SereneLife SLSWNG100GN Manual de Usario

Lee a continuación 📖 el manual en español para SereneLife SLSWNG100GN (7 páginas) en la categoría Fitnessapparaat. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
Flying Fun Toy Swing
SLSWNG100GN
Indoor/Outdoor Hanging Rope
Swinging Seat Spinner (Green)
www.SereneLifeHome.com
2
Safety and Assembly Instructions
IMPORTANT
READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS.
KEEP FOR FUTRUE REFERENCE
WARNING! CHOKING HAZARD-SMALL PARTS, NOT FOR CHILDREN
UNDER 3 YEARS. WARNING! MAXIMUM WEIGHT SHOULD NOT
EXCEED 400LBS.
WARNING! DO NOT USE WITHOUT ADULT SUPERVISION!
WARNING! ADULT ASSEMBLING REQUIRED!
ESSENTIAL INFORMATION
Recommended for children 3+ years
Do not leave child unattended while in use
CAUTION: Use only under adult supervision
Good safety practices should be followed at all times
Read all instruction before using this product.
Hanging hardware not included. Ideally, the swing body should be hung
over grass, sand, wood chips, or other soft surfaces.
Under no circumstances should it be hung over concrete, asphalt, or other
hard surfaces. Distance from ground should not exceed 15.7 inch; the
maximum fall height should not be more than 18 inch. Two S hooks are
attached to the rope to allow for adjustment of the rope length. Please be
sure to examine the ropes regularly. If the color of the rope has become
pale, frays easily, or gives o a powdery material when rubbed between
the ngers, we recommend you replace the rope. Equipment should be
hung in such a way that a distance of at least 6.56 ft is clear on either side.
Can be hung on an A-frame or swing set or on a tree limb of a diameter of
at least 9.84 inch.
WARNING! Small parts for assembly by an adult.
You may also follow the SereneLife Set Up Instructions Video For Spider Web
Tree Saucer Swing: https://youtu.be/XRoeWAHdOHA
www.SereneLifeHome.com 3
Tools Required (included in the packaging)
Assembling Steps
1. Swings arrives in 4 pcs.
and 2 hanging ropes,
a jump body for
assembly.
2. Put the jump body
on the oor, and put
the 4 section to the
black mat direction.
3. Put the 4 metal tube
with foam into the
sleeves one by one.
4. Put the tube 5. Put 2nd tube to the
sleeve, small socket
to the big socket of
the 1st. tube, and
connect it.
6. Repeat it, and make it
like half folded as the
pic.

Especificaciones del producto

Marca: SereneLife
Categoría: Fitnessapparaat
Modelo: SLSWNG100GN

¿Necesitas ayuda?

Si necesitas ayuda con SereneLife SLSWNG100GN haz una pregunta a continuación y otros usuarios te responderán




Fitnessapparaat SereneLife Manuales

Fitnessapparaat Manuales

Últimos Fitnessapparaat Manuales