Samsung AR12KSSSTWKXJO Manual de Usario

Samsung No categorizado AR12KSSSTWKXJO

Lee a continuación 📖 el manual en español para Samsung AR12KSSSTWKXJO (60 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/60
AR HSFS Series ✴✴ ✴✴
AR JSSS Series✴✴ ✴✴
AR KSSS Series✴✴ ✴✴
Air Conditioner
user & installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
DB68-04955A-02
English-2
Features of your new air conditioner
2-step cooling
2-step cooling function will quickly cool the room to reach the desired temperature and then it
will adjust the fan speed and air flow direction automatically to help you stay comfortable and
refreshing.
Fast cooling/heating
If you want the strong and cool/warm air, just select Fast function! It will get you the strongest air!
Comfort cooling/heating
If you want the comfortable and refreshing air, Comfort function will spread the cool/warm air
indirectly to you, so that you can stay comfortable.
Single User
Use Single User function when you are alone at home. Single User function will minimize the
energy consumption with inverter technology and reduce your electricity bill by adjusting the
maximum operating capacity of the compressor.
Easy Filter
There is no grille to remove before separating the lter from the air conditioner! Therefore, lter can
be cleaned easily, more frequently! Frequent lter cleaning will prevent dust from entering into the
product or accumulating on the lter.
Smart Install
When the installation is done, your product will examine itself through trial operation to check if it
was installed properly.
Easy Installation
It’s so easy to install! You can easily hang the product on the wall and connect the pipes and wires
by opening the cover on the bottom of the product. Now you won’t have to tilt the product to
connect the pipe and the wires!
function
function will allow you to have deep, good night’s sleep by adjusting the
temperature, fan speed and air ow direction.
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government oce, for details of where
and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
English-3
Contents
Preparation
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Checking before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Basic function
Checking the name of the parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Checking the remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Basic function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Adjusting the air ow direction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Timer
Setting the On/O timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Options
2-Step cooling function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Using the Fast function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using the Comfort function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using the Single user function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Using the Quiet function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Using the Virus Doctor fuction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Settings
Using the Auto clean function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Setting the Beep sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Others
Cleaning the air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Maintaining the air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Installation
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Choosing the installation location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Fixing the installation plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Disassembling/Assembling the Cover panel for indoor unit installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Connecting the assembly cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Installing and connecting the assembly pipe of the indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Evacuating the indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Cutting or extending the pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Installing and connecting the drain hose of the indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Changing direction of the drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Installing and connecting the drain hose of the outdoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Evacuating the connected pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Performing the gas leak tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Fixing the indoor unit in place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Fixing the outdoor unit in place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Smart Install mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Final check and trial operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Pump down procedure (when removing the product) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
How to connect your extended power cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
English-4
Safety precautions
Before using your new air conditioner, please read this manual thoroughly to ensure
that you know how to safely and eciently operate the extensive features and
functions of your new appliance.
Because the following operating instructions cover various models, the
characteristics of your air conditioner may dier slightly from those described in this
manual. If you have any questions, call your nearest contact center or nd help and
information online at www.samsung.com.
Important safety symbols and precautions:
WARNING
Hazards or unsafe practices that may result in severe
personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor
personal injury or property damage.
Follow directions. Cut-o the power supply.
Do NOT attempt. Do NOT disassemble.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
WARNING
Use the power line with the power specications of the product or higher
and use the power line for this appliance only. In addition, do not use an
extension line.
Extending the power line may result in electric shock or fire.
Do not use an electric transformer. It may result in electric shock or fire.
If the voltage/frequency/rated current condition is different, it may cause
fire.
The installation of this appliance must be performed by a qualied
technician or service company.
Failing to do so may result in electric shock, fire, explosion, problems with the
product, or injury and may also void warranty on the installed product.
Install a Isolation Switch next to the Air Conditioner (but not on the panels
of the Air Conditioner)and circuit breaker dedicated to the air conditioner.
Failing to do so may result in electric shock or fire.
Fix the outdoor unitrmly so that the electric part of the outdoor unit is not
exposed.
Failing to do so may result in electric shock, fire, explosion, problems with the
product.
English-5
PREPARATION01
Do not install this appliance near a heater, inammable material. Do
not install this appliance in a humid, oily or dusty location, in a location
exposed to direct sunlight and water (rain drops). Do not install this
appliance in a location where gas may leak.
This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall
where it could fall.
If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a
gas pipe, plastic water pipe, or telephone line.
Failure to do so may result in electric shock, fire, and explosion.
Make sure to use a socket-outlet with ground.
FOR INSTALLATION
CAUTION
Install your appliance on a level and hard oor that can support its weight.
Failing to do so may result in abnormal vibrations, noise, or problems with the
product.
Install the draining hose properly so that water is drained correctly.
Failing to do so may result in water overflowing and property damage. Avoid
adding drain to waste pipes as odours may arise in the future.
When installing the outdoor unit, make sure to connect the draining hose
so that draining is performed correctly.
The water generated during the heating operation by the outdoor unit may
overflow and result in property damage.
In particular, in winter, if a block of ice falls, it may result in injury, death or
property damage.
FOR POWER SUPPLY
WARNING
When the circuit breaker is damaged, contact your nearest service center.
Do not pull or excessively bend the power line. Do not twist or tie the
power line. Do not hook the power line over a metal object, place a heavy
object on the power line, insert the power line between objects, or push
the power line into the space behind the appliance.
This may result in electric shock or fire.
English-6
Safety precautions
FOR POWER SUPPLY
CAUTION
When not using the air conditioner for a long period of time or during a
thunder/lightning storm, cut the power at the circuit breaker.
Failing to do so may result in electric shock or fire.
FOR USING
WARNING
If the appliance is ooded, please contact your nearest service center.
Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, cut-
o the power supply immediately and contact the nearest service center.
Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate
immediately without touching the power line. Do not touch the appliance
or power line.
Do not use a ventilating fan.
A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
Failing to do so may result in problems with the product, water leakage,
electric shock, or fire.
A delivery service for the product is not provided. If you reinstall the product in
another location, additional construction expenses and an installation fee will
be charged.
Especially, when you wish to install the product in an unusual location such as
in an industrial area or near the seaside where it is exposed to the salt in the air,
please contact your nearest service center.
Do not touch the circuit breaker with wet hands.
This may result in electric shock.
Do not turn the air conditioner o with the circuit breaker while it is
operating.
Turning the air conditioner off and then on again with the circuit breaker may
cause a spark and result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well
out of the reach of children, as packaging materials can be dangerous to
children.
If a child places a bag over its head, it may result in suffocation.
English-7
PREPARATION01
Do not insert your ngers or foreign substances into the outlet when the air
conditioner is operating.
Take special care that children do not injure themselves by inserting their
fingers into the product.
Do not touch the airow blade with your hands or ngers during the
heating operation.
This may result in electric shock or burns.
Do not insert your ngers or foreign substances into the air inlet/outlet of
the air conditioner.
Take special care that children do not injure themselves by inserting their
fingers into the product.
Do not strike or pull the air conditioner with excessive force.
This may result in fire, injury, or problems with the product.
FOR USING
WARNING
Do not place an object near the outdoor unit that allows children to climb
onto the machine.
This may result in children seriously injuring themselves.
Do not use this air conditioner for long periods of time in badly ventilated
locations or near inrm people.
Since this may be dangerous due to a lack of oxygen, Open a window at least
once an hour.
If any foreign substance such as water has entered the appliance, cut-o
the power supply and contact the nearest service center.
Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
Do not use any fuse (such as cooper, steel wire, etc.)other than the standard
fuse.
Failing to do so may result in electric shock, fire, problems with the product, or
injury.
English-8
Safety precautions
FOR USING
CAUTION
Do not place objects or devices under the indoor unit.
Water dripping from the indoor unit may result inre or property damage.
(example electrical appliances)
Check that the installation frame of the outdoor unit is not broken at least
once a year.
Failing to do so may result in injury, death or property damage.
Max current is measured according to IEC standard for safety and current is
measured according to ISO standard for energy eciency.
Do not stand on top of the appliance or place objects (such as laundry,
lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on
the appliance.
This may result in electric shock, re, problems with the product, or injury.
Do not operate the appliance with wet hands.
This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the
appliance.
As well as being harmful to humans, it may also result in electric shock, re or
problems with the product.
Do not drink the water from the air conditioner.
The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not
disassemble the remote controller.
Do not touch the pipes connected with the product.
This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food,
animals, plants or cosmetics, or for any other unusual purposes.
This may result in property damage.
Avoid directly exposing humans, animals or plants from the air ow from
the air conditioner for long periods of time.
This may result in harm to humans, animals or plants.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 8 12/17/2015 9:54:44 AM
English-9
PREPARATION01
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
FOR CLEANING
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use
benzene, thinner or alcohol to clean the appliance.
This may result in discoloration, deformation, damage, electric shock or re.
Before cleaning or performing maintenance, cut-o the power supply and
wait until the fan stops.
Failing to do so may result in electric shock or re.
FOR CLEANING
CAUTION
Take care when cleaning the surface of the heat exchanger of the outdoor
unit since it has sharp edges.
This should be done by a qualied technician please contact your installer or
service center.
Do not clean the inside of the air conditioner by yourself.
For cleaning inside the appliance, contact your nearest service center.
When cleaning the internal lter, refer to the descriptions in the ‘Cleaning the
air conditioner’ section.
Failure to do may result in damage, electric shock orre.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 9 12/17/2015 9:54:44 AM
English-10
Checking before use
Operation ranges
The table below indicates the temperature and humidity ranges the air
conditioner can be operated within. Refer to the table for ecient use.
Smart install
Through Smart install function, installer can check if the installation was done properly.
If the installation was not done properly, error indicator will turn on the indoor unit display.
Therefore user will know if the installation was done properly or not.
Maintaining your air conditioner
If the air conditioner operates in cooling mode for long period of time in high humidity area, dew may be formed.
If the outdoor temperature goes down to -5 °C, heating capacity may decrease as much as 60 %~70 % of specied capacity
according to the using conditions.
Mode Indoor temperature Outdoor temperature Indoor humidity
Cooling 16 ˚C~ -10 ˚C~46 ˚C Relative humidity 80% or less32 ˚C
Heating 27 ˚C or less -15 ˚C~24 ˚C -
Dry 18 ˚C~32 ˚C -10 ˚C~46 ˚C -
Internal protections via the unit control system
This internal protection operates if an internal fault occurs in the air conditioner.
Type Description
Against cold air The internal fan will be o to prevent cold air when the heat pump is heating.
Defrost cycle
The internal fan will be o to defrost ice when the heat pump is heating.
Vertical air ow blade will be closed during defrost cycle and it will open again during
heating operation after defrost cycle.
Protect compressor The air conditioner does not start operating immediately to help protect the compressor
of the outdoor unit after it has been started.
• IftheheatpumpisoperatinginHeatmode,Defrostcycleisactuatedtohelpremovefrostfromanoutdoorunit
that may have deposited at low temperatures.
The internal fan is switched o automatically and restarted only after the defrost cycle is completed.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 10 12/17/2015 9:54:44 AM
English-11
BASIC FUNCTION02
Main parts
Your air conditioner may slightly look dierent from illustration shown below depending on your model.
Checking the name of the parts
Airlter
Airow blade
(up and down) Airow blade
(left and right)
Air intake
Display
Power button/
Remote controller receiver
Room
temperature
sensor
Virus Doctor indicator
Timer/Auto clean indicator
Operation indicator
Virus Doctor
(AR**JSSS**, AR**KSSS**)
(AR**JSSS** )
(AR**KSSS** )
Single user indicator
Timer/Auto clean indicator
Operation indicator
(AR**HSFS** )
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 11 12/17/2015 9:54:46 AM
English-12
Checking the remote controller
Remote controller buttons
• Pointtheremotecontrollertowardstheremotecontrollerreceiveroftheindoorunit.
• Whenyouproperlypressthebuttonontheremotecontroller,youwillhearbeepsoundfromtheindoorunitandatransmit
indicator( ) appears on the remote controller display.
Power
Turn on/o the air
conditioner
Temp + –
Increase/Decrease the
temperature by 1 ˚C.
Options
Select options during operation
Timer
Select Timer option
Directional < >
Move through the Timer,
Options or Settings menu to
make a selection
Vertical air swing
Activate/Deactivate vertical air ow
blade movement automatically
Single User
Turn on/o the Single User function
which reduces energy usage
Settings
Select settings
SET
Set/Cancel the selected option or
setting
Mode
Set one of the 5 operating modes
Fan
Adjust the fan speed
• In case you wish to cancel the options or settings that you have just set, press the or button again, Options Settings
then the most recently selected item will blink and you may simply cancel it by pressing the SET button while
selected item is blinking.
English-13
BASIC FUNCTION02
• Makesurethatthewaterdoesnotgettotheremotecontroller.
• The following function are displayed on the remote controller display but not supported in this model.
- Virus Doctor( )(AR**HSFS** )/ d'light Cool / Usage / Filter Reset / Display
• Whenturningoandturningontheremotecontroller,theTimer, Options and Settings set before turning o
the remote controller are cancelled. However, the fan direction does not change.
Remote controller display
Low Battery warning
When the battery is exhausted, ( ) will be displayed in the
remote controller display. When the icon appears, change
the batteries. The remote controller requires two 1.5 V AAA
type batteries.
Storing the remote controller
When you do not use the remote controller for long time,
remove the batteries from the remote controller and store it.
Inserting the batteries
1. Push the lever as arrow indicates on the rear side of the
remote controller and pull up.
2. Insert two AAA batteries.
Check and match the “+” and “-” signs accordingly. Make sure
you have inserted the batteries in correct position.
3. Close the cover by place it back to its original position.
You should hear click sound when the cover is locked properly.
• Thesignalmaynotbereceivedproperlyifelectronicourescentlampssuchasinverterourescentlampsare
operating in the same space.
• Ifotherelectricalproductsoperatebytheremotecontroller,callyournearestcontactcenter.
Operation mode
indicator
Set temperature/ Time (for
Timer option) indicator
good'sleep indicator
Options indicator
Transmit indicator
Low battery indicator
Fan speed indicator
Vertical air swing indicator
Settings indicator
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through
your local, free battery return system.
Correct disposal of batteries in this product
English-14
Basic function
Basic operation is an operation mode that can be selected by pressing the button. Mode
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room
temperature.
Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot
season.
• If current outside temperature is much higher than the selected indoor temperature, it may take time to bring the inner
temperature to the desired coolness.
• Quiet mode makes the noise quieter during the operation of the indoor unit in the Cool mode.
Dry
The air conditioner in Dry mode acts like a dehumidier by removing moisture from the indoor air.
Dry mode makes the air feel refreshing in a humid climate.
To activate the Dry mode, set temperature on the remote controller should be lower than indoor room temperature.
Fan
Fan mode can be selected to circulate your room. Fan mode will be helpful to refresh the stale air in your room.
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the cold of winter.
• Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is
warming up.
• Quiet mode makes the noise quieter during the operation of the indoor unit in the Heat mode.
• Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when
outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats
insuciently.
• OnlyHeatingmodelshavethisfunction:AR✴✴HS/JS/KS series.✴✴
English-15
BASIC FUNCTION02
Basic function
Press the button to turn on the air conditioner.
Press the button to set the operating mode.
• EachtimeyoupresstheMode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat.
Press the button to adjust the temperature.
Auto You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.
Cool You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.
Dry You can adjust the set temperature by 1 °C within the range of 18 °C~30 °C.
Fan Temperature adjustment is not possible.
Heat You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.
Press the button to set the desired fan speed.
Auto
(Auto)
Cool
(Auto), (Low), (Med), (High), (Turbo)
Dry
(Auto)
Fan
(Low), (Med), (High), (Turbo)
Heat
(Auto), (Low), (Med), (High), (Turbo)
• Drymodeisonlyavailableinthecoolingmode.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 15 12/17/2015 9:54:49 AM
English-16
Horizontal air ow
Move the blade pin lever left or right to keep the airow direction in a constant
position you prefer.
• Toavoidtheriskofpersonalinjuries,adjustingthehorizontalair
ow direction should only be done when the unit is turned o
completely. There is a potential risk of personal injury when the unit
is mishandled.
Adjusting the air ow direction
This function will allow you to adjust the air ow direction vertically.
Press the button to make air ow blades vertically.
Remote controller display
To keep the air ow direction in a constant direction, press the button again.
The air ow blade(s) will stop the movement.
If you adjust the vertical air ow blade manually, it may not close completely when
you turn o the air conditioner.
Vertical air ow
• Adjustingtheairowdirectionisnotavailableingood'sleepmodewhileitisin
cool mode.
• However,youcanadjusttheairowdirectioningood'sleepmodewhileitisin
heat mode.
English-17
TIMER03
Setting the On/O timer
Setting the On timer
When the air conditioner is o;
Remote controller display
1. Press the Timer button to select (On).
- (On) indicator will keep blinking and you can set the time.
2. Press the , button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3hours and hour unit from 3~24 hours.
- Time can be set from minimum 30 minutes to maximum 24 hours.
3. Press the SET button to complete the On timer setting.
- (On) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator (
)
will be displayed on the indoor
unit display.
- On timer setting will be cancelled if you don't press the button within SET
10seconds after setting the time. Therefore, check for the (On) indicator on the
remote controller display and the Timer indicator (
)
on the indoor unit display.
Cancel Press the Timer button select (On)   press the or button 
set the timer to press the button.SET
Additional options available in On/O timer mode(When the remote controller is on)
You can select from Auto/Cool/Dry/Fan /Heat.
You can adjust the temperature in Auto/Cool/Dry /Heat mode .
You can adjust the fan speed in Cool/Fan/Heat mode.
• When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On)
indicator will remain on the remote controller display thereafter.
• If you press the Power button on the indoor unit after setting the On timer from the remote controller,
Timer indicator on the indoor unit display will disappear and the On timer will be cancelled. Even though the
On timer is cancelled, (On) indicator on the remote controller will remain displayed.
• When the On timer is set while the air conditioner is o, Timer indicator (
) will be displayed and remain on
until the On timer turns on.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 17 12/17/2015 9:54:55 AM
English-18
Setting the O timer
When the air conditioner is on;
Remote controller display
1. Press the Timer button to select (O).
- (O) indicator will keep blinking and you can set the time.
2. Press the , button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3hours and hour unit from 3~24 hours.
- Time can be set from minimum 30 minutes to maximum 24 hours.
3. Press the SET button to complete the O timer setting.
- (O) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator (
)
will be displayed on the indoor
unit display.
- O timer setting will be cancelled if you don't press the button within SET
10seconds after setting the time. Therefore, check for the (O) indicator on the
remote controller display and the Timer indicator (
)
on the indoor unit display.
Cancel Press the Timer button select (O)   press the or button 
set the timer to press the button.SET
• O timer may not work depending on the On/O status of the indoor unit
and the On/O status of the indicator on the remote controller display.
• OnlythelatestsettingtimerwillbeappliedbetweentheOnTimer/O
Timer and Otimer functions.
• Aftersettingthetimer,thesettimewillbedisplayedfor3secondsbefore
it disappears.
• IfTimerfunctionisusedinHeatingmode,Airconditionerworkinto
former mode. (AR**HV/JV/KV****series)
Combining On Timer and OTimer
When the air conditioner is o When the air conditioner is on
When set time on On timer is shorter than O timer
Ex) On timer : 3 hours, O timer : 5 hours
- The air conditioner will turn on after 3 hours from the
moment you have set the timer and the air conditioner will
remain on for 2 hours and then turn o automatically.
When set time on On timer is longer than O timer
Ex) On timer : 3 hours, O timer : 1 hour
- The air conditioner will turn o after 1 hour from the
moment you have set the timer and turn on after 2 hours
from the moment it was turned o.
• Set time for the On timer and the O timer should be dierent from each other.
• When the On timer and the O timer is set, setting can be cancelled by pressing the Power button.
Setting the On/O timer
English-19
TIMER03
mode
For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1. Press the Timer button to select ( ).
- ( ) indicator will keep blinking and you can set the time.
2. Press the , button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3hours and hour unit from 3~12 hours.
- Time can be set from minimum 30 minutes to maximum 12 hours.
- Default time setting for the mode is 8 hours.
3. Press the SET button to complete the mode setting.
- ( ) indicator and the set time of the mode will be displayed on
the remote controller display.
- Timer indicator (
)
will be displayed on the indoor unit display.
- mode setting will be cancelled if you don't press the button within SET
10 seconds after setting the time. Therefore, check for the () indicator on the
remote controller display and the Timer indicator () on the indoor unit display.
Cancel Press the Timer button select ()   press the or button
set the timer to press the button.SET
Additional options available in mode
You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.
Fan speed will be adjusted automatically according to the mode.
However, If you select mode while heating operation is on, you can adjust fan speed.
When the mode is on.
InCoolmode:Airowdirectionwillbeadjustedautomatically.
InHeatmode:Adjustingairowdirectionisavailable.
Temperature and fan speed change in mode
• Fall asleep: Eases you into sleep by dropping the temperature.
• Sound sleep: Relaxes your body and raises your temperature slightly.
• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
• Recommended set temperature is between 25
°C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.
• If the set temperature is too low, you may feel cold during sleep or catch a cold.
• Optimal operation hour of mode is 8 hours. Therefore, if the time is set too short or long, you
may not feel as comfortable as you would expect.
• If the mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the
operation time and the air conditioner will stop automatically.
• When the On timer and the function is set simultaneously, the air conditioner will only apply
the function that was set later.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 19 12/17/2015 9:54:59 AM
English-20
2-Step cooling function
2-Step Cooling function will set the air conditioner to cool the room quickly to reach the set temperature when the indoor
temperature is higher than the set temperature, and then the air conditioner will automatically operate in Dry mode when
indoor temperature reaches set temperature.
When the air conditioner is operating in Cool mode;
Remote controller display
1. Press the Options button.
2. Press the , Options or button until (2-Step) indicator starts to blink.
3. Press the SET button to set the 2-Step Cooling function.
- (2-Step) (2-Step) indicator will be displayed on the remote controller display
and 2-Step Cooling function will begin.
Cancel Press the button Options Press the , or button to Options
make the ( ) indicator blink and press the button.2-Step SET
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 20 12/17/2015 9:55:00 AM
English-21
OPTIONS04
Using the Fast function
Using the Comfort function
You can set the Comfort function to provide mild cooling/heating.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1. Press the Options button.
2. Press the , or button until (Comfort) indicator starts to blink.Options
3. Press the SET button to set the Comfort function.
- (Comfort) (Comfort) indicator will be displayed on the remote controller
display and Comfort function will begin.
Cancel Press the button Options Press the , or button to Options
make the (Comfort) indicator blink and press the SET button.
• Comfort function is only available in Cool/Heat mode.
• Vertical air swing can be adjusted.
• Set temperature can be adjusted, but fan speed cannot be adjusted.
• If the Comfort function is selected while 2-Step Cooling/ Fast / Single user/
Quiet/ function is on, corresponding function will be cancelled.
You can set the Fast function to provide fast and powerful cooling/heating.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1. Press the Options button.
2. Press the , or button until (Fast) indicator starts to blink.Options
3. Press the SET button to set the Fast function.
- (Fast) (Fast) indicator will be displayed on the remote controller display and
Fast function will begin.
Cancel Press the buttonOptions Press the , or button to Options
make the (Fast) indicator blink and press the SET button.
• Fast function is only available in Cool/Heat mode.
• Vertical air swing can be adjusted.
• Set temperature and fan speed cannot be adjusted.
• If the Fast function is selected while 2-Step Cooling/Comfort/Single user/
Quiet/ function is on, corresponding function will be cancelled.
• When you select Fast function in Heat mode, you may not be able to increase
fan speed in order to prevent any cool air from blowing.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 21 12/17/2015 9:55:03 AM
English-22
This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1. Press the button.Single user
- (Single user) indicator will be displayed on the remote controller display. Then
will be displayed on the set temperature indicator part for few
seconds and Single user function will begin.
- When the Single user function is on, vertical air swing will turn on automatically.
- If the current set temperature is lower than 24°C in Cool mode, it will be
automatically raised to 24 °C.
Cancel Press the button once again.Single user
• Single user function is only available in Cool/Heat mode.
• If the Single user function is selected while 2-Step Cooling/Fast/Comfort /
Quiet/ function is on, corresponding function will be cancelled.
• Vertical air swing will remain on even after the Single user function is
cancelled.
• Select or cancel the function with the Single User Options button.
- Press the button Options  press the , or Options button to
make (Single user) indicator blink and press the button.SET
Additional options available in Single user function
You can adjust the set temperature by 1 °C within the range of 24 °C ~ 30 °C in Cool mode and 16 °C ~ 30 °C
in Heat mode.
(Auto), (Low), (Med), (High), (Turbo) can be selected.
Vertical air swing can be selected.
Using the Single user function
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 22 12/17/2015 9:55:05 AM
English-23
OPTIONS04
Using the Quiet function
You can reduce the noise generated from an indoor unit during Cool/Heat mode.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1. Press the Options button.
2. Press the , or Options button until (Quiet) indicator starts to blink.
3. Press the SET button to set the Quiet function.
- (Quiet)(Quiet) indicator will be displayed on the remote controller display and
Quiet function will begin.
Cancel Press the button Options Press the button to , or Options
make the ( ) indicator blink and press the button.Quiet SET
Additional options available in Quiet function
You can adjust the set temperature by 1 °C within the range of
16°C ~ 30 °C.
Fan speed is set to (Auto).
Vertical air swing can be selected.
• Quiet function is only available in Cool/Heat mode.
• If the Quiet function is selected while 2-Step Cooling/Fast /Comfort/
Single user/ function is on, corresponding function will
be cancelled.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 23 12/17/2015 9:55:06 AM
English-24
Using the Virus Doctor function
This function will produce positive ions and supply them into the airow (AR**JSSS** series and AR**KSSS** series).
When the air conditioner is operating;
Remote controller display
1. Press the Options button.
2. Press the , or button until ( ) indicator starts to blink.Options
3. Press the SET button to set the Virus Doctor function.
- ( )( ) indicator will be displayed on the remote controller display and
Virus Doctor function will begin.
Cancel Press the button Options Press the , or button to Options
make the ( ) indicator blink and press the button.SET
• Virus Doctor function can be selected while Auto/Cool/Dry/Fan/Heat
mode is on.
• Set temperature can be adjusted.
• There will not be much dierence on energy consumption and
operating noise when the Virus Doctor function is selected additionally
while the other function is on.
• When the Virus Doctor function is selected with other operation mode,
pressing the Power button will stop the operation.
When the air conditioner is not in operation;
1. Press the Options button.
2. When the ( ) indicator blinks, press the button to select the SET Virus Doctor
function.
- ( )( ) indicator will be displayed on the remote controller display and
Virus Doctor function will begin.
Cancel
Press the button to make the ( ) indicator blink and press Options
the SET button.
Press the Power( ) button.
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 24 12/17/2015 9:55:09 AM
English-25
SETTINGS05
Setting the Beep sound
Beep sound from the indoor unit can be muted.
1. Press the Settings button.
2. Press the , or button until (Beep) indicator starts to blink.Settings
3. Press the SET button to mute the beep sound.
- 3 seconds after setting function, (Beep) indicator on the remote Beep sound
controller display will disappear and function will begin.Beep sound
Using the Auto clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with
clean air.
When the air conditioner is operating;
Indoor unit display
1. Press the Settings button.
2. Press the , or button until (Clean) indicator starts to blink.Settings
3. Press the SET button to set the Auto clean function.
- 3 seconds after setting function, (Clean) indicator on the remote Auto clean
controller display will disappear and Timer indicator () will turn on the indoor
unit display. Auto clean function will be activated after the air conditioner stops
operating.
- Duration of the Auto clean function can be dierent depending on the previous
operation mode used.
Auto(cool),Cool,Drymode:30minutes.
Auto(heat),Heat,Fanmode:15minutes.
Cancel Press the button Settings Press the , or button to Settings
make the (Clean) indicator blink and press the button.SET
• When the operation mode is set during Auto clean function is activated,
the air conditioner will operate in chosen operation mode and the Auto
clean function will be re-activated when the operation stops.
• Duringtheautocleanfunction,indoorfanwillcontinuetorunandair
ow blade will remain open to expel ambient air.
•  lighting in Auto clean mode.
AR**JSSS** and AR**KSSS**
AR**HSFS**
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 25 12/17/2015 9:55:11 AM
English-26
Cleaning the air conditioner
Cleaning the indoor unit
Cleaning the outdoor unit heat exchanger
Clean the product with a tepid damp cloth.
Remove the dust accumulated in the gap of the product with a soft
brush.
When dust accumulates on the heat exchanger, it may decrease cooling
performance. Therefore, clean it regularly.
Spray water to clean the dust.
• Ifitisdiculttocleantheoutdoorunitheatexchangeron
your own, contact service center.
• Contacttheservicecenterwhenyoucleantheindoorunit
heat exchanger because it needs to be disassembled.
Heat exchanger
(Illustration may dier slightly
depending on the models)
• Make sure to turn othe power of the indoor unit and cut-o
the power supply before cleaning the air conditioner.
CAUTION
•Donotcleanthedisplayusingalkalinedetergent.
•Donotusesulfuricacid,hydrochloricacid,organicsolvents
(such as thinner, kerosene and acetone etc.) to clean the
surface of the product or put any stickers on it.
They may damage the surface of the air conditioner.
CAUTION
•Becarefulwiththesharpedgesonthe
outdoor unit heat exchanger.
CAUTION
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 26 12/17/2015 9:55:12 AM
English-27
OTHERS06
Cleaning the air conditioner
Removing the Airlter
There is a hole on the bottom right side of the lter.
Put your nger in that hole to get a grip on the lter
and slightly push it up to release the hooks from the
bottom side. Then, pull it down to remove the lter
from the main body.
Cleaning the Airlter
Washable foam based air lter captures large particles from the air. Thelter is cleaned with a vacuum or by hand washing.
Remove the Air filter from the main body.
Insert the Air filter back in its original position. Dry the Air filter in a ventilated area.
Clean the Air filter with a vacuum cleaner or soft brush.
If dust is too heavy, rinse it with running water.
• CleantheAirlterevery2weeks.Cleaningtermmaydierdependingontheusageandenvironmentalconditions.
In dusty area, clean it once a week.
• IftheAirlterdriesinaconned(orhumid)area,odorsmaygenerate.Ifitoccurs,re-cleananddryitina
well-ventilated area.
Air lter
RC_GOOD_INV_A3050_IB&IM_EN_DB68-04955A-02.indd 27 12/17/2015 9:55:13 AM
English-28
Cleaning the air conditioner
Reassembling the Air lter
1. Put thelter on the main body and insert the hooks which are
in the top of the Air lter into the main body. ➀
Airlter
2. There’s one hook in both side of the lter, press the surface of
the Air lter softly and get the hooks into the main body. ➁
3. Press the bottom of thelter lightly to securely x the main
body. ➂ ➃ ➄
English-29
OTHERS06
Maintaining the air conditioner
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition.
1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours
and cut-othe power supply. There may be internal damage if moisture is left
in components.
2. Before using the air conditioner again, dry the inner components of the air
conditioner again by running in Fan mode for 3 to 4 hours. This helps remove
odors which may have generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type Description Every 2
weeks
Every 3
months
Every 4
months Once a year
Indoor
unit
Clean the Full HDlter (1)
Clean the condensate drain pan (2)
Thoroughly clean the heat exchanger (2)
Clean the cross fan (2)
Clean the condensate drain pipe (2)
Replace the remote controller batteries (1)
Outdoor
unit
Clean the heat exchanger on the outside of the unit (2)
Clean the heat exchanger on the inside of the unit (2)
Clean the electric components with jets of air (2)
Verify that all the electric components are rmly
tightened (2)
Clean the fan (2)
Verify that all the fan assembly isrmly tightened (2)
Clean the condensate drain pan (2)
: This check mark requires checking the indoor/outdoor unit periodically.
Follow the description to maintain the air conditioner properly.
(1) The described operations should be performed more frequently if
the area of installation is very dusty.
(2) These operations must always be performed by qualied personnel.
For more detailed information, see the installation part in the
manual.
CAUTION
English-30
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save
time and unnecessary expenses.
PROBLEM SOLUTION
The air conditioner
does not work at all. • Checkpowerstatusandthenoperatetheairconditioneragain.
• Pluginorswitchonthecircuitbreakerandthenoperatetheair
conditioner again.
• EnsureIsolatorisswitchon.
• CheckifyouhavesettheOTimer.Operatetheairconditioner
again by pressing the button.Power
The temperature
adjustment is not
working.
• CheckifyouhaveselectedFan/Fastmode.Inthesemodes,desired
temperature is set to auto and you cannot adjust the temperature.
Cool/Warm air does
not come out of the
air conditioner.
• Checkifthesettemperatureishigher(duringCoolmode)/lower
(during Heat mode) than the current temperature. Press the
Temp + or - button on the remote controller to change the set
temperature.
• CheckiftheAirlterisblockedbydirt.Ifthereisalotofdustonthe
Air lter, cooling (heating) performance may decrease. Clean them
frequently.
• Checkiftheoutdoorunitiscoveredorinstalledneartheobstacle.
Take the cover o and take the obstacle away.
• CheckiftheairconditionerisoperatinginDefrostmode.When
the ice formed in winter or the outdoor temperature is too low, the
air conditioner operates in Defrost mode automatically. In Defrost
mode, indoor fan stops and warm air does not come out.
• Ifthedoorsorwindowsareopen,itmaycausebadcooling
(heating) performance.
Close the doors and windows.
• Checkiftheairconditionerhasjustbeenturnedonafterstopping
cooling or heating operation. In this case, just a fan will run to
protect the outdoor unit compressor.
• Checkifthepipelengthistoolong.Whenthepipelengthexceeds
maximum allowable pipe length, cooling (heating) performance
may decrease.
Airow adjustment
is not working.
• Checkifyouhaveselected mode. In this mode, you
cannot adjust the air ow direction. (If the mode is
operating in Heat mode, you can adjust the air ow direction.)
English-31
OTHERS06
Troubleshooting
PROBLEM SOLUTION
Fan speed
adjustment is not
working.
• CheckifyouhaveselectedAuto/Dry/Fast/ mode. In
these mode, fan speed is set to Auto and you cannot adjust the fan
speed.
Remote controller is
not working. • Checkifyourbatteriesaredepleted.
• Makesurenothingisblockingyourremotecontrollersensor.
• Checkthattherearestronglightingapparatusneartheair
conditioner. Strong light which comes from uorescent bulbs or
neon signs may interrupt the electric waves.
Timer function does
not set. • CheckifyoupresstheSET button on the remote controller after
you have set the time.
The indicator
is blinking
continuously.
• PressthePower button or disconnect the power plug/switch
o the auxiliary power switch.
If the indicator is still blinking, contact the service center.
Odors permeate in
the room during
operation.
• Checkiftheapplianceisrunninginasmokyarea.Ventilatethe
room or operate the air conditioner in Fan mode for 1~2 hours.
(We do not use smelly components in the air conditioner.)
• ChecktheDrainshavebeenclearedRegularMaintenance.
Error is indicated. • Whenanindoorunitindicatorblinks,contactthenearestservice
center. Please ensure the error code is passed onto the service
center when booking the service call.
Noise is generated. • Dependingonthestatusoftheairconditionerusage,noisecanbe
heard when refrigerant ow movement changes. It is normal.
Smoke is generated
from the outdoor
unit.
• Ifmaynotbearebutitcanbeasteamgeneratedbythedefrost
operation from outdoor heat exchanger during Heat mode in
winter.
Water is dropping
from the outdoor
unit piping
connection.
• Watermaybegeneratedbecauseofthetemperaturedierence.It
is normal.
English-32
Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment.
•Alwaysdisconnecttheairconditionerfromthepowersupplybeforeservicingitoraccessingitsinternalcomponents.
•Verifythatinstallationandtestingoperationsareperformedbyqualifiedpersonnel.
•Verifythattheairconditionerisnotinstalledinaneasilyaccessiblearea.
General information
f Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order
to be able to use it as reference after installation.
For maximum safety, installers should always carefully read the following warnings.
Store the operation and installation manual in a safe location and remember to hand it over to the new owner if the air
conditioner is sold or transferred.
This manual explains how to install an indoor unit with a split system with two SAMSUNG units.
The use of other types of units with dierent control systems may damage the units and invalidate the warranty.
The manufacturer shall not be responsible for damages arising from the use of non compliant units.
This product has been determined to be in compliance with the Low Voltage Directive (2006/95/EC), and the
Electromagnetic Compatibility Directive (2004/108/EC) of the European Union.
The manufacturer shall not be responsible for damage originating from unauthorized changes or the improper connection
of electric and requirements set forth in the “Operating limits” table, included in the manual, shall immediately invalidate
the warranty.
 Theairconditionershouldbeusedonlyfortheapplicationsforwhichithasbeendesigned:theindoorunitisnotsuitable
to be installed in areas used for laundry.
Do not use the units if damaged. If problems occur, switch the unit oand disconnect it from the power supply.
In order to h prevent electric shocks, res or injuries, always stop the unit, disable the protection switch and contact elp
SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.
Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly. These operations
should be performed by qualied personnel only.
The unit contains moving parts, which should always be kept out of the reach of children.
Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations may
cause electric shocks or res.
Do not place containers with liquids or other objects on the unit.
All the materials used for the manufacture and packaging of the air conditioner are recyclable.
The packing material and exhaust batteries of the remote controller (optional) must be disposed of in accordance with
current laws.
The air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air
conditioner must be disposed of in authorized centers or returned to the retailer so that it can be disposed of correctly and
safely.
Safety precautions

Especificaciones del producto

Marca: Samsung
Categoría: No categorizado
Modelo: AR12KSSSTWKXJO

¿Necesitas ayuda?

Si necesitas ayuda con Samsung AR12KSSSTWKXJO haz una pregunta a continuación y otros usuarios te responderán


No categorizado Samsung Manuales

Samsung

Samsung RS78CG8543B1 Manual de Usario

27 Octubre 2024
Samsung

Samsung SRS694NLS Manual de Usario

27 Octubre 2024
Samsung

Samsung RR22M287YU3 Manual de Usario

25 Octubre 2024
Samsung

Samsung MM-DT10 Manual de Usario

23 Octubre 2024
Samsung

Samsung HG32AJ570NK Manual de Usario

13 Octubre 2024
Samsung

Samsung RH77J90407H Manual de Usario

8 Octubre 2024
Samsung

Samsung CS-21M20ML Manual de Usario

7 Octubre 2024
Samsung

Samsung QB43B Manual de Usario

7 Octubre 2024
Samsung

Samsung CS-21A11MH Manual de Usario

4 Octubre 2024
Samsung

Samsung MR-EH01 Manual de Usario

3 Octubre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024