deeply into the fabric. Allow an interval of at least 4 seconds between

steam shots.

Especificaciones del producto

Marca:	Rowenta
Categoría:	Hierro
Modelo:	Professional DM8909
Peso.:	400 g
Ancho:	76.2 mm
Profundidad:	127 mm
Altura:	35 mm
Certificados de sostenibilidad:	RoHS
Cantidad por paquete:	36 stuk(s)
Voltaje de entrada:	90 - 264 V
Potencia de salida:	300 W
Abarcando:	48 V