Samsung SSA-P400 Manual de Usario

Samsung Barra de sonido SSA-P400

Lee a continuación 📖 el manual en español para Samsung SSA-P400 (80 páginas) en la categoría Barra de sonido. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/80

Quick Guide

SSA-P400

SSA-P400T

SSA-P401

SSA-P401T

Contents

Product Introduction 2

Installation and External Connection 6

Initialization 14

ENG FRE GER SPA ITA

Product Introduction

WHAT’S INCLUDED

Check if the following items are included in the product package.

xGn

Main Unit Quick Guide

CD Manual Diode (x12)

(UF4004, 1N4001~4007)

Main Board

1 2 3

11121314

QUICK GUIDE

English_3

ENG

Board ID Setup Switch

The address number speciﬁ ed by the address setup switch should

match that of the host computer as it is used for communications with

the host computer.

I/O Board Connection Port

Communication ports to connect to the I/O board, which include Input

#8 through Input #15 and Output #8 through Output #15.

System Initialization Switch

Pressing both of the switches at the same time for about 2 seconds will

sound initialization ready beep. Releasing both switches will stop the

beep, and restarts the system after the initialization.

Output (Relay #1 ~ Relay #4)

Ports

4 relay outputs (FORM-C(COM, NO, NC)) are provided. (DC12~18V,

Max Current 2A)

5Output (TTL #1 ~ TTL #3)

Ports Address Setup Switch

3 TTL output ports are provided.

The voltage depends on the output occurrence, DC 0V for no output

occurrence, and DC 5V for any output occurrence.

6RJ-45 Connect the LAN cable for TCP/IP communications.

7RS-232 Communication Port One RS-232 communication port is provided. Used to exclusively

connect to a PC in a local area.

8RS-422 Communication Port One RS-422 communication port is provided.

You can establish up to 32 multi-drop communications.

Power Connection Port

DC +12V is used for the power source.

10 LED Extension Port

Port used to extend the power and communication indicators so that

they can display in an external device.

TCP/IP Module LED Indicator

For TCP/IP module communications, the status of the TCP/IP module

will be provided additionally.

Power LED Indicator

Power connection status indicator. It always stays ON while the power

is applied.

Output LED Indicator Output status indicator for the output port. A ﬂ ashing indicator denotes

the occurrence of any output.

Keypad Connection Port Optional item.

LCD Connection Port Optional item.

TCP/IP Module Connection Port

The TCP/IP module is optional so it is not provided by default.

Communication can be established using the built-in TCP/IP module.

Communication with the PC can be established using the built-in TCP/

IP module.

Firmware ROM This must be replaced before the ﬁ rmware update; you can check the

current ﬁ rmware version.

Reader #1 Port The ﬁ rst reader connection port.

Reader #2 Port The second reader connection port.

Reader #3 Port The third reader connection port.

Reader #4 Port The fourth reader connection port.

Especificaciones del producto

Marca:	Samsung
Categoría:	Barra de sonido
Modelo:	SSA-P400
Color del producto:	Zwart
Peso.:	14000 g
Ancho:	205 mm
Profundidad:	507 mm
Altura:	514 mm
Amable:	PC
factor vorm:	Midi Tower
Número de puertos USB 2.0:	2
Suministro de red:	750 W
Entradas de audio:	Ja
Salida de audio:	Ja
Peso (imperial):	30.9 lbs
Ranuras de expansión:	7
Número de puertos eSATA:	1
Bahías para unidades externas:	4 x 5.25"; 1 x 3.5"
Bahías-de-unidades-internas:	6 x 3.5" HDD, 2 x 2.5" SSD
Ventilator(en):	1 rear 120mm x 25mm, 1 top 120mm x 25mm
Ventiladores opcionales:	3 x 120mm