Scosche SAVW-6 Manual de Usario

Lee a continuación 📖 el manual en español para Scosche SAVW-6 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
1. Use the adaptor bracket (with slot located at the top) as a template to mark and drill
mounting holes securing speaker to adaptor bracket as shown here. before
2. Place supplied speed clips over mounting holes with the flat sides out.
3. Connect speaker wires to new speaker. Feed wires through slot in top of bracket.
Secure speaker to bracket using hardware supplied and connect wires to
vehicle speaker wires.
Note: See wiring instructions in the Crutchfield for your particular vehicle.MasterSheet
Speaker Adaptor Bracket
142 SAVW6
Parts
Supplied:
4
(2) Brackets (8) Phillips
Screws
Revision 02/05/14
*142SAVW6*
(8) Speed
Clips
Always be careful when drilling in a vehicle. WEAR EYE
PROTECTION. Be aware of things such as wiring, windows,
fuel lines and safety devices. Check drilling depth and
location to avoid damage to vehicle appearance.
CAUTION:
!
Copyright 2014 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
(8) Nuts (8) Washers (8) Cinch
Screws
Slot
(for wires)
Drill new mounting holes
and place speed clips
over holes.
Tools Required
Phillips
Screwdriver
Drill &
1/8” Bit
1/4" Wrench
4

Especificaciones del producto

Marca: Scosche
Categoría: No categorizado
Modelo: SAVW-6

¿Necesitas ayuda?

Si necesitas ayuda con Scosche SAVW-6 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Scosche Manuales

No categorizado Manuales

Últimos No categorizado Manuales