Silva Exceed 4X Manual de Usario

Silva Lámpara Exceed 4X

Lee a continuación 📖 el manual en español para Silva Exceed 4X (13 páginas) en la categoría Lámpara. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
CHOOSE YOUR LANGUAGE:
FULL VERSION MANUAL
EXCEED 4X Art. no 37983
To mount the helmet bracket, remove the protective film covering the adhesive tape. Make
sure the surface of the helmet is clean and dry. Press the bracket onto its correct position.
If you do not want to use the adhesive on your helmet the attachment is prepared for mount-
ing with 2 or more straps on the sides. (Not included)
Attach the headlamp in the helmet bracket by sliding the headlamp bracket into the snap-in
socket. To remove, slide the headlamp up and out of the bracket.
Attach the cable by using the back cable guide or integrated helmet strap.
Depending on helmet type, it might be preferable to use the Helmet modeFlow light deac-
tivated, when the headlamp is used on a helmet.
The headband is designed to fit on a helmet by detaching the battery holderthus giving
you the flexibility to use either the included helmet bracket or to just snap the headlamp onto
your helmet and go.
tery energy remains. This is done by flashing both LEDs for 1 second.
RESERVE MODE
During operation, the lamp will go into reserve mode when there is 10% power left of the bat-
tery. All LEDs will flash before the lamp goes into this mode.
Reserve mode can be overridden by pressing the button.
Warning: If you have pressed the button when headlamp is in reserve mode no more low bat-
tery warnings will appear before the headlamp turns OFF.
BATTERY STATUS INDICATION
When battery is connected and the headlamp is switched on - the current battery status will
automatically be visible for 30 seconds. To check battery status during use, the headlamp
has to be switched OFF and then back ON again.
5 green LEDs = Fully charged
4 green LEDs = 80% of the battery remains
3 green LEDs = 60% of the battery remains
2 green LEDs = 40% of the battery remains
1 red LED = 20% of the battery remains
To get as much power as possible out from your battery, keep it away from low temperatures
during use.
Visit: www.silva/environment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.
Visit: www.silva/environment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.

Especificaciones del producto

Marca: Silva
Categoría: Lámpara
Modelo: Exceed 4X

¿Necesitas ayuda?

Si necesitas ayuda con Silva Exceed 4X haz una pregunta a continuación y otros usuarios te responderán




Lámpara Silva Manuales

Lámpara Manuales

Últimos Lámpara Manuales