Sanus ELM202 Manual de Usario

Sanus No categorizado ELM202

Lee a continuación 📖 el manual en español para Sanus ELM202 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Sanus Systems

2221 Hwy 36 West

Saint Paul, MN 55113 USA

Customer Service

800-359-5520 • 651-484-7988 • info@sanus.com

sanus.com

All other brand names or marks are used for identiﬁ cation purposes and are trademarks of their respective owners.

ELM202 Surge Protector

(6901-100200 <02>)

Speci cations

2100 Joule surge suppression

EMI/RFI noise  ltration

Gold-plated coaxial input and outputs

UL Listed

UL Electrical Rating: 15A Max/125Vac/60Hz/1875W

Voltage Protection Rating: 400V(L-N) 500V(L-G) 400V(N-G)

Warranty

Your Sanus ELM202 Surge protector has a  ve year product warranty

against manufacturer’s defects. If you have any questions or experience

any problems with your Sanus Elements Surge Protector, please contact

Sanus Systems Customer Service at 1-800-359-5520.

Both the “Ground” and “Surge” lights illuminate to

indicate that the surge protector is working. If

either light fails to illuminate, replace the surge

protector.

From wall phone outlet

To phone / fax modem

From wall, DSS, cable, or other coaxial output

To TV, VCR, or other coaxial input

GROUND

SURGE

OUT INOUT IN

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT

CAUTION:

Avoid potential personal injury or property damage!

Do not disassemble the surge protector. Disassembling will void the

warranty and may cause serious personal injury.

Disconnect the surge protector during lightning storms.

To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors!

Risk of Electrical Shock. Do not plug into another relocatable power tap.

This device features an internal protection that will disconnect the surge

protective component at the end of its useful life but will maintain power

to the load - now unprotected. If this situation is undesirable for the

application, follow the manufacturer’s instructions for replacing the device.

Do not install this device if there is not at least 10 meters (30 feet) or more

of wire between the electrical outlet and the electrical service panel.

The input plug of this power tap is intended to serve as the disconnect

device, it shall be easily accessible and withdrawn.

Do not use this product for any purpose not explicitly speci ed by Sanus

Systems.

If you do not understand these instructions, or have doubts about the

safety of the installation, assembly or use of this product, contact Sanus

Systems Customer Service or call a quali ed contractor.

Sanus Systems is not responsible for damage or injury caused by incorrect

assembly or use.

6901-100200 <02>

Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information

contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this

document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no